ASAM-EQUIP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
196

eqptHolderTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.2 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptHolderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptHolderTable' 
Equipment holder table, representing the system, the racks and
the shelves.
          
This table contains one row for the system, one row per rack,
and one row per shelf.
          
ALCATEL NOTE:
   SUPPORT: YES  TABLESIZE: DEP as described above
eqptHolderEntry row .1.3.6.1.4.1.637.61.1.23.2.1
An entry of the equipment holder table.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptHolderIdmandatory
Index in equipment holder Table.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
EqptHolderIndex
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.637.61.1.23.2.1.1
eqptHolderClassmandatory
Classification of shelves. This object has no meaning for the
system and the rack equipment holders.

Note: for ISAM, only the values mainEthernet (4) and extEthernet (5)
are allowed.

…
Enumerationr/w
Enumerated Values:
1mainIqHcl
2extIq
3extHcl
4mainEthernet
5extEthernet
 .1.3.6.1.4.1.637.61.1.23.2.1.2
eqptHolderPlannedTypemandatory
A string representing the planned type of equipment holder.
If the equipment holder is planned, the string consists of a
mnemonic, identifying the holder type.
This object is only writable for the entries that represent…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.2.1.3
eqptHolderActualTypemandatory
A string representing the actual equipment holder type.

Following values are possible:

<HOLDER_MNEMONIC> Indicates the detected equipment holder-type.
Uses same mnemonics …
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.2.1.4
eqptHolderAdminStatusmandatory
Used by the administrator to lock or unlock an equipment holder.
This attribute is only supported for shelves.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: …
Enumerationr/w
Enumerated Values:
1unlock
2lock
 .1.3.6.1.4.1.637.61.1.23.2.1.5
eqptHolderOperStatusmandatory
This attribute identifies whether or not the equipment holder is
capable of performing its normal functions.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: NO DEFVALUE: NA UNI…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.637.61.1.23.2.1.6
eqptHolderOperErrormandatory
This attribute describes for what reason the equipment holder is
not operational. These values correspond with the alarms that are
generated in case of a failure.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD:…
Enumeration
Enumerated Values:
1no-error
2type-mismatch
3holder-missing
4holder-installation-missing
15defense
 .1.3.6.1.4.1.637.61.1.23.2.1.7
eqptHolderAvailStatusmandatory
This attribute indicates whether the equipment holder is
available or not.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1, 3, 5, 6
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
1available
3failed
5notInstalled
6offLine
 .1.3.6.1.4.1.637.61.1.23.2.1.8
eqptHolderDescriptionmandatory
Text-field, which can for instance be used to describe the
location of the equipment holder.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: '' UNITS: -
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.637.61.1.23.2.1.9
eqptHolderContainerIdmandatory
This attribute describes in which equipment holder the equipment
holder is contained.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.

ALCA…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.2.1.10
eqptHolderContainerOffsetmandatory
This attribute describes the position of the equipment holder
in the containing equipment holder.
This object is only meaningful for racks and shelves, since the
system itself has no containing equipment holder.
…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.2.1.11
eqptHolderModemandatory
This attribute identifies the holder mode and is used by
both the NEP shelf and the ARAM-E shelf:
ntbntio-supported: this mode works in the same manner as iSAM XD. The
LSM can only be used on LSM slot. NT in NTB is supp…
Enumerationr/w
Enumerated Values:
1ntbntio-supported
2ntbntio-unsupported
3ntb-unsupported
4ntbntioextlt-unsupported
6ntio-unsupported
7ngpon-supported
8gpon-supported
9ngpon-port-reduced
 .1.3.6.1.4.1.637.61.1.23.2.1.12
eqptHolderSerialNumbermandatory
This attribute represents the serial number of the shelf.

NOT available If FIM < 25 in RI, this attribute could not be retrieved.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: S…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.2.1.13
eqptHolderVariantmandatory
This attribute represents the ALU code of the shelf.

NOT available If FIM < 25 in RI, this attribute could not be retrieved.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See abov…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.2.1.14
eqptHolderICScodemandatory
This attribute represents the Item Change Status iteration
code of the shelf.

NOT available If FIM < 25 in RI, this attribute could not be retrieved.

ALCATEL NOTE:
SUPPORT: YES INSRV…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.2.1.15

eqptBoardTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.3 · 1 row entry · 32 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptBoardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptBoardTable' 
A table representing the slots of all planned shelves. Each slot
can hold a board of one of the following types: NT, EXT, LSM,
ACU, CTRL, applique.
          
This table has a row for each slot in each planned shelf.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above
eqptBoardEntry row .1.3.6.1.4.1.637.61.1.23.3.1
An entry in the eqptBoardTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptSlotIdmandatory
A unique value to identify a slot position.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -
EqptSlotIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.3.1.1
eqptSlotPlannedTypemandatory
A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is planned in the slot. If the board is planned, the string consists
of a mnemonic that identifies the board-type.

Following mnemo…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.2
eqptSlotActualTypemandatory
A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is actually present in the slot.

Following values are possible:

<BOARD_MNEMONIC> Indicates the detected board-type.…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.3
eqptSlotPowerStatusmandatory
This attribute is used by the operator to power-up or power-down
an LSM slot. This attribute is not supported for other type of slots.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIS…
Enumerationr/w
Enumerated Values:
1powerUp
2powerDown
 .1.3.6.1.4.1.637.61.1.23.3.1.4
eqptBoardAdminStatusmandatory
This attribute is used by the operator to lock or unlock the board.

This attribute is only supported for the following type of boards:
NT (but notice that the system will refuse a request to lock the NT
o…
Enumerationr/w
Enumerated Values:
1unlock
2lock
 .1.3.6.1.4.1.637.61.1.23.3.1.5
eqptBoardOperStatusmandatory
This attribute informs the operator whether the plug-in unit is able
to perform its normal operation.

This attribute is supported for all type of boards: NT, EXT, LSM,
ACU, CTRL, applique.

…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.637.61.1.23.3.1.6
eqptBoardOperErrormandatory
This attribute describes for what reason the board is not operational.
These values correspond with the alarms which are generated in case of
a failure.

This attribute is supported for all type of boards:…
Enumeration
Enumerated Values:
1no-error
2type-mismatch
3board-missing
4board-installation-missing
5no-planned-board
6waiting-for-sw
7init-boot-failed
8init-download-failed
9init-connection-failed
10init-configuration-failed
11board-reset-protection
12invalid-parameter
13temperature-alarm
14tempshutdown
15defense
16board-not-licensed
17sem-power-fail
18sem-ups-fail
19board-in-incompatible-slot
21download-ongoing
255unknown-error
 .1.3.6.1.4.1.637.61.1.23.3.1.7
eqptBoardAvailStatusmandatory
This attribute provides further information regarding the state
of the board. It is set to available after a successfull selftest
of the board (if applicable).

This attribute is supported for all type of …
Enumeration
Enumerated Values:
1available
2inTest
3failed
4powerOff
5notInstalled
6offLine
7dependency
 .1.3.6.1.4.1.637.61.1.23.3.1.8
eqptBoardRestartmandatory
Writing a valid value to this object will restart the board in the
specified mode.

This attribute is only supported for the following type of boards:
NT, EXT, managed LSM, ACU, CTRL. For ACU and CTRL boa…
Enumerationr/w
Enumerated Values:
1with-selftest
2without-selftest
5hot-restart
255initialValue
 .1.3.6.1.4.1.637.61.1.23.3.1.9
eqptBoardSwOverruleStatusmandatory
Used to overrule the default software version for this board.
This attribute is only supported for managed LSMs.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: NO DEFVALUE: 1 …
Enumerationr/w
Enumerated Values:
1no-overrule
2overrule
 .1.3.6.1.4.1.637.61.1.23.3.1.10
eqptBoardContainerIdmandatory
This attribute describes in which equipment holder the slot
is contained.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.3.1.11
eqptBoardContainerOffsetmandatory
This attribute describes the position of the slot in the
containing equipment holder.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.3.1.12
eqptBoardInventoryAlcatelCompanyIdmandatory
This attribute represents the company of the board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.13
eqptBoardInventoryTypeNamemandatory
This attribute represents the name of the board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.14
eqptBoardInventoryPBACodemandatory
This attribute represents the Alcatel Printed Board Assembly
code of of the board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.15
eqptBoardInventoryFPBACodemandatory
This attribute represents the Alcatel Printed Board Assembly
code of the board, which also identifies the boot software.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEF…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.16
eqptBoardInventoryICScodemandatory
This attribute represents the Item Change Status iteration
code of the board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.17
eqptBoardInventoryCLEICodemandatory
This attribute represents the (USA) Common Language Equipment
Identification code of the board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.18
eqptBoardInventorySerialNumbermandatory
This attribute represents the serial number of the board.

Breakdown of a sample serial number is :

sample NANT-D serial number is AA1003ZA028

AA 10 03 ZA028
…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.3.1.19
eqptBoardInventoryLastFailedTestmandatory
Identifies the last failing test by means of 4 numbers, from MSB
to LSB:
- Table number (1 byte)
- Segment number (1 byte)
- Case number (1 byte)
- Check number (1 byte)
As long as there has been no failing …
OctetString
Constraints:
range: 4-4
 .1.3.6.1.4.1.637.61.1.23.3.1.20
eqptSlotPlannedCapabilityProfilemandatory
A pointer to the capability profile that will be used for this
slot. Capability profiles are only applicable for LT cards
that are not EXT_MANAGED and not UNMANAGED,NRNT-A and NTIO cards.
Planning the profile should alw…
ASAM-TC-MIBAsamProfilePointerr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.23.3.1.22
eqptBoardCustAlarmProfilemandatory
A pointer to the customizable alarms profile which will be
associated to NT for all shelves except FD-REM where the
customizable alarms profile will be associated to master LT.
In redundant NT shelves the profile will b…
ASAM-TC-MIBAsamProfilePointerr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.23.3.1.23
eqptBoardLastRestartCausemandatory
This attribute gives the last restart cause for board.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD…
Enumeration
Enumerated Values:
1poweron
2unknown
3watchdog
4coldreset
5warmreset
6hotreset
7hotreload
8cleandata
9emergencybuild
10poweronreset
11commitfailure
12timezonemodified
 .1.3.6.1.4.1.637.61.1.23.3.1.24
eqptBoardLastRestartTimemandatory
This attribute gives the last restart time.
Currently only LSM board can support. Considering future safe,
only use default value for other board entry.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RAN…
ASAM-TC-MIBNetworkTimeInSeconds
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.3.1.25
eqptBoardRestartNumberOfChangesmandatory
Wrap around counter which indicates the number of restart times.
This counter is incremented each time eqptBoardLastRestartTime
changes. Considering future safe, only use default value for
other board entry.
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.3.1.26
eqptBoardRelatedMgntEntityIPAddressmandatory
Network address. It is a public OAM IP address related to xVPS. For
single OAM IP is introduced, multi-xVPS boards existing on a same shelf
may use one single OAM IP. This IP is configured on NT which manages
…
RFC1155-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.637.61.1.23.3.1.27
eqptBoardRelatedMgntEntityPairedNumbermandatory
For single OAM IP is introduced, one public OAM IP can not identify an
xVPS, so community string is introduced. Each active xVPS will have
different community string in one shelf.

ALCATEL NOTE:
SUPPORT:…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.3.1.28
eqptBoardDualHostIPAddressmandatory
Network address. Only applicable for FD REM connected to dual host.
It is the public OAM IP address of the host connecting the Lsm in this
externally managed slot. It is instantiated with default value and
can only be s…
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.637.61.1.23.3.1.29
eqptBoardDualHostLsmLocationmandatory
Only applicable for FD REM connected to dual host.
It is the Rack/Shelf identifying the location of this
externally managed slot, within the scope of the host connecting
the Lsm. The slot component is implicitly presen…
EqptHolderIndexOrZeror/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.637.61.1.23.3.1.30
eqptBoardIfSlotIdmandatory
This object gives the slot's linear number, which could be
used by an external manager to help in mapping a given
IfIndex to a physical slot location. It is a numerical value
that consists of 6 bits. For a slot that doe…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.3.1.32
eqptBoardRestartCountPerLtmandatory
Wrap around counter which indicates the number of restart times per LT.
This counter is incremented each time eqptBoardLastRestartTime
changes.This counter will reset to zero when LT replaced or unplanned.
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.3.1.33
eqptBoardClearRestartCountPerLtmandatory
This object is a button-like object to reset the eqptBoardRestartCountPerLt counter.
When it is set to true(1) value then the corresponding eqptBoardRestartCountPerLt counter is cleared.

A value set to fa…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.637.61.1.23.3.1.34

eqptShelfSummaryTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.4 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptShelfSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptShelfSummaryTable' 
Shelf summary table, summarizing slot or board related status
changes within each shelf.
          
This table has one row per planned shelf.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above.
eqptShelfSummaryEntry row .1.3.6.1.4.1.637.61.1.23.4.1
An entry of the shelf summary table.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptShelfHwNumberOfChangesmandatory
Wrap around counter which indicates the number of configuration or
status changes for slots/boards within this shelf. This counter
is incremented each time any of the summary table objects of this
shelf changes.
…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.4.1.1
eqptShelfSlotSummaryOccupationmandatory
Bitmap of the occupation of slots (0 = empty, 1 = full)
Applicable for NT, EXT, LSM, ACU, CTRL, applique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNI…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.2
eqptShelfBoardSummaryAdminmandatory
Bitmap of the administrative state of the boards
(0 = locked, 1 = unlocked). Applicable for NT, EXT, LSM.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UN…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.3
eqptShelfBoardSummaryAvailmandatory
Bitmap of the availability state of the boards (0 = not available,
1 = available). Applicable for NT, EXT, LSM, ACU, CTRL, applique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERS…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.4
eqptShelfBoardSummaryOpermandatory
Bitmap of the operational state of the boards (0 = locked,
1 = unlocked). Applicable for NT, EXT, LSM, ACU, CTRL, applique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.5
eqptShelfBoardSummaryTypeMismatchmandatory
Bitmap of the mismatch between the actual board-type and the planned
board-type (0 = mismatch, 1 = no mismatch).
Applicable for NT, EXT, LSM, ACU, CTRL, applique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.6
eqptShelfBoardSummaryAlarmmandatory
Bitmap of the boards which generated an alarm (0 = alarm,
1 = no alarm). Applicable for NT, EXT, LSM, ACU, CTRL, applique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO …
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.637.61.1.23.4.1.7

eqptProtGroupTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.5.2 · 1 row entry · 11 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptProtGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptProtGroupTable' 
A table representing groups of protected or protecting elements.
Only one row for NT protection group which will always be created and
cannot be deleted.
From ISAM R4.1.02 the default created NT protection group will be locked.
(before it was unlocked).
From R3.3 onwards, each LT protection group (comprised of 2 adjacent
slots LT n and LT n+1, where n is a odd number), also has a row.
The protection groups are created by default even though
the protection groups are not used.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE:  DEP as described above
eqptProtGroupEntry row .1.3.6.1.4.1.637.61.1.23.5.2.1
An entry of the eqptProtGroupTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptProtGroupIdmandatory
A unique value to identify a protection group.
The value 1 is reserved for the NT protection group,
which is always present and cannot be deleted.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.5.2.1.1
eqptProtGroupTypemandatory
This attributes distinguishes between 1+1 and 1:N protection groups.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PERSIST: YES DEFVALUE: one-plus-one(1) UNITS: -
Enumerationr/w
Enumerated Values:
1one-plus-one
2one-for-N
 .1.3.6.1.4.1.637.61.1.23.5.2.1.2
eqptProtGroupNumberOfChangesmandatory
Wrap around counter which indicates the number of status changes
in this protection group as well as the status changes for the
protecting elements within this group:
eqptProtGroupSwitchoverCount;
eqptProtGroupL…
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.5.2.1.3
eqptProtGroupSwitchoverCountmandatory
Wrap around counter for the number of switchovers being performed.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: 0 UNITS: -
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.5.2.1.4
eqptProtGroupLastSwitchoverReasonmandatory
This object contains the reason of the last switch over.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..17
PERSIST: YES DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
1noSwitchOver
2forcedActive
3boardNotPresent
4extenderChainFailure
5linkFailure
6watchDogTimeOut
7fileSystemCorrupt
8configurationMismatch
9boardUnplanned
10boardLocked
11shelfDefense
12revertiveSwitchOver
13lanxFailure
14lanxHwFailure
15lanxSdkFailure
16dpoeAppFailure
17dpoeUnreachable
 .1.3.6.1.4.1.637.61.1.23.5.2.1.5
eqptProtGroupEpsQuenchfactormandatory
This object contains a timervalue in 1/100 sec. The EpsQuench timer
is used to prevent continuous switch-overs in case of unstable EPS.
Value equal to zero means the quenching mechanism is disabled.
Configuration of the…
RFC1155-SMITimeTicksr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.5.2.1.6
eqptProtGroupAlarmBitmapmandatory
Status bitmap:
bit 0 set means No defect at all
bit 1 : if bit set, Standby degradation alarm is set
(excludes bit 0 setting)
bit 2 .. 31 : reserved for future extensions.

ALCATEL NOTE:
SUPPORT: Y…
Integer32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.637.61.1.23.5.2.1.7
eqptProtGroupAdminStatusmandatory
Used by the administrator to disable or enable protection within
that protection group.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES DEFVALUE: unlock(1) UNITS: -
Enumerationr/w
Enumerated Values:
1unlock
2lock
 .1.3.6.1.4.1.637.61.1.23.5.2.1.8
eqptProtGroupAdminProtElementmandatory
Only supported for 1:N protection groups. In case of a forced
switchover to the spare element, this attribute is used to specify
the element to be protected. The value 0 means that no element is
specified.
…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.5.2.1.9
eqptProtGroupOperProtElementmandatory
Only supported for 1:N protection groups. Indicates which element
is currently protected by the spare element. The value 0 means that
currently the spare element is not protecting any element.

ALCATEL NOT…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.5.2.1.10
eqptProtGroupRowStatusmandatory
Entries in the eqptProtGroupTable can only be created at once, by
specifying eqptProtGroupRowStatus=createAndGo(4).
For NT protection group, if all values are valid then the
entry is made active(1). For LT protection gr…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.637.61.1.23.5.2.1.11

eqptProtElementTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptProtElementTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptProtElementTable' 
A table representing the protected or protecting elements.
An element can be either a board or an extension chain. Both are
identified by the corresponding slot identifier (extension chain
is identified by slot of corresponding NT board).
This table has only two rows from ISAM R2.2 to R3.2.
From R3.3 onwards, this table has a row for each slots in the
main shelf.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above
eqptProtElementEntry row .1.3.6.1.4.1.637.61.1.23.5.3.1
An entry of the eqptProtElementTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptProtElementGroupIdmandatory
This attributes identifies the protection group to which this
element belongs.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO for ISAM R3.3 RANGE: See above
PERSIST: YES DEFVALUE: NA …
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.5.3.1.1
eqptProtElementTypemandatory
This attribute is used to distinguish between normal elements of
a protection group and the spare element of a 1:N protection group.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..2
PE…
Enumerationr/w
Enumerated Values:
1normal
2spare
 .1.3.6.1.4.1.637.61.1.23.5.3.1.2
eqptProtElementStandbyStatusmandatory
This attribute reflects the standby status of the protection
group element.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
1providing-service
2hot-standby
3cold-standby
4idle
 .1.3.6.1.4.1.637.61.1.23.5.3.1.3
eqptProtElementRedcyCtrlStatusmandatory
This attribute is used to force a switchover between elements of
a protection group or to keep one of the elements active.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1..2
PERSIST: YES…
Enumerationr/w
Enumerated Values:
1normal
2forced-active
 .1.3.6.1.4.1.637.61.1.23.5.3.1.4
eqptProtElementRowStatusmandatory
Entries in the eqptProtElementTable can only be created at once,
by specifying eqptProtEelementRowStatus=createAndGo(4). If all
values are valid then the entry is made active(1). If the object
is set to destroy(6), the …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.637.61.1.23.5.3.1.5
eqptProtElementStandbyStatuschangeReasonmandatory
This attribute reflects the reason why the standby status of the protection group element has changed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0..24
PERSIST: NO DEFVALUE: none(0) UNITS: -
Enumeration
Enumerated Values:
0none
1protectionGroupLocked
2forcedActive
3peerLinkUnAvailable
4peerLocked
5peerNotPlanned
6peerNotPluggedIn
7databaseNotInSync
8lanxDynamicDataNotSynced
9lanxSdkFailure
10lanxRecovSdkFailure
11lanxHwFailure
12lanxDynDataSyncFailure
13lanxStaticSyncFailure
14lanxPeerCommFailure
15lanxFailure
16linkGroupNotAvailable
17ltNotEnabled
18lanxHiGigFailure
19lanxReconcileFailure
20lanxDiscoveryFailure
21dpoeAppFailure
22dpoeCommFailure
23dpoeSyncFailure
24dpoeUnreachable
 .1.3.6.1.4.1.637.61.1.23.5.3.1.6

eqptProfileTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.6.1 · 1 row entry · 3 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptProfileTable' 
A table holding the mapping between the profileId and the corresponding
profile name.
This table has a row for every profile in the system.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above
eqptProfileEntry row .1.3.6.1.4.1.637.61.1.23.6.1.1
An entry in the eqptProfileTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptProfileIdmandatory
A value identifying a profile.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -
ASAM-TC-MIBAsamProfileIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.6.1.1.1
eqptProfileNamemandatory
The corresponding name for a given profile id.
The name corresponding to the ProfileId must also be unique.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA …
ASAM-TC-MIBAsamProfileName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.637.61.1.23.6.1.1.2
eqptProfileDescriptionmandatory
A short description for the given profile, explaining the
key attributes.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.6.1.1.3

eqptProfileApplicabilityTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.6.2 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptProfileApplicabilityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptProfileApplicabilityTable' 
This table lists for every defined profile in the system for
which boards it is applicable.
One profile can be applicable for multiple board types.
Multiple profiles can be applicable for the same board type.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above
eqptProfileApplicabilityEntry row .1.3.6.1.4.1.637.61.1.23.6.2.1
An entry in the eqptProfileApplicabilityTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptBoardTypemandatory
A string representing the board for which the profile is applicable.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.6.2.1.1
eqptDefaultProfilemandatory
A flag indicating if this is the default profile for a specific
board type.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.637.61.1.23.6.2.1.2

eqptTestChainTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.7 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptTestChainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptTestChainTable' 
A table contains the test chain configuration indicating
which shelf is connected to the TAP_UP or whether an external
test head is connected to the TAP_UP. This table has one row
for each planned shelf.
          
ALCATEL NOTE:
   TABLESIZE: DEP as described above
eqptTestChainEntry row .1.3.6.1.4.1.637.61.1.23.7.1
An entry in the eqptTestChainTable.
Indexes
Column Syntax OID
eqptTestChainShelfToTapUpmandatory
A unique value to identify a shelf position which is connected
to the TAP_UP. The value '0' (default value) indicates that it
is not connected. This parameter is used if
eqptTestChainExtTestHeadToTapUp is set to '1' (i.…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.637.61.1.23.7.1.1
eqptTestChainExtTestHeadToTapUpmandatory
This parameter is used to indicate whether an external test
head is connected to the TAP_UP.
no (1): no external test head is connected to the TAP_UP.
yes (2): an external test head is connected to the TAP_UP.
…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.637.61.1.23.7.1.2

eqptCustAlarmProfileTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.8.2 · 1 row entry · 34 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptCustAlarmProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptCustAlarmProfileTable' 
A table representing the configurable attributes of the customizable
alarms : a description, and the corresponding Alarm Outputs to be
activated when this alarm occurs.
          
This table has a row for each external alarms profile.  It offers data
for a maximum of 5 external alarms.  Alarms that are not defined for
a particular profile, need to contain default values in the fields
corresponding to that alarm number.  Independent of the alarm number,
the name of the profile is also present, as well as the row status.
          
ALCATEL NOTE:
   SUPPORT: YES   TABLESIZE: DEP as described above
eqptCustAlarmProfileEntry row .1.3.6.1.4.1.637.61.1.23.8.2.1
An entry in the eqptCustAlarmProfileTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptCustAlarmProfileIndexmandatory
The Customizale Alarms Profile Index.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -
ASAM-TC-MIBAsamProfileIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.8.2.1.1
eqptCustAlarmProfileNamemandatory
A textual name uniquely identifying this profile.

Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YE…
ASAM-TC-MIBAsamProfileNamer/w
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.637.61.1.23.8.2.1.2
eqptCustAlarmProfileUsedStatusmandatory
Indicates the number of entities using this profile. If the
reference count is greater than 0, then this profile is 'in use',
and may NOT be deleted. If the value is 0, then this profile is
'not in use', and can be de…
ASAM-TC-MIBAsamProfileRefCount
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.637.61.1.23.8.2.1.3
eqptCustAlarmProfileRowStatusmandatory
Entries in the eqptCustAlarmProfileTable can only be created at
once, by specifying eqptCustAlarmProfileRowStatus=createAndGo(4).
If all values are valid then the entry is made active(1). If the
object is set to destroy…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.637.61.1.23.8.2.1.4
eqptCustAlarmProfileMnemonic1mandatory
The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 1.

Maximum length is 16, allowed characters A-Z.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RA…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.637.61.1.23.8.2.1.5
eqptCustAlarmProfileDescription1mandatory
The description of the customizable alarm, for given
Profile Index, for external alarm number 1.

Maximum length is 40.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PER…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.637.61.1.23.8.2.1.6
eqptCustAlarmProfileVisibleOutput1mandatory
Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 1.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.7
eqptCustAlarmProfileAudibleOutput1mandatory
Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 1.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.8
eqptCustAlarmProfilePolarity1mandatory
Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 1.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: no…
EqptCustAlarmProfilePolarityTyper/w
Type Values:
1inversed
2normal
 .1.3.6.1.4.1.637.61.1.23.8.2.1.9
eqptCustAlarmProfileSeverity1mandatory
Shows the severity of the alarm,
for given Profile Index, for external alarm number 1.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -
ASAM-ALARM-MIBAsamAlarmSeverityTyper/w
Type Values:
0alllevel
1indeterminate
2warning
3minor
4major
5critical
6ignore
 .1.3.6.1.4.1.637.61.1.23.8.2.1.10
eqptCustAlarmProfileMnemonic2mandatory
The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 2.

Maximum length is 16, allowed characters A-Z.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RA…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.637.61.1.23.8.2.1.11
eqptCustAlarmProfileDescription2mandatory
The description of the customizable alarm, for given
Profile Index, for external alarm number 2.

Maximum length is 40.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PER…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.637.61.1.23.8.2.1.12
eqptCustAlarmProfileVisibleOutput2mandatory
Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 2.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.13
eqptCustAlarmProfileAudibleOutput2mandatory
Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 2.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.14
eqptCustAlarmProfilePolarity2mandatory
Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 2.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: no…
EqptCustAlarmProfilePolarityTyper/w
Type Values:
1inversed
2normal
 .1.3.6.1.4.1.637.61.1.23.8.2.1.15
eqptCustAlarmProfileSeverity2mandatory
Shows the severity of the alarm,
for given Profile Index, for external alarm number 2.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -
ASAM-ALARM-MIBAsamAlarmSeverityTyper/w
Type Values:
0alllevel
1indeterminate
2warning
3minor
4major
5critical
6ignore
 .1.3.6.1.4.1.637.61.1.23.8.2.1.16
eqptCustAlarmProfileMnemonic3mandatory
The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 3.

Maximum length is 16, allowed characters A-Z.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RA…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.637.61.1.23.8.2.1.17
eqptCustAlarmProfileDescription3mandatory
The description of the customizable alarm, for given
Profile Index, for external alarm number 3.

Maximum length is 40.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PER…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.637.61.1.23.8.2.1.18
eqptCustAlarmProfileVisibleOutput3mandatory
Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 3.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.19
eqptCustAlarmProfileAudibleOutput3mandatory
Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 3.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.20
eqptCustAlarmProfilePolarity3mandatory
Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 3.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: no…
EqptCustAlarmProfilePolarityTyper/w
Type Values:
1inversed
2normal
 .1.3.6.1.4.1.637.61.1.23.8.2.1.21
eqptCustAlarmProfileSeverity3mandatory
Shows the severity of the alarm,
for given Profile Index, for external alarm number 3.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -
ASAM-ALARM-MIBAsamAlarmSeverityTyper/w
Type Values:
0alllevel
1indeterminate
2warning
3minor
4major
5critical
6ignore
 .1.3.6.1.4.1.637.61.1.23.8.2.1.22
eqptCustAlarmProfileMnemonic4mandatory
The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 4.

Maximum length is 16, allowed characters A-Z.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RA…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.637.61.1.23.8.2.1.23
eqptCustAlarmProfileDescription4mandatory
The description of the customizable alarm, for given
Profile Index, for external alarm number 4.

Maximum length is 40.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PER…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.637.61.1.23.8.2.1.24
eqptCustAlarmProfileVisibleOutput4mandatory
Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 4.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.25
eqptCustAlarmProfileAudibleOutput4mandatory
Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 4.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.26
eqptCustAlarmProfilePolarity4mandatory
Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 4.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: no…
EqptCustAlarmProfilePolarityTyper/w
Type Values:
1inversed
2normal
 .1.3.6.1.4.1.637.61.1.23.8.2.1.27
eqptCustAlarmProfileSeverity4mandatory
Shows the severity of the alarm,
for given Profile Index, for external alarm number 4.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -
ASAM-ALARM-MIBAsamAlarmSeverityTyper/w
Type Values:
0alllevel
1indeterminate
2warning
3minor
4major
5critical
6ignore
 .1.3.6.1.4.1.637.61.1.23.8.2.1.28
eqptCustAlarmProfileMnemonic5mandatory
The mnemonic of the customizable alarm, for given Profile Index,
for external alarm number 5.

Maximum length is 16, allowed characters A-Z.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RA…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.637.61.1.23.8.2.1.29
eqptCustAlarmProfileDescription5mandatory
The description of the customizable alarm, for given
Profile Index, for external alarm number 5.

Maximum length is 40.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PER…
OctetStringr/w
Constraints:
range: 0-40
 .1.3.6.1.4.1.637.61.1.23.8.2.1.30
eqptCustAlarmProfileVisibleOutput5mandatory
Shows whether or not to trigger the visible alarm output,
for given Profile Index, for external alarm number 5.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.31
eqptCustAlarmProfileAudibleOutput5mandatory
Shows whether or not to trigger the audible alarm output,
for given Profile Index, for external alarm number 5.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: …
EqptCustAlarmProfileOutputTyper/w
Type Values:
1triggered
2notTriggered
 .1.3.6.1.4.1.637.61.1.23.8.2.1.32
eqptCustAlarmProfilePolarity5mandatory
Shows whether the alarm polarity is normal or inversed,
for given Profile Index, for external alarm number 5.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: no…
EqptCustAlarmProfilePolarityTyper/w
Type Values:
1inversed
2normal
 .1.3.6.1.4.1.637.61.1.23.8.2.1.33
eqptCustAlarmProfileSeverity5mandatory
Shows the severity of the alarm,
for given Profile Index, for external alarm number 5.

ALCATEL NOTE:
SUPPORT: NO INSRVMOD: NA RANGE: 1-5
PERSIST: YES DEFVALUE: major(4) UNITS: -
ASAM-ALARM-MIBAsamAlarmSeverityTyper/w
Type Values:
0alllevel
1indeterminate
2warning
3minor
4major
5critical
6ignore
 .1.3.6.1.4.1.637.61.1.23.8.2.1.34

eqptCustAlarmProfileMappingTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.8.3 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptCustAlarmProfileMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptCustAlarmProfileMappingTable' 
The table listing the profile name to profile Index
Mapping.
eqptCustAlarmProfileMappingEntry row .1.3.6.1.4.1.637.61.1.23.8.3.1
An entry (conceptual row) representing the Customizable Alarm Profile
Name to Index mapping. The system automatically creates an entry in
this table for each corresponding entry (custAlarm-profile) created
in the eqptC…
Indexes
Column Syntax OID
eqptCustAlarmProfileMappingNamemandatory
A textual name uniquely identifying this profile.
This name has to be unique within the assigned scope.

Maximum length is 32, allowed characters A-Z, a-z, 0-9, '-'.

ALCATEL NOTE:
SUPPORT…
ASAM-TC-MIBAsamProfileName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.637.61.1.23.8.3.1.1
eqptCustAlarmProfileMappingIndexmandatory
The Customizale Alarms Profile Index.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..20
PERSIST: YES DEFVALUE: NA UNITS: -
ASAM-TC-MIBAsamProfileIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.8.3.1.2

eqptBoardThermalSensorTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.10 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptBoardThermalSensorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptBoardThermalSensorTable' 
A table representing the actual value and thresholds of Thermal Sensor(s) on boards.
One entry corresponds to each sensor on board.
The entries are presented only when the board is plugged in, operationally up, has thermal sensors on it, and when operator put a read request for it.
          
ALCATEL NOTE:
SUPPORT: YES  TABLESIZE: DEP as described above
eqptBoardThermalSensorEntry row .1.3.6.1.4.1.637.61.1.23.10.1
An entry of the equipment thermal sensor table on boards

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptBoardThermalSensorIdmandatory
Index of thermal sensors on board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..15
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.1
eqptBoardThermalSensorActualTemperaturemandatory
Actual Temperature value read from thermal sensor on board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: -40..150
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.2
eqptBoardThermalSensorTcaThresholdLowmandatory
Low Tca threshold of thermal sensor on Board

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.3
eqptBoardThermalSensorTcaThresholdHighmandatory
High Tca threshold of thermal sensor on Board

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.4
eqptBoardThermalSensorShutdownThresholdLowmandatory
Low Shutdown threshold of thermal sensor on Board

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.5
eqptBoardThermalSensorShutdownThresholdHighmandatory
High Shutdown threshold of thermal sensor on Board

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: degree Celsius
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.10.1.6

eqptPortMappingTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.13 · 1 row entry · 7 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPortMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPortMappingTable' 
Equipment PortMapping table, showing the mapping between logical ports
and physical ports (faceplate numbering).
          
This table contains one row per logical port on the xHUB.
          
ALCATEL NOTE:
   SUPPORT: YES  TABLESIZE: DEP as described above
eqptPortMappingEntry row .1.3.6.1.4.1.637.61.1.23.13.1
An entry of the equipment PortMapping table.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptPortMappingLogPortNbrmandatory
Index in equipment PortMapping Table: corresponds to the logical
port id on the xHUB.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
EqptPortMappingIndex .1.3.6.1.4.1.637.61.1.23.13.1.1
eqptPortMappingLogPortTypemandatory
The logical port type corresponds to the link classification.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..4
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
1uplink
2downlink
3hostlink
4internal
 .1.3.6.1.4.1.637.61.1.23.13.1.2
eqptPortMappingPhyPortSlotmandatory
The equipment slot index of the physical port.
This slot will point to either a NT or NTIO slot position.

This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFFFF
…
EqptSlotIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.13.1.3
eqptPortMappingPhyPortTypemandatory
The physcial port type.

This field is not applicable for hostlinks.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1..3,5,10,11,12,13,14
PERSIST: NO DEFVALUE: 0 UNITS: -
Enumeration
Enumerated Values:
1not-applicable
2sfp
3xfp
5vp
10eth
11mcast
12ai
13ieee
14cfp
 .1.3.6.1.4.1.637.61.1.23.13.1.4
eqptPortMappingPhyPortNbrmandatory
The pysical port number, which corresponds to the faceplate number
of the sfp/xfp port.

This field is not applicable for hostlinks or internal, in which case it gets
the value 0xFF.

ALCATEL…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.13.1.5
eqptPortMappingLSMSlotmandatory
The equipment slot index of the corresponding LSM slot.

This field is only applicable for hostlinks, and downlinks to which
a remote LSM slot is assigned. In other cases it gets the value
0xFFFF.
…
EqptSlotIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.637.61.1.23.13.1.6
eqptPortMappingChangesmandatory
This counter represents the number of PortMapping configuration changes per row. It is a wraparound counter between 0 and MAX.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-MAX
PERSIST: NO DEFVALUE: 0 …
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.637.61.1.23.13.1.7

eqptPortProtectionTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.15 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPortProtectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPortProtectionTable' 
This table holds the port protection groups
eqptPortProtectionEntry row .1.3.6.1.4.1.637.61.1.23.15.1
This entry represents a protection group which consists of two
ports. These two ports can be on the same LT board, or on
different LT's.
Indexes
Column Syntax OID
eqptPortProtectionPortIdmandatory
Each row is indexed by the IfIndex of the
primary port of the protection group, the one which
is protected.
Only PON ports can be selected.
ITF-MIBInterfaceIndex .1.3.6.1.4.1.637.61.1.23.15.1.1
eqptPortProtectionRowStatusmandatory
All rows instantiated using 'create-and-go' to
mate 2 ports in a protection group. Set to 'destroy' to
eliminate the protection group.

RULE 1 - Cannot create a protection group on an LT card
that…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.637.61.1.23.15.1.2
eqptPortProtectionPairedPortIdmandatory
This attribute represents the IfIndex of the paired
port. Only PON ports can be selected.

Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
…
ITF-MIBInterfaceIndexr/w .1.3.6.1.4.1.637.61.1.23.15.1.3
eqptPortProtectionPortStatusmandatory
This attribute represents the status of the primary port.

Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmission.…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.15.1.4
eqptPortProtectionPairedPortStatusmandatory
This attribute represents the status of the paired
port.

Following DEFINITIONS apply:
Active - means the port is used for transmission.
Inactive - means the system is NOT using the port for
transmissi…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.15.1.5
eqptPortProtectionSwitchCommandmandatory
This attribute represents the IfIndex of the desired port
to switch over to.

Must satisfy the following VALIDATIONs (otherwise OLT
should reject):
1) IfIndex must represent a real port.
2) IfIndex mus…
ITF-MIBInterfaceIndexr/w .1.3.6.1.4.1.637.61.1.23.15.1.6
eqptPortProtectionLastSwitchReasonmandatory
This attribute contains the reason for the last port
switchover (if any).

0 = No switch has occurred (since last LT startup).
1 = Manual switch due to port Admin State change.
2 = Manual switch due to …
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.15.1.7
eqptPortProtectionNumberOfSwitchoversmandatory
This attribute contains the number of switchovers since
last LT startup.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.15.1.8

eqptPortProtectionLookupTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.16 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPortProtectionLookupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPortProtectionLookupTable' 
This table holds the lookup port protection groups
eqptPortProtectionLookupEntry row .1.3.6.1.4.1.637.61.1.23.16.1
This entry represents a lookup protection group which consists
of two ports. The key is either a primary or a paired port
in the eqptPortProtectionTable.
Indexes
Column Syntax OID
eqptPortProtectionLookupPortIdmandatory
Each row is indexed by the IfIndex of a port in a
protection group, either a primary or a paired port.
Only PON ports can be selected.
ITF-MIBInterfaceIndex .1.3.6.1.4.1.637.61.1.23.16.1.1
eqptPortProtectionLookupPrimaryPortIdmandatory
This attribute represents the IfIndex of the primary
port of the protection group to which the key port
belongs.
Only PON ports can be selected.
ITF-MIBInterfaceIndex .1.3.6.1.4.1.637.61.1.23.16.1.2

eqptBoardPlannedResourceTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.17 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptBoardPlannedResourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptBoardPlannedResourceTable' 
A table representing the actual values of configured hardware
resources on boards.
This table only displays entries for resources on the boards
that support this view. These are boards for which the relation
between HW resource consumption and system configuration is not
trivial.
If the board is not supporting this view, then no entries will
be displayed. The board does not physically need to be present
for displaying the resources.
          
ALCATEL NOTE:
SUPPORT: YES  TABLESIZE: DEP as described above
eqptBoardPlannedResourceEntry row .1.3.6.1.4.1.637.61.1.23.17.1
An entry of the equipment planned resource table

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptBoardPlannedResourceIdmandatory
Index of the planned resource for a board

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.17.1.1
eqptBoardPlannedResourceCurrentValuemandatory
The actual planned value for the resource

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.17.1.2
eqptBoardPlannedResourceMaxValuemandatory
The maximum value that the board supports for this resource.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.17.1.3
eqptBoardPlannedResourceDescriptionmandatory
A string describing the planned resource for this board.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.17.1.4

eqptPowerTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.18 · 1 row entry · 25 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPowerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPowerTable' 
Equipment power table, representing the power management objects per
system, rack or shelf.
This table contains one row for the system, rack or shelf that is
subject to power management. In other cases no entry is instantiated.
          
ALCATEL NOTE:
   SUPPORT: YES  TABLESIZE: DEP as described above
eqptPowerEntry row .1.3.6.1.4.1.637.61.1.23.18.1
An entry of the equipment power table.
An entry will be instantiated for a system/rack or shelf with active
power management functionality.
At the time of writing VSRM-A shelf (SX) and NGVR (MX) with a planned
RANI-B/RP…
Indexes
Column Syntax OID
eqptPowerIdmandatory
Index in equipment Power Table.
Index gives the shelf identification.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
EqptHolderIndex
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.637.61.1.23.18.1.1
eqptPowerAdminModemandatory
The eqptPowerAdminMode shows the configured power mode.
This configured mode will be used to mask any failures detected
for non-supported modes.
Enumeration is as follows:
0 = no powermanagement mode configured
1 …
Enumerationr/w
Enumerated Values:
0no-powermgnt
1ac
2ac-and-dc-local
3dc-network
4dc-network-and-dc-local
5dc-local
 .1.3.6.1.4.1.637.61.1.23.18.1.2
eqptPowerOperModemandatory
The eqptPowerOperMode shows the power mode the NE is using at the
moment of reading.
The VSRM-A (SX) and NGVR (MX) using a power management enabled NTIO
(e.g. RANI-B or RPNI-B) will provide valid information for this
ob…
Enumeration
Enumerated Values:
0no-powermgnt
1ac
2ac-and-dc-local
3dc-network
4dc-network-and-dc-local
5dc-local
6battery-fallback
 .1.3.6.1.4.1.637.61.1.23.18.1.3
eqptPowerBatTypemandatory
This object is used to configure the battery type.
This configuration only possible for planned powermanagement devices,
in this case a planned RANI-B or RPNI-B. Only values for supported
battery types are possible (e.g…
Enumerationr/w
Enumerated Values:
0not-configured
1agm-vrla-PbCa-battery
2agm-vrla-Pure-Pb-battery
3flooded-battery
4gel-battery
 .1.3.6.1.4.1.637.61.1.23.18.1.4
eqptPowerBatStartCapacitymandatory
The capacity (Ah) of the battery at the moment of installation.
The value of the capacity is in 1/100 Ah.
Instatiated when eqptPowerBatType is configured.
The configuration of this object is mandatory together with the
…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.5
eqptPowerBatPlannedLifetimemandatory
Planned lifetime of the installed battery in 1/10 year.
The planned lifetime, together with the start capacity, is used to
calculate the actual maximal capacity of the battery.
Instatiated when eqptPowerBatType is confi…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.6
eqptPowerBatStatemandatory
The battery state will provide a view on the state of the battery.
Possible states are: charging, charged and discharging.
This operational state has meaning for devices that have a configured
eqptPowerBatType. Other de…
Enumeration
Enumerated Values:
0not-configured
1no-data
2charging
3charged
4discharging
 .1.3.6.1.4.1.637.61.1.23.18.1.7
eqptPowerBatFailuremandatory
The battery failure state will provide an view on the failure state of
the battery.
This failure state has meaning for devices that have a configured
eqptPowerBatType and eqptPowerBatState different from default or
no-d…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2voltage-out-of-range
3over-voltage
4over-temperature
5battery-depleted
 .1.3.6.1.4.1.637.61.1.23.18.1.8
eqptPowerBatTemperaturemandatory
Measured temperature of the battery in 1/10 Celcius
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.

ALCATEL NOTE:
SUPPORT: YES…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.9
eqptPowerBatActualCapacitymandatory
The capacity (in % of a fully charged battery) of the battery.
The value is only readable when the battery type (eqptPowerBatType)
is configured and the battery is installed and reachable.
Default value of 0% is returne…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.10
eqptPowerBatDefenseModemandatory
The battery defense modes offers the operator the possibility to
select the preferred power defense mode in case the system falls
back to the battery mode. The power defense mode is a way to
optimize the power consumpti…
Enumerationr/w
Enumerated Values:
0no-defense
1voice-priority
 .1.3.6.1.4.1.637.61.1.23.18.1.11
eqptPowerBatDefenseThresholdmandatory
The threshold gives an indication of the remaining capacity of the
battery at the moment the defense defined in eqptPowerBatDefenseMode
should be started. The value is in %. In the default case the configured
defense mo…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.12
eqptPowerACStatemandatory
The AC power state will provide an view on the state of the AC Power
supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and AC input available.
Enumeration is as follows…
Enumeration
Enumerated Values:
0no-powermgnt
1active
2active-failure
3failure
 .1.3.6.1.4.1.637.61.1.23.18.1.13
eqptPowerACFailuremandatory
The AC failure state will provide an view on the failure state of
the AC power supply.
This failure state has meaning when eqptPowerACstate different from
default. In other cases not-applicable (0) is returned.
Specific…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2voltage-out-of-range
 .1.3.6.1.4.1.637.61.1.23.18.1.14
eqptPowerNDCaStatemandatory
The NDCa (Network DC a) state will provide an view on the state of
the Network DC Power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC a input available.
Enu…
Enumeration
Enumerated Values:
0no-powermgnt
1active
2active-failure
3failure
 .1.3.6.1.4.1.637.61.1.23.18.1.15
eqptPowerNDCaFailuremandatory
The NDCa failure state will provide an view on the failure state of
the Network DC a power supply.
This failure state has meaning when eqptPowerNDCaState different from
default. In other cases not-applicable (0) is retu…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2low-voltage
3under-voltage
 .1.3.6.1.4.1.637.61.1.23.18.1.16
eqptPowerNDCbStatemandatory
The NDCb (Network DC a) state will provide an view on the state of
the Network DC b power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and NDC b input available.
E…
Enumeration
Enumerated Values:
0no-powermgnt
1active
2active-failure
3failure
 .1.3.6.1.4.1.637.61.1.23.18.1.17
eqptPowerNDCbFailuremandatory
The NDCb failure state will provide an view on the failure state of
the Network DC b power supply.
This failure state has meaning when eqptPowerNDCbState different from
default. In other cases not-applicable (0) is retu…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2low-voltage
3under-voltage
 .1.3.6.1.4.1.637.61.1.23.18.1.18
eqptPowerLDCaStatemandatory
The LDCa power state will provide an view on the state of the local
DC a power supply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC a input available.
Enumeration …
Enumeration
Enumerated Values:
0no-powermgnt
1active
2active-failure
3failure
 .1.3.6.1.4.1.637.61.1.23.18.1.19
eqptPowerLDCaFailuremandatory
The LDCa failure state will provide an view on the failure state of
the local DC a power supply.
This failure state has meaning when eqptPowerLDCaState different from
default. In other cases not-applicable (0) is return…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2voltage-out-of-range
 .1.3.6.1.4.1.637.61.1.23.18.1.20
eqptPowerLDCbStatemandatory
The LDCb power state will provide an view on the state of the local
DC b power suply.
The value is different from no-powermgnt (0) for devices with power
management functionality and LDC b input available.
Enumeration i…
Enumeration
Enumerated Values:
0no-powermgnt
1active
2active-failure
3failure
 .1.3.6.1.4.1.637.61.1.23.18.1.21
eqptPowerLDCbFailuremandatory
The LDCb failure state will provide an view on the failure state of
the local DC b power supply.
This failure state has meaning when eqptPowerLDCbState different from
default. In other cases not-applicable (0) is return…
Enumeration
Enumerated Values:
0not-applicable
1voltage-good
2voltage-out-of-range
 .1.3.6.1.4.1.637.61.1.23.18.1.22
eqptPowerInVoltagemandatory
Measured incoming voltage in 1/10 Volt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 2650
PE…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.23
eqptPowerInCurrentmandatory
Measured incoming current in 1/10 Ampere
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .. 60
PE…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.24
eqptPowerInConsumedPowermandatory
Calculated incoming consumed power in 1/10 Watt
Only supported for devices that host an extended power management
function (e.g RANI-B and RPNI-B).

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0 .…
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.18.1.25

eqptPowerSupplyTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.19 · 1 row entry · 17 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPowerSupplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPowerSupplyTable' 
Equipment power table, representing the power suplly management objects
This table contains one row per power supply supported on the system.
In other cases no entry is instantiated.
          
ALCATEL NOTE:
   SUPPORT: YES  TABLESIZE: DEP as described above
eqptPowerSupplyEntry row .1.3.6.1.4.1.637.61.1.23.19.1
An entry of the equipment power table.
An entry will be instantiated per power supply supported on the system.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptPowerSupplyIdmandatory
Index in equipment Power Supply Table.
This is a number representing the Nth power supply present in the system.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA …
EqptPowerSupplyIndex
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.637.61.1.23.19.1.1
eqptPowerSupplyPartNumbermandatory
Report the part number of the installed power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
OctetString
Constraints:
range: 13-13
 .1.3.6.1.4.1.637.61.1.23.19.1.2
eqptPowerSupplyCleiCodemandatory
Report the CLEI code of the installed power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
OctetString
Constraints:
range: 11-11
 .1.3.6.1.4.1.637.61.1.23.19.1.3
eqptPowerSupplySerNumbermandatory
Report the serial number of the installed power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
OctetString
Constraints:
range: 19-19
 .1.3.6.1.4.1.637.61.1.23.19.1.4
eqptPowerSupplyVinmandatory
Report the incoming voltage arriving at the power supply in millivolt

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.19.1.5
eqptPowerSupplyIinmandatory
Report the incoming current arriving at the power supply in milliampere

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.19.1.6
eqptPowerSupplyVoutmandatory
Report the output voltage provided by the power supply in millivolt

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.19.1.7
eqptPowerSupplyIoutmandatory
Report the output current provided by the power supply in milliampere

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.19.1.8
eqptPowerSupplyTemperaturemandatory
Report the temperature of the power supply in millidegree

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.19.1.9
eqptPowerSupplyFaultVinmandatory
Report the fault or warning occurring for the input voltage

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1input-overvoltage-fault
2input-overvoltage-warning
3input-undervoltage-warning
4input-undervoltage-fault
5input-ac-nok-fault
6input-ac-nok-warning
7unit-off-for-insufficient-input-voltage
 .1.3.6.1.4.1.637.61.1.23.19.1.10
eqptPowerSupplyFaultVoutmandatory
Report the fault or warning occurring for the output voltage

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1output-overvoltage-fault
2output-overvoltage-warning
3output-undervoltage-warning
4output-undervoltage-fault
 .1.3.6.1.4.1.637.61.1.23.19.1.11
eqptPowerSupplyFaultIinmandatory
Report the fault or warning occurring for the input current

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1input-overcurrent-fault
2input-overcurrent-warning
3input-overpower-warning
 .1.3.6.1.4.1.637.61.1.23.19.1.12
eqptPowerSupplyFaultIoutmandatory
Report the fault or warning occurring for the output current

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1output-overcurrent-fault
2output-overcurrent-warning
3output-undercurrent-warning
4output-undercurrent-fault
 .1.3.6.1.4.1.637.61.1.23.19.1.13
eqptPowerSupplyFaultTemperaturemandatory
Report the fault or warning occurring for the tempertaure

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1overtemperature-fault
2overtemperature-warning
3undertemperature-warning
4undertemperature-fault
 .1.3.6.1.4.1.637.61.1.23.19.1.14
eqptPowerSupplyFaultCmlmandatory
Report the fault or warning occurring for the tempertaure

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0no-error
1invalid-or-unsupported-command-received
2invalid-or-unsupported-data-received
3packet-error-check-failed
4memory-fault-detected
5processor-fault-detected
6other-communication-fault
7other-memory-or-logic-fault
 .1.3.6.1.4.1.637.61.1.23.19.1.15
eqptPowerSupplyPresentmandatory
Report if the power supply is present.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Enumeration
Enumerated Values:
0yes
1no
 .1.3.6.1.4.1.637.61.1.23.19.1.16
eqptPowerSupplyFaultDetectedmandatory
Report if a fault has been detected. If yes, then
eqptPowerSupplyFaultVin, eqptPowerSupplyFaultVout,
eqptPowerSupplyFaultIin, eqptPowerSupplyFaultIOut,
eqptPowerSupplyFaultTemperature or eqptPowerSupplyFaultCml
is repor…
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.637.61.1.23.19.1.17

eqptPowerRftcTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.20.1 · 1 row entry · 11 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPowerRftcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPowerRftcTable' 
Equipment RFT-C power table, representing the RFT-C management objects
This table contains one row per RFT-C module supported on the system.
In other cases no entry is instantiated.
          
ALCATEL NOTE:
   SUPPORT: YES  TABLESIZE: DEP as described above
eqptPowerRftcEntry row .1.3.6.1.4.1.637.61.1.23.20.1.1
An entry of the equipment RFT-C power table.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptPowerRftcIdmandatory
Index in equipment Power RFT-C Table.
This is a number represents the shelf containting the RFT-C module.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
EqptHolderIndex
Type Constraints:
range: 1..255
 .1.3.6.1.4.1.637.61.1.23.20.1.1.1
eqptPowerRftcVCommonoptional
Report the common voltage arriving at the power supply in millivolt

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mV
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.2
eqptPowerRftcICommonoptional
Report the common current arriving at the power supply in milliampere

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: mA
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.3
eqptPowerRftcTHotspotoptional
Report the temperature of the power supplys hotspot in degrees celcius

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °C
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.4
eqptPowerRftcTAmbientoptional
Report the ambient temperature of the power supply in degrees celcius

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: °C
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.5
eqptPowerRftcSWVersionoptional
Report the software version of the RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.20.1.1.6
eqptPowerRftcHWVersionoptional
Report the hardware version of the RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.20.1.1.7
eqptPowerRftcHWRevisionoptional
Report hardware revision of the RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.8
eqptPowerRftcSerialnumberoptional
Report serial number of the RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.20.1.1.9
eqptPowerRftcManufactureroptional
Report the manufacturer code of the RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.637.61.1.23.20.1.1.10
eqptPowerRftcLineCountoptional
Report the number of lines used on this RFT-C power supply

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.1.1.11

eqptPowerRftcLineTable

table mandatory
.1.3.6.1.4.1.637.61.1.23.20.2 · 1 row entry · 2 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk eqptPowerRftcLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptPowerRftcLineTable' 
ALCATEL NOTE:
SUPPORT: YES   TABLESIZE: DEP as described above
eqptPowerRftcLineEntry row .1.3.6.1.4.1.637.61.1.23.20.2.1
An entry in the eqptPowerRftcLineTable.

ALCATEL NOTE:
SUPPORT: YES
Indexes
Column Syntax OID
eqptPowerRftcLineIdmandatory
Report the line number

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.637.61.1.23.20.2.1.1
eqptPowerRftcLineStatusmandatory
Report the line status.

ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -
EqptPowerRftcLineStatus
Type Values:
0ok
1notconnected
2highimpedant
3earthfault
 .1.3.6.1.4.1.637.61.1.23.20.2.1.2