ATM-SOFT-PVC-MIB Table View

The (conceptual) table used to manage Soft
Permanent Virtual Channel Connections (Soft PVCCs).
The Soft PVCC table is applicable only to switches.

atmSoftPVccEntry row .1.3.6.1.4.1.353.5.5.1.1.2.1

Each entry in this table represents a Soft
Permanent Virtual Channel Connection (Soft PVCC)
originating at a switch interface.

A Soft PVCC is a VCC that is:
- provisioned at the originating (source)
int…

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmSoftPVccLeafReference

Column	Syntax	OID
atmSoftPVccLeafReference An arbitrary integer which, in the case of the source VCL having an atmVclCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVCC. If the atmVclC…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.5.1.1.2.1.1
atmSoftPVccTargetAddress The target ATM Address of this Soft PVCC. If no address is supplied, no attempts to establish the Soft PVCC are initiated.	AtmAddrr/w Type Constraints: range: 0 range: 8 range: 20	.1.3.6.1.4.1.353.5.5.1.1.2.1.2
atmSoftPVccTargetSelectType Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI values. In such a case, once the Soft PVCC at…	Enumerationr/w Enumerated Values: 1 required 2 any	.1.3.6.1.4.1.353.5.5.1.1.2.1.3
atmSoftPVccTargetVpi The VPI value of the VCL used at the target interface. This value is not relevant when the value of atmSoftPVccTargetSelectType is 'any'.	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.353.5.5.1.1.2.1.4
atmSoftPVccTargetVci The VCI value of the VCL used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'.This value is not relevant when the value of atmSoftPVccTargetSelectType is…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.5.1.1.2.1.5
atmSoftPVccLastReleaseCause Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC. Indicates the reason for the Release.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.353.5.5.1.1.2.1.6
atmSoftPVccLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVCC.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.353.5.5.1.1.2.1.7
atmSoftPVccOperStatus Describes the status of the Soft PVCC. Valid values are: other - none of the types specified below establishmentInProgress - connection or party is not operational, but s…	Enumeration Enumerated Values: 1 other 2 establishmentInProgress 3 connected 4 retriesExhausted 5 noAddressSupplied 6 lowerLayerDown	.1.3.6.1.4.1.353.5.5.1.1.2.1.8
atmSoftPVccRestart When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperStatus object transitions to 'establishmentInProgress' (if not…	Enumerationr/w Enumerated Values: 1 restart 2 noop	.1.3.6.1.4.1.353.5.5.1.1.2.1.9
atmSoftPVccRetryInterval Defines the period to wait before attempting to establish the Soft PVCC after the first failed call attempt. The time to wait between subsequent call attempts may differ to implement a backoff scheme. Zero represents a…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.353.5.5.1.1.2.1.10
atmSoftPVccRetryTimer Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. When the timer is not running, the value zero shall be returned.	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.4.1.353.5.5.1.1.2.1.11
atmSoftPVccRetryThreshold Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attemp…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.5.1.1.2.1.12
atmSoftPVccRetryFailures Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVCC is restarted.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.5.1.1.2.1.13
atmSoftPVccRetryLimit Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. sett…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.5.1.1.2.1.14
atmSoftPVccRowStatus Used to create and delete a Soft PVCC. When this object is set to 'active' an attempt is made to set up the Soft PVCC. When this object has the value 'active' and is set to another value, any set-up or connection in-pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.5.1.1.2.1.15

The (conceptual) table used to manage Soft
Permanent Virtual Path Connections (Soft PVPCs)
The Soft PVPC table is applicable only to switches.

atmSoftPVpcEntry row .1.3.6.1.4.1.353.5.5.1.1.3.1

Each entry in this table represents a Soft
Permanent Virtual Path Connection (Soft PVPC)
originating at a switch interface.

A Soft PVPC is a VPC that is:
- provisioned at the originating (source)
interf…

Indexes

IF-MIBifIndex ATM-MIBatmVplVpi atmSoftPVpcLeafReference

Column	Syntax	OID
atmSoftPVpcLeafReference An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'p2mpRoot', serves to distinguish between the multiple leaves attached to a root of a point-to-multipoint Soft PVPC. If…	Integer32 Constraints: range: 1-63535	.1.3.6.1.4.1.353.5.5.1.1.3.1.1
atmSoftPVpcTargetAddress The target ATM Address of this Soft PVPC. If no address is supplied, no attempts to establish the Soft PVPC are initiated.	AtmAddrr/w Type Constraints: range: 0 range: 8 range: 20	.1.3.6.1.4.1.353.5.5.1.1.3.1.2
atmSoftPVpcTargetSelectType Indicates whether the target VPI value is to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In such a case, once the Soft PVPC atmSoftPVpcOperStatus value …	Enumerationr/w Enumerated Values: 1 required 2 any	.1.3.6.1.4.1.353.5.5.1.1.3.1.3
atmSoftPVpcTargetVpi The VPI value of the VPL used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value is not relevant when the value of atmSoftPVpcTarge…	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.353.5.5.1.1.3.1.4
atmSoftPVpcLastReleaseCause Value of the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC. Indicates the reason for the Release.	Integer32 Constraints: range: 1-127	.1.3.6.1.4.1.353.5.5.1.1.3.1.5
atmSoftPVpcLastReleaseDiagnostic Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last RELEASE signalling message received for this Soft PVPC.	OctetString Constraints: range: 0-8	.1.3.6.1.4.1.353.5.5.1.1.3.1.6
atmSoftPVpcOperStatus Describes the status of the Soft PVPC. other - none of the types specified below establishmentInProgress - connection or party is not operational, but setup or add …	Enumeration Enumerated Values: 1 other 2 establishmentInProgress 3 connected 4 retriesExhausted 5 noAddressSupplied 6 lowerLayerDown	.1.3.6.1.4.1.353.5.5.1.1.3.1.7
atmSoftPVpcRestart When the value is set to 'restart', the Soft PVPC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperStatus object transitions to 'establishmentInProgress' (if no…	Enumerationr/w Enumerated Values: 1 restart 2 noop	.1.3.6.1.4.1.353.5.5.1.1.3.1.8
atmSoftPVpcRetryInterval Defines the period to wait before attempting to establish the Soft PVPC after the first failed call attempt. The time to wait between subsequent call attempts may differ to implement a backoff scheme. Zero represents …	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.4.1.353.5.5.1.1.3.1.9
atmSoftPVpcRetryTimer Indicates the current value of the retry timer for this connection. When the value reaches zero an attempt will be made to establish the Soft PVPC. When the timer is not running, the value zero shall be returned.	secondsInteger32 Constraints: range: 0-86400	.1.3.6.1.4.1.353.5.5.1.1.3.1.10
atmSoftPVpcRetryThreshold Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A value of zero indicates that an infinite number of call attemp…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.5.1.1.3.1.11
atmSoftPVpcRetryFailures Indicates how many attempts to establish the connection have failed. This count is reset whenever a connection is successfully established or the Soft PVPC is restarted.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.5.1.1.3.1.12
atmSoftPVpcRetryLimit Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit is reached then management action will be required (e.g. sett…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.5.1.1.3.1.13
atmSoftPVpcRowStatus Used to create and delete a Soft PVPC. When this object is set to 'active' an attempt is made to set up the Soft PVPC. When this object has the value 'active' and is set to another value, any set-up or connection in-pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.5.1.1.3.1.14

This table is used to configure ATM addresses at 
an ATM interface on this node prior to setting up
Soft PVPCs or Soft PVPCs at that interface.

atmInterfaceSoftPvcAddressEntry row .1.3.6.1.4.1.353.5.5.1.1.4.1

ATM address entry for configuring Soft PVCCs or
Soft PVPCs at an ATM interface.

Indexes

IF-MIBifIndex atmInterfaceSoftPvcAddress

Column	Syntax	OID
atmInterfaceSoftPvcAddress Specifies the address that can be used to establish a Soft PVCC or Soft PVPC to this interface.	AtmAddr Type Constraints: range: 0 range: 8 range: 20	.1.3.6.1.4.1.353.5.5.1.1.4.1.1
atmInterfaceSoftPvcAddressRowStatus Used to create and delete an ATM address at this interface for setting up Soft PVCCs or Soft PVPCs.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.5.1.1.4.1.2

A table indicating all Soft Permanent Virtual Channel
Connections (Soft PVCCs) for which the atmSoftPVccRowStatus
is 'active' and the atmSoftPVccOperStatus is other than
'connected'.

atmCurrentlyFailingSoftPVccEntry row .1.3.6.1.4.1.353.5.5.1.1.5.1

Each entry in this table represents a Soft Permanent
Virtual Channel Connection (Soft PVCC) for which the
atmSoftPVccRowStatus is 'active' and the
atmSoftPVccOperStatus is other than 'connected'.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci atmSoftPVccLeafReference

Column	Syntax	OID
atmCurrentlyFailingSoftPVccTimeStamp The time at which this Soft PVCC began to fail.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.5.1.1.5.1.1

A table indicating all Soft Permanent Virtual Path
Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus
is 'active' and the atmSoftPVpcOperStatus is other than
'connected'.

atmCurrentlyFailingSoftPVpcEntry row .1.3.6.1.4.1.353.5.5.1.1.6.1

Each entry in this table represents a Soft Permanent
Virtual Path Connection (Soft PVPC) for which the
atmSoftPVpcRowStatus is 'active' and the
atmSoftPVpcOperStatus is other than 'connected'.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi atmSoftPVpcLeafReference

Column	Syntax	OID
atmCurrentlyFailingSoftPVpcTimeStamp The time at which this Soft PVPC began to fail.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.5.1.1.6.1.1