eqptSlotPlannedType

ASAM-EQUIP-MIB · .1.3.6.1.4.1.637.61.1.23.3.1.2
Commands MIB view Table view

Object

column mandatory r/w SNMPv2-TCDisplayString 
A string representing the board (NT, EXT, LSM, ACU, CTRL, Applique) that
is planned in the slot.  If the board is planned, the string consists
of a mnemonic that identifies the board-type.
              
Following mnemonics are valid:
              
<BOARD_MNEMONIC> A board of a specific type.  Refer to the ETSI and
                 US Configurations documents for the list of boards
                 that are supported in a given release.
                 ODM board types are planned with the board mnemonic,
                 they are treated as unmanaged boards.
              
EXT_MANAGED      The presence of the LT module can be detected but
                 it is not managed by this NT in the HYNT module.
                 The LT type must be planned on the other NT.
              
UNMANAGED        Unmanaged board: this means that the presence of
                 the board can be detected and that the board can
                 be reset and powered-down but that it is not
                 possible to establish communication with the board
                 in software.
              
NOT_PLANNED      No board is planned in the slot.
              
NOT_ALLOWED      Slot planning is not allowed in this position.
              
ALCATEL NOTE:
   SUPPORT: YES   INSRVMOD: YES             RANGE: See above
   PERSIST: YES   DEFVALUE: 'NOT_PLANNED'   UNITS: -

Context

MIB
ASAM-EQUIP-MIB
OID
.1.3.6.1.4.1.637.61.1.23.3.1.2
Type
column
Access
readwrite
Status
mandatory
Parent
eqptBoardEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptSlotPlannedType'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ASAM-EQUIP-MIB::eqptSlotPlannedType.<eqptSlotId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'ASAM-EQUIP-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ASAM-EQUIP-MIB::eqptSlotPlannedType'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255