atmIlmiSrvcRegIndex

ATM2-MIB · .1.3.6.1.2.1.37.1.14.1.15.1.1
Commands MIB view Table view

Object

column IF-MIBInterfaceIndexOrZero 
The ATM interface where the service defined in this entry can be
made available to an ATM device attached to this interface.
              
The value of 0 has a special meaning: when an ATM service is
defined in an entry whose atmIlmiSrvcRegIndex is zero, the ATM
service is available to ATM devices connected to any ATM
interface.  (default value(s)).
              
When the user-side of an adjacent device queries the content of
the ILMI service registry MIB (using the ILMI protocol), the
local network-side responds with the ATM services defined in
atmIlmiSrvcRegTable entries, provided that these entries are
indexed by:
              
- the corresponding ifIndex value (atmIlmiSrvcRegIndex
  equal to the ifIndex of the interface to which the
  adjacent device is connected) - zero (atmIlmiSrvcRegIndex=0).

Context

MIB
ATM2-MIB
OID
.1.3.6.1.2.1.37.1.14.1.15.1.1
Type
column
Access
noaccess
Status
current
Parent
atmIlmiSrvcRegEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ATM2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM2-MIB::atmIlmiSrvcRegIndex'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ATM2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ATM2-MIB::atmIlmiSrvcRegIndex.<atmIlmiSrvcRegIndex>.<atmIlmiSrvcRegServiceID>.<atmIlmiSrvcRegAddressIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ATM2-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ATM2-MIB::atmIlmiSrvcRegIndex'

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32
Display format
d
Type Description
This textual convention is an extension of the
InterfaceIndex convention.  The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system.  This extension permits the
additional value of zero.  the value zero is object-specific
and must therefore be defined as part of the description of
any object which uses this syntax.  Examples of the usage of
zero might include situations where interface was unknown,
or when none or all interfaces need to be referenced.

Values & Constraints

Type Constraints
range: 0..2147483647