ATM2-MIB Table View

The ATM SVPC Cross-Connect table.  A
bi-directional VP cross-connect between two
switched VPLs is modeled as one entry in this
table.  A Soft PVPC cross-connect, between a
soft permanent VPL and a switched VPL, is
also modeled as one entry in this table.

atmSvcVpCrossConnectEntry row .1.3.6.1.2.1.37.1.14.1.1.1

An entry in the ATM SVPC Cross-Connect table.
This entry is used to model a bi-directional
ATM VP cross-connect between two VPLs.

Indexes

atmSvcVpCrossConnectIndex atmSvcVpCrossConnectLowIfIndex atmSvcVpCrossConnectLowVpi atmSvcVpCrossConnectHighIfIndex atmSvcVpCrossConnectHighVpi

Column	Syntax	OID
atmSvcVpCrossConnectIndex A unique value to identify this SVPC cross-connect. For each VP associated with this cross-connect, the agent reports this cross-connect index value in the atmVplCrossConnectIdentifer attribute of the co…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.37.1.14.1.1.1.1
atmSvcVpCrossConnectLowIfIndex The value of this object is equal to the ifIndex value of the ATM interface port for this SVPC cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM inte…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.37.1.14.1.1.1.2
atmSvcVpCrossConnectLowVpi The value of this object is equal to the VPI value associated with the SVPC cross-connect at the ATM interface that is identified by atmSvcVpCrossConnectLowIfIndex. The VPI value cannot exceed the number supported by t…	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.37.1.14.1.1.1.3
atmSvcVpCrossConnectHighIfIndex The value of this object is equal to the ifIndex value of the ATM interface port for this SVC VP cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.37.1.14.1.1.1.4
atmSvcVpCrossConnectHighVpi The value of this object is equal to the VPI value associated with the SVPC cross-connect at the ATM interface that is identified by atmSvcVpCrossConnectHighIfIndex. The VPI value cannot exceed the number supported by …	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.37.1.14.1.1.1.5
atmSvcVpCrossConnectCreationTime The value of the sysUpTime object at the time this bi-directional SVPC cross-connect was created. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero valu…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.37.1.14.1.1.1.6
atmSvcVpCrossConnectRowStatus This object is used to delete rows in the atmSvcVpCrossConnectTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.1.1.7

The ATM SVCC Cross-Connect table.  A
bi-directional VC cross-connect between two
switched VCLs is modeled as one entry in
this table.  A Soft PVCC cross-connect,
between a soft permanent VCL and a switched
VCL, is also modeled as one entry in this
table.

atmSvcVcCrossConnectEntry row .1.3.6.1.2.1.37.1.14.1.2.1

An entry in the ATM SVCC Cross-Connect table.
This entry is used to model a bi-directional ATM
VC cross-connect between two VCLs.

Indexes

atmSvcVcCrossConnectIndex atmSvcVcCrossConnectLowIfIndex atmSvcVcCrossConnectLowVpi atmSvcVcCrossConnectLowVci atmSvcVcCrossConnectHighIfIndex atmSvcVcCrossConnectHighVpi atmSvcVcCrossConnectHighVci

Column	Syntax	OID
atmSvcVcCrossConnectIndex A unique value to identify this SVCC cross-connect. For each VP associated with this cross-connect, the agent reports this cross-connect index value in the atmVclCrossConnectIdentifier attribute of the corresponding atm…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.37.1.14.1.2.1.1
atmSvcVcCrossConnectLowIfIndex The value of this object is equal to the ifIndex value of the ATM interface port for this SVCC cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.37.1.14.1.2.1.2
atmSvcVcCrossConnectLowVpi The value of this object is equal to the VPI value associated with the SVCC cross-connect at the ATM interface that is identified by atmSvcVcCrossConnectLowIfIndex. The VPI value cannot exceed the number supported by t…	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.37.1.14.1.2.1.3
atmSvcVcCrossConnectLowVci The value of this object is equal to the VCI value associated with the SVCC cross-connect at the ATM interface that is identified by atmSvcVcCrossConnectLowIfIndex. The VCI value cannot exceed the number supported by t…	ATM-TC-MIBAtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.2.1.37.1.14.1.2.1.4
atmSvcVcCrossConnectHighIfIndex The value of this object is equal to the ifIndex value for the ATM interface port for this SVCC cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM i…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.37.1.14.1.2.1.5
atmSvcVcCrossConnectHighVpi The value of this object is equal to the VPI value associated with the SVCC cross-connect at the ATM interface that is identified by atmSvcVcCrossConnectHighIfIndex. The VPI value cannot exceed the number supported by …	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.37.1.14.1.2.1.6
atmSvcVcCrossConnectHighVci The value of this object is equal to the VCI value associated with the SVCC cross-connect at the ATM interface that is identified by atmSvcVcCrossConnectHighIfIndex. The VCI value cannot exceed the number supported by …	ATM-TC-MIBAtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.2.1.37.1.14.1.2.1.7
atmSvcVcCrossConnectCreationTime The value of the sysUpTime object at the time this bi-directional SVCC cross-connect was created. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero valu…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.37.1.14.1.2.1.8
atmSvcVcCrossConnectRowStatus This object is used to delete rows in the atmSvcVcCrossConnectTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.2.1.9

This table contains ATM interface signalling
statistics, one entry per ATM signalling
interface.

atmSigStatEntry row .1.3.6.1.2.1.37.1.14.1.3.1

This list contains signalling statistics variables.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmSigSSCOPConEvents SSCOP Connection Events Counter. This counter counts the sum of the following errors: 1) SSCOP Connection Disconnect Counter The abnormal occurrence of this event is characterized …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.1
atmSigSSCOPErrdPdus SSCOP Errored PDUs Counter. This counter counts the sum of the following errors: 1) Invalid PDUs. These are defined in SSCOP and consist of PDUs with an incorrect length (MAA-ERROR code U), an u…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.2
atmSigDetectSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts (both successful and unsuccessful) detected on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.3
atmSigEmitSetupAttempts Call Setup Attempts Counter. This counter counts the number of call setup attempts (both successful and unsuccessful) transmitted on this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.4
atmSigDetectUnavailRoutes Number of Route Unavailability detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS messag…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.5
atmSigEmitUnavailRoutes Number of Route Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.6
atmSigDetectUnavailResrcs Number of Resource Unavailability detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS me…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.7
atmSigEmitUnavailResrcs Number of Resource Unavailability transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STAT…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.8
atmSigDetectCldPtyEvents Number of Called Party Responsible For Unsuccessful Call detected on this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PAR…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.9
atmSigEmitCldPtyEvents Number of Called Party Responsible For Unsuccessful Call transmitted from this interface. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), AD…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.10
atmSigDetectMsgErrors Number of Incorrect Messages detected on this interface. The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: - RELEASE, RELEASE COMPLETE, ADD PARTY REJ…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.11
atmSigEmitMsgErrors Number of Incorrect Messages transmitted on this interface. The Incorrect Messages Counter reflects any sort of incorrect information in a message. This includes: - RELEASE, RELEASE COMPLETE, ADD PARTY R…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.12
atmSigDetectClgPtyEvents Number of Calling Party Events detected on this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPLETE (…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.13
atmSigEmitClgPtyEvents Number of Calling Party Events transmitted from this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPL…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.14
atmSigDetectTimerExpireds Number of Timer Expiries detected on this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this count…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.15
atmSigEmitTimerExpireds Number of Timer Expiries transmitted from this interface. The Timer Expiries Counter provides a count of network timer expiries, and to some extent, host or switch timer expiries. The conditions for incrementing this co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.16
atmSigDetectRestarts Number of Restart Activity errors detected on this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when receiving a RESTART message.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.17
atmSigEmitRestarts Number of Restart Activity errors transmitted from this interface. The Restart Activity Counter provides a count of host, switch, or network restart activity. This counter is incremented when transmitting a RESTART me…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.18
atmSigInEstabls Number of SVCs established at this signalling entity for incoming connections.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.19
atmSigOutEstabls Number of SVCs established at this signalling entity for outgoing connections.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.3.1.20

This table contains ATM local interface configuration
parameters, one entry per ATM signalling interface.

atmSigSupportEntry row .1.3.6.1.2.1.37.1.14.1.4.1

This list contains signalling configuration parameters
and state variables.

Indexes

IF-MIBifIndex

Column	Syntax	OID
atmSigSupportClgPtyNumDel This object indicates whether the Calling Party Number Information Element is transferred to the called party address. The value of this object can be: - enabled(1) This Information Element is transfe…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.1
atmSigSupportClgPtySubAddr This object indicates whether to accept and transfer the Calling Party Subaddress Information Element from the calling party to the called party. Calling party subaddress information shall only be transferred to the ca…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.2
atmSigSupportCldPtySubAddr This object indicates whether to accept, transfer, and deliver the Called Party Subaddress Information Element from the calling party to the called party. The value of this object can be: - enabled(1) …	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.3
atmSigSupportHiLyrInfo This object indicates whether to accept, transfer, and deliver the Broadband High Layer Information Element from the calling party to the called party. The value of this object can be: - enabled(1) Th…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.4
atmSigSupportLoLyrInfo This object indicates whether to accept, transfer, and deliver the Broadband Low Layer Information Element from the calling party to the called party. The value of this object can be: - enabled(1) Thi…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.5
atmSigSupportBlliRepeatInd This object indicates whether to accept, transfer, and deliver the Broadband Repeat Indicator with two or three instances of the Broadband Low Layer Information Element for low layer information selection from the calli…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.6
atmSigSupportAALInfo This object indicates whether to accept, transfer, and deliver the ATM Adaptation Layer Parameters Information Element from the calling party to the called party. The value of this object can be: - ena…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.37.1.14.1.4.1.7
atmSigSupportPrefCarrier This parameter identifies the carrier to which intercarrier calls originated from this interface are routed when transit network selection information is not provided by the calling party. If a Carrier Identification C…	OctetStringr/w Constraints: range: 4-4 range: 0-0	.1.3.6.1.2.1.37.1.14.1.4.1.8

A table contains signalling capabilities of VCLs except the
Traffic Descriptor.  Traffic descriptors are described in
the atmTrafficDescrParamTable.

atmSigDescrParamEntry row .1.3.6.1.2.1.37.1.14.1.5.1

Each entry in this table represents a
set of signalling capabilities that can
be applied to a VCL. There is no requirement
for unique entries, except that the index must
be unique.

Indexes

atmSigDescrParamIndex

Column	Syntax	OID
atmSigDescrParamIndex The value of this object is used by the atmVclGenSigDescrIndex object in the atmVclGenTable to identify a row in this table.	ATM-TC-MIBAtmSigDescrParamIndex Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.37.1.14.1.5.1.1
atmSigDescrParamAalType The AAL type. The value of this object is set to other(1) when not defined.	Enumerationr/w Enumerated Values: 1 other 2 aal1 3 aal34 4 aal5 5 userDefined 6 aal2	.1.3.6.1.2.1.37.1.14.1.5.1.2
atmSigDescrParamAalSscsType The SSCS type used by this entry.	Enumerationr/w Enumerated Values: 1 other 2 assured 3 nonassured 4 frameRelay 5 null	.1.3.6.1.2.1.37.1.14.1.5.1.3
atmSigDescrParamBhliType The Broadband high layer type.	Enumerationr/w Enumerated Values: 1 other 2 iso 3 user 4 hiProfile 5 vendorSpecific	.1.3.6.1.2.1.37.1.14.1.5.1.4
atmSigDescrParamBhliInfo The Broadband high layer information. When atmSigDescrParamBhliType is set to iso(2), the value of this object is a zero length string. When atmSigDescrParamBhliType is set to user(3), the value of this object is an o…	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.2.1.37.1.14.1.5.1.5
atmSigDescrParamBbcConnConf The Broadband bearer capability user plane connection configuration parameter.	Enumerationr/w Enumerated Values: 1 ptp 2 ptmp	.1.3.6.1.2.1.37.1.14.1.5.1.6
atmSigDescrParamBlliLayer2 The Broadband low layer information, protocol type of layer 2. The value of this object is other(1) if layer 2 protocol is not used.	Enumerationr/w Enumerated Values: 1 other 2 iso1745 3 q921 4 x25linklayer 5 x25multilink 6 lapb 7 hdlcArm 8 hdlcNrm 9 hdlcAbm 10 iso88022 11 x75slp 12 q922 13 userDef 14 iso7776	.1.3.6.1.2.1.37.1.14.1.5.1.7
atmSigDescrParamBlliLayer3 The Broadband low layer information, protocol type of layer 3. The value of this object is other(1) if layer 3 protocol is not used.	Enumerationr/w Enumerated Values: 1 other 2 x25pkt 3 isoiec8208 4 x223iso8878 5 isoiec8473 6 t70 7 tr9577 8 userDef	.1.3.6.1.2.1.37.1.14.1.5.1.8
atmSigDescrParamBlliPktSize The default packet size defined in B-LLI.	Enumerationr/w Enumerated Values: 1 other 2 s16 3 s32 4 s64 5 s128 6 s256 7 s512 8 s1024 9 s2048 10 s4096	.1.3.6.1.2.1.37.1.14.1.5.1.9
atmSigDescrParamBlliSnapId The SNAP ID used for Broadband low layer protocol layer 3. The value of this object is other(1) if atmSigDescrParamBlliLayer3 is set to other(1).	Enumerationr/w Enumerated Values: 1 other 2 true 3 false	.1.3.6.1.2.1.37.1.14.1.5.1.10
atmSigDescrParamBlliOuiPid The OUI/PID encoding for Broadband low layer protocol layer 3. The value of this object is a zero length string if atmSigDescrParamBlliLayer3 is set to other(1). When used, it is always 5 octets with the most signific…	OctetStringr/w Constraints: range: 5-5 range: 0-0	.1.3.6.1.2.1.37.1.14.1.5.1.11
atmSigDescrParamRowStatus This object is used to create and delete rows in the atmSigDescrParamTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.5.1.12

This table contains a list of ATM addresses that can be used for
calls to and from a given interface by a switch or service.  The
ATM addresses are either registered by the endsystem via ILMI or
statically configured.  This table does not expose PNNI
reachability information.  ILMI registered addresses cannot be
deleted using this table.  This table only applies to switches
and network services.

atmIfRegisteredAddrEntry row .1.3.6.1.2.1.37.1.14.1.6.1

An entry in the ATM Interface Registered Address table.

Indexes

IF-MIBifIndex atmIfRegAddrAddress

Column	Syntax	OID
atmIfRegAddrAddress An address registered for a given switch or service interface.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.37.1.14.1.6.1.1
atmIfRegAddrAddressSource The type of address source for a given ATM Address. The value dynamic(3) is indicated when ILMI is used.	Enumeration Enumerated Values: 1 other 2 static 3 dynamic	.1.3.6.1.2.1.37.1.14.1.6.1.2
atmIfRegAddrOrgScope This object indicates the organizational scope for the referenced address. The information of the referenced address shall not be distributed outside the indicated scope. Refer to Annex 5.3 of ATM Forum UNI Signallin…	Enumerationr/w Enumerated Values: 1 localNetwork 2 localNetworkPlusOne 3 localNetworkPlusTwo 4 siteMinusOne 5 intraSite 6 sitePlusOne 7 organizationMinusOne 8 intraOrganization 9 organizationPlusOne 10 communityMinusOne 11 intraCommunity 12 communityPlusOne 13 regional 14 interRegional 15 global	.1.3.6.1.2.1.37.1.14.1.6.1.3
atmIfRegAddrRowStatus This object is used to create and delete rows in the atmIfRegisteredAddrTable. Rows created dynamically (e.g., ILMI- registered addresses) cannot be deleted using this object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.6.1.4

This table provides a mapping between the atmVclTable and
the ATM called party/calling party address.  This table can
be used to retrieve the calling party and called party ATM
address pair for a given VCL.  Note that there can be more
than one pair of calling party and called party ATM
addresses for a VCL in a point to multi-point call.

atmVclAddrEntry row .1.3.6.1.2.1.37.1.14.1.7.1

Each entry in this table represents a binding between a VCL
and an ATM address associated with this call. This ATM

address can be either the called party address or the
calling party address. There can be…

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmVclAddrAddr

Column	Syntax	OID
atmVclAddrAddr An ATM address on one end of the VCL. For SVCs, the agent supplies the value of this object at creation time. For PVC VCL, the manager can supply the value of this object during or after the PVC VCL creation.	ATM-TC-MIBAtmAddr Type Constraints: range: 0..40	.1.3.6.1.2.1.37.1.14.1.7.1.1
atmVclAddrType The type of ATM Address represented by the object atmVclAddrAddr. Choices are either the calling party ATM address or the called party ATM address.	Enumerationr/w Enumerated Values: 1 callingParty 2 calledParty	.1.3.6.1.2.1.37.1.14.1.7.1.2
atmVclAddrRowStatus This object is used to create or destroy an entry from this table. Note that the manager entity can only destroy the PVC VCLs.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.7.1.3

This table provides an alternative way to retrieve the
atmVclTable.  This table can be used to retrieve the
indexing to the atmVclTable by an ATM address.

atmAddrVclEntry row .1.3.6.1.2.1.37.1.14.1.8.1

Each entry in this table represents an entry in the
atmVclTable of the ATM-MIB by its ATM address. The ATM
address is either the calling or called party ATM address
of the call. Entries in this table are read only.
Th…

Indexes

atmVclAddrAddr atmAddrVclAtmIfIndex atmAddrVclVpi atmAddrVclVci

Column	Syntax	OID
atmAddrVclAtmIfIndex The interface index of the ATM interface to which this VCL pertains. This object combined with the atmAddrVclVpi and atmAddrVclVci objects serves as an index to the atmVclTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.37.1.14.1.8.1.1
atmAddrVclVpi The VPI value of the VCL. This object combined with the atmAddrVclAtmIfIndex and atmAddrVclVci objects serves as an index to the atmVclTable.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.37.1.14.1.8.1.2
atmAddrVclVci The VCI value of the VCL. This object combined with the atmAddrVclAtmIfIndex and atmAddrVclVpi objects serves as an index to the atmVclTable.	ATM-TC-MIBAtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.2.1.37.1.14.1.8.1.3
atmAddrVclAddrType The type of ATM Address represented by the object atmVclAddrAddr. Choices are either calling party address or called party address.	Enumeration Enumerated Values: 1 callingParty 2 calledParty	.1.3.6.1.2.1.37.1.14.1.8.1.4

This table contains all statistics counters per VPL.  It is
used to monitor the usage of the VPL in terms of incoming
cells and outgoing cells.

atmVplStatEntry row .1.3.6.1.2.1.37.1.14.1.9.1

Each entry in this table represents a VPL.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column	Syntax	OID
atmVplStatTotalCellIns The total number of valid ATM cells received by this VPL including both CLP=0 and CLP=1 cells. The cells are counted prior to the application of the traffic policing.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.1
atmVplStatClp0CellIns The number of valid ATM cells received by this VPL with CLP=0. The cells are counted prior to the application of the traffic policing.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.2
atmVplStatTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.3
atmVplStatClp0Discards The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.4
atmVplStatTotalCellOuts The total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.5
atmVplStatClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VPL.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.6
atmVplStatClp0Tagged The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.9.1.7

Indicates whether the VPL is an ATM Logical Port interface
(ifType=80).

atmVplLogicalPortEntry row .1.3.6.1.2.1.37.1.14.1.10.1

An entry with information about the ATM Logical Port
interface.

Indexes

No indexes recorded

Column	Syntax	OID
atmVplLogicalPortDef Indicates whether the VPC at this VPL interface is an ATM Logical Port interface.	Enumerationr/w Enumerated Values: 1 notLogicalIf 2 isLogicalIf	.1.3.6.1.2.1.37.1.14.1.10.1.1
atmVplLogicalPortIndex The ifTable index of the ATM logical port interface associated with this VPL. The distinguished value of zero indicates that the agent has not (yet) assigned such an ifTable Index. The zero value must be assigned by the…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.37.1.14.1.10.1.2

This table contains all statistics counters per VCL.  It is
used to monitor the usage of the VCL in terms of incoming
cells and outgoing cells.

atmVclStatEntry row .1.3.6.1.2.1.37.1.14.1.11.1

Each entry in this table represents a VCL.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column	Syntax	OID
atmVclStatTotalCellIns The total number of valid ATM cells received by this VCL including both CLP=0 and CLP=1 cells. The cells are counted prior to the application of the traffic policing.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.1
atmVclStatClp0CellIns The number of valid ATM cells received by this VCL with CLP=0. The cells are counted prior to the application of the traffic policing.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.2
atmVclStatTotalDiscards The total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.3
atmVclStatClp0Discards The total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.4
atmVclStatTotalCellOuts The total number of valid ATM cells transmitted by this VCL. This includes both CLP=0 and CLP=1 cells.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.5
atmVclStatClp0CellOuts The total number of valid ATM cells transmitted with CLP=0 by this VCL.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.6
atmVclStatClp0Tagged The total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.11.1.7

This table provides a collection of objects providing AAL5
configuration and performance statistics of a VCL.

atmAal5VclStatEntry row .1.3.6.1.2.1.37.1.14.1.12.1

Each entry in this table represents an AAL5 VCL, and
is indexed by ifIndex values of AAL5 interfaces and
the associated VPI/VCI values.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column	Syntax	OID
atmAal5VclInPkts The number of AAL5 CPCS PDUs received on the AAL5 VCC at the interface identified by the ifIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.12.1.1
atmAal5VclOutPkts The number of AAL5 CPCS PDUs transmitted on the AAL5 VCC at the interface identified by the ifIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.12.1.2
atmAal5VclInOctets The number of octets contained in AAL5 CPCS PDUs received on the AAL5 VCC at the interface identified by the ifIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.12.1.3
atmAal5VclOutOctets The number of octets contained in AAL5 CPCS PDUs transmitted on the AAL5 VCC at the interface identified by the ifIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.12.1.4

General Information for each VC.

atmVclGenEntry row .1.3.6.1.2.1.37.1.14.1.13.1

An entry with general information about the ATM VC.

Indexes

No indexes recorded

Column	Syntax	OID
atmVclGenSigDescrIndex The value of this object identifies the row in the ATM Signalling Descriptor Parameter Table which applies to this VCL.	ATM-TC-MIBAtmSigDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.37.1.14.1.13.1.1

This table contains ATM interface configuration and monitoring
information not defined in the atmInterfaceConfTable from the
ATM-MIB.  This includes the type of connection setup procedures,
ILMI information, and information on the VPI/VCI range.

atmInterfaceExtEntry row .1.3.6.1.2.1.37.1.14.1.14.1

An entry extends the atmInterfaceConfEntry defined in the ATM-
MIB. Each entry corresponds to an ATM interface.

Indexes

No indexes recorded

Column	Syntax	OID
atmIntfConfigType The type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not allowed.	ATM-TC-MIBAtmInterfaceTyper/w Type Values: 1 other 2 autoConfig 3 ituDss2 4 atmfUni3Dot0 5 atmfUni3Dot1 6 atmfUni4Dot0 7 atmfIispUni3Dot0 8 atmfIispUni3Dot1 9 atmfIispUni4Dot0 10 atmfPnni1Dot0 11 atmfBici2Dot0 12 atmfUniPvcOnly 13 atmfNniPvcOnly	.1.3.6.1.2.1.37.1.14.1.14.1.1
atmIntfActualType The type of connection setup procedures currently being used on the interface. This may reflect a manually configured value for the interface type, or may be determined by other means such as auto-configuration. A val…	ATM-TC-MIBAtmInterfaceType Type Values: 1 other 2 autoConfig 3 ituDss2 4 atmfUni3Dot0 5 atmfUni3Dot1 6 atmfUni4Dot0 7 atmfIispUni3Dot0 8 atmfIispUni3Dot1 9 atmfIispUni4Dot0 10 atmfPnni1Dot0 11 atmfBici2Dot0 12 atmfUniPvcOnly 13 atmfNniPvcOnly	.1.3.6.1.2.1.37.1.14.1.14.1.2
atmIntfConfigSide The configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfConfigType is set to `autoConfig', `atmfPnni1Dot0', or `atmfBici2Dot0'.	Enumerationr/w Enumerated Values: 1 other 2 user 3 network	.1.3.6.1.2.1.37.1.14.1.14.1.3
atmIntfActualSide The current role used by the managed entity to represent one side of the ATM interface.	Enumeration Enumerated Values: 1 other 2 user 3 network 4 symmetric	.1.3.6.1.2.1.37.1.14.1.14.1.4
atmIntfIlmiAdminStatus Indicates which components of ILMI are administratively enabled on this interface. If the 'ilmi' bit is not set, then no ILMI components are operational. ILMI components other than auto- configuration that are not rep…	Bitsr/w Enumerated Values: 0 ilmi 1 ilmiAddressRegistration 2 ilmiConnectivity 3 ilmiPvcPvpMgmt 4 ilmiSigVccParamNegotiation	.1.3.6.1.2.1.37.1.14.1.14.1.5
atmIntfIlmiOperStatus Indicates which components of ILMI are operational on this interface.	Bits Enumerated Values: 0 ilmi 1 ilmiAddressRegistration 2 ilmiConnectivity 3 ilmiPvcPvpMgmt 4 ilmiSigVccParamNegotiation	.1.3.6.1.2.1.37.1.14.1.14.1.6
atmIntfIlmiFsmState Indicates the state of the ILMI Finite State Machine associated with this interface.	Enumeration Enumerated Values: 1 stopped 2 linkFailing 3 establishing 4 configuring 5 retrievingNetworkPrefixes 6 registeringNetworkPrefixes 7 retrievingAddresses 8 registeringAddresses 9 verifying	.1.3.6.1.2.1.37.1.14.1.14.1.7
atmIntfIlmiEstablishConPollIntvl The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.37.1.14.1.14.1.8
atmIntfIlmiCheckConPollIntvl The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on thi…	secondsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.37.1.14.1.14.1.9
atmIntfIlmiConPollInactFactor The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.37.1.14.1.14.1.10
atmIntfIlmiPublicPrivateIndctr Specifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type.	Enumerationr/w Enumerated Values: 1 other 2 public 3 private	.1.3.6.1.2.1.37.1.14.1.14.1.11
atmInterfaceConfMaxSvpcVpi The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path connections.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.2.1.37.1.14.1.14.1.12
atmInterfaceCurrentMaxSvpcVpi The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual path connections. This value is the minimum of atmInterfaceConfMaxSvpcVpi, and the atmInterfaceMaxSvpcVpi of the …	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.37.1.14.1.14.1.13
atmInterfaceConfMaxSvccVpi The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.2.1.37.1.14.1.14.1.14
atmInterfaceCurrentMaxSvccVpi The maximum VPI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. This value is the minimum of atmInterfaceConfMaxSvccVpi, and the atmInterfaceConfMaxSvccVpi …	Integer32 Constraints: range: 0-4095	.1.3.6.1.2.1.37.1.14.1.14.1.15
atmInterfaceConfMinSvccVci The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual channel connections.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.37.1.14.1.14.1.16
atmInterfaceCurrentMinSvccVci The minimum VCI that the signalling stack on the ATM interface may currently allocate to switched virtual channel connections. This value is the maximum of atmInterfaceConfMinSvccVci, and the atmInterfaceConfMinSvccVci …	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.37.1.14.1.14.1.17
atmIntfSigVccRxTrafficDescrIndex This object identifies the row in the atmTrafficDescrParamTable used during ILMI auto-configuration to specify the advertised signalling VCC traffic parameters for the receive direction. The traffic descriptor resulting…	ATM-TC-MIBAtmTrafficDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.37.1.14.1.14.1.18
atmIntfSigVccTxTrafficDescrIndex This object identifies the row in the atmTrafficDescrParamTable used during ILMI auto-configuration to specify the advertised signalling VCC traffic parameters for the transmit direction. The traffic descriptor resultin…	ATM-TC-MIBAtmTrafficDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.2.1.37.1.14.1.14.1.19
atmIntfPvcFailures The number of times the operational status of a PVPL or PVCL on this interface has gone down.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.14.1.20
atmIntfCurrentlyFailingPVpls The current number of VPLs on this interface for which there is an active row in the atmVplTable having an atmVplConnKind value of `pvc' and an atmVplOperStatus with a value other than `up'.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.14.1.21
atmIntfCurrentlyFailingPVcls The current number of VCLs on this interface for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and an atmVclOperStatus with a value other than `up'.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.14.1.22
atmIntfPvcFailuresTrapEnable Allows the generation of traps in response to PVCL or PVPL failures on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.37.1.14.1.14.1.23
atmIntfPvcNotificationInterval The minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface.	secondsInteger32r/w Constraints: range: 1-3600	.1.3.6.1.2.1.37.1.14.1.14.1.24
atmIntfLeafSetupFailures Number of setup failures. For root, this is the number of rejected setup requests and for leaf, this is the number of setup failure received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.14.1.25
atmIntfLeafSetupRequests Number of setup requests. For root, this includes both incoming setup request and root intiated setup requests.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.37.1.14.1.14.1.26

This table contains a list of all the ATM network services known
by this device.
          
The characteristics of these services are made available through
the ILMI, using the ILMI general-purpose service registry MIB.
These services may be made available to all ATM interfaces
(atmIlmiSrvcRegIndex = 0) or to some specific ATM interfaces only
(atmIlmiSrvcRegIndex = ATM interface index).

atmIlmiSrvcRegEntry row .1.3.6.1.2.1.37.1.14.1.15.1

Information about a single service provider that is available to
the user-side of an adjacent device through the ILMI.

Implementors need to be aware that if the size of the
atmIlmiSrvcRegServiceID exceeds 1…

Indexes

atmIlmiSrvcRegIndex atmIlmiSrvcRegServiceID atmIlmiSrvcRegAddressIndex

Column	Syntax	OID
atmIlmiSrvcRegIndex The ATM interface where the service defined in this entry can be made available to an ATM device attached to this interface. The value of 0 has a special meaning: when an ATM service is defined in an entr…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.37.1.14.1.15.1.1
atmIlmiSrvcRegServiceID This is the service identifier which uniquely identifies the type of service at the address provided in the table. The object identifiers for the LAN Emulation Configuration Server (LECS) and the ATM Nam…	ObjectIdentifier	.1.3.6.1.2.1.37.1.14.1.15.1.2
atmIlmiSrvcRegAddressIndex An arbitrary integer to differentiate multiple rows containing different ATM addresses for the same service on the same interface. This number need NOT be the same as the corresponding ILMI atmfSrvcRegAddressIndex MIB …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.2.1.37.1.14.1.15.1.3
atmIlmiSrvcRegATMAddress This is the full address of the service. The user-side of the adjacent device may use this address to establish a connection with the service.	ATM-TC-MIBAtmAddrr/w Type Constraints: range: 0..40	.1.3.6.1.2.1.37.1.14.1.15.1.4
atmIlmiSrvcRegParm1 An octet string used according to the value of atmIlmiSrvcRegServiceID.	OctetStringr/w Constraints: range: 1-255	.1.3.6.1.2.1.37.1.14.1.15.1.5
atmIlmiSrvcRegRowStatus This object is used to create or destroy an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.15.1.6

A table specifying per-interface network prefix(es) supplied by
the network side of the UNI during ILMI address registration.
When no network prefixes are specified for a particular
interface, one or more network prefixes based on the switch
address(es) may be used for ILMI address registration.

atmIlmiNetworkPrefixEntry row .1.3.6.1.2.1.37.1.14.1.16.1

Information about a single network prefix supplied by the
network side of the UNI during ILMI address registration. Note
that the index variable atmIlmiNetPrefixPrefix is a variable-
length string, and as such the rule…

Indexes

IF-MIBifIndex atmIlmiNetPrefixPrefix

Column	Syntax	OID
atmIlmiNetPrefixPrefix The network prefix specified for use in ILMI address registration.	ATM-TC-MIBAtmIlmiNetworkPrefix Type Constraints: range: 8 range: 13	.1.3.6.1.2.1.37.1.14.1.16.1.1
atmIlmiNetPrefixRowStatus Used to create, delete, activate and de-activate network prefixes used in ILMI address registration.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.16.1.2

This table contains one or more ATM endsystem addresses on a
per-switch basis.  These addresses are used to identify the
switch.  When no ILMI network prefixes are configured for certain
interfaces, network prefixes based on the switch address(es) may
be used for ILMI address registration.

atmSwitchAddressEntry row .1.3.6.1.2.1.37.1.14.1.17.1

An entry in the ATM Switch Address table.

Indexes

atmSwitchAddressIndex

Column	Syntax	OID
atmSwitchAddressIndex An arbitrary index used to enumerate the ATM endsystem addresses for this switch.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.37.1.14.1.17.1.1
atmSwitchAddressAddress An ATM endsystem address or address prefix used to identify this switch. When no ESI or SEL field is specified, the switch may generate the ESI and SEL fields automatically to obtain a complete 20-byte ATM endsystem ad…	OctetStringr/w Constraints: range: 20-20 range: 13-13	.1.3.6.1.2.1.37.1.14.1.17.1.2
atmSwitchAddressRowStatus Used to create, delete, activate, and de-activate addresses used to identify this switch.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.37.1.14.1.17.1.3

This table contains one row per VP Cross-Connect represented in
the atmVpCrossConnectTable.

atmVpCrossConnectXEntry row .1.3.6.1.2.1.37.1.14.1.18.1

Information about a particular ATM VP Cross-Connect.
Each entry provides an two objects that name the Cross-Connect.
One is assigned by the Service User and the other by the Service
Provider.

Indexes

No indexes recorded

Column	Syntax	OID
atmVpCrossConnectUserName This is a service user assigned textual representation of a VPC PVC.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.2.1.37.1.14.1.18.1.1
atmVpCrossConnectProviderName This is a system supplied textual representation of VPC PVC. It is assigned by the service provider.	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.37.1.14.1.18.1.2

This table contains one row per VC Cross-Connect represented in
the atmVcCrossConnectTable.

atmVcCrossConnectXEntry row .1.3.6.1.2.1.37.1.14.1.19.1

Information about a particular ATM VC Cross-Connect.
Each entry provides an two objects that name the Cross-Connect.
One is assigned by the Service User and the other by the Service
Provider.

Indexes

No indexes recorded

Column	Syntax	OID
atmVcCrossConnectUserName This is a service user assigned textual representation of a VCC PVC.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.2.1.37.1.14.1.19.1.1
atmVcCrossConnectProviderName This is a system supplied textual representation of VCC PVC. It is assigned by the service provider.	OctetString Constraints: range: 0-255	.1.3.6.1.2.1.37.1.14.1.19.1.2

A table indicating all VPLs for which there is an active row in
the atmVplTable having an atmVplConnKind value of `pvc' and an
atmVplOperStatus with a value other than `up'.

atmCurrentlyFailingPVplEntry row .1.3.6.1.2.1.37.1.14.1.20.1

Each entry in this table represents a VPL for which the
atmVplRowStatus is `active', the atmVplConnKind is `pvc', and the
atmVplOperStatus is other than `up'.

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi

Column	Syntax	OID
atmCurrentlyFailingPVplTimeStamp The time at which this PVPL began to fail.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.37.1.14.1.20.1.1

A table indicating all VCLs for which there is an active row in
the atmVclTable having an atmVclConnKind value of `pvc' and an
atmVclOperStatus with a value other than `up'.

atmCurrentlyFailingPVclEntry row .1.3.6.1.2.1.37.1.14.1.21.1

Each entry in this table represents a VCL for which the
atmVclRowStatus is `active', the atmVclConnKind is `pvc', and the
atmVclOperStatus is other than `up'.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column	Syntax	OID
atmCurrentlyFailingPVclTimeStamp The time at which this PVCL began to fail.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.37.1.14.1.21.1.1