ARRIS-MTA-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
69

arrisMtaDevCallStatsTable

table
.1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46 · 1 row entry · 11 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevCallStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevCallStatsTable' 
This table reports various end of call statistics.
arrisMtaDevCallStatsEntry row .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1
Each end point entry represents one telephone line
Indexes
Column Syntax OID
arrisMtaDevCallStatsIndex
The unique value which identifies the endpoint.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.1
arrisMtaDevCallStatsRtpTxPkts
This MIB object reports the total number of RTP packets sent from
the MTA during the most recent call. This MIB object is included
in a table of MIB objects which indexed by the endpoint (line number).
Its value re…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.2
arrisMtaDevCallStatsRtpRxPkts
This MIB object reports the total number of RTP packets received by
the MTA during the most recent call. This MIB object is included
in a table of MIB objects which indexed by the endpoint (line number).
Its value …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.3
arrisMtaDevCallStatsRtpPercentPktsLost
This MIB object reports the percentage of RTP packets lost during the most
recent call. This MIB object is included in a table of MIB objects which
indexed by the endpoint (line number). Its value represents the tot…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.4
arrisMtaDevCallStatsAvgJitter
This MIB object reports the average jitter measurement during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). Its value represents the average…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.5
arrisMtaDevCallStatsMaxJitter
This MIB object reports the maximum jitter measurement during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). Its value represents the maximum…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.6
arrisMtaDevCallStatsAvgLatency
This MIB object reports the average latency observed during the most recent call.
This MIB object is included in a table of MIB objects which indexed by the endpoint
(line number). This value is measured in units of…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.7
arrisMtaDevCallStatsHookStatus
This MIB object reports the hook status for each endpoint.
Note: The disconnected state is not a valid return value for this MIB object.
Enumeration
Enumerated Values:
0onHook
1offHook
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.9
arrisMtaDevCallStatsSLICStatus
This MIB object reports the over temperature condition of the SLIC chips.
Enumeration
Enumerated Values:
0normal
1overtemp
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.10
arrisMtaDevCallStatsEndPntOpStatus
This MIB object reports the current operational status for each endpoint.
This MIB object obtains its value from the MIB object ifAdminOperStatus.
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.11
arrisMtaDevCallStatsLineSubState
This MIB object reports the current sub state for each line.
This MIB object obtains its value from the lineRec.
Bits
Enumerated Values:
0normal
1diagsPending
2diagsFailed
3lcProtection
4dspFail
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.2.46.1.12

arrisMtaDevLineParameterTable

table
.1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3 · 1 row entry · 4 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevLineParameterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevLineParameterTable' 
This table reports various line parameters on the eMTA.
arrisMtaDevLineParameterEntry row .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1
Each end point entry represents one telephone line
Indexes
Column Syntax OID
arrisMtaDevInterfaceIndex
This MIB object shows the corresponding ifTable ifindex object for a particular line.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.1
arrisMtaDevPktcDevEvEndpointName
This MIB object provides the endpoint name in the following format: 'AALN/X:FQDN/IP Address'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.2
arrisMtaDevActiveConnections
This MIB object shows the number of connections for a particular line whose mode is receive only, send only, send/receive, but not inactive.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.3
arrisMtaDevLineMWIActive
This MIB object shows the MWI is active or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.3.1.4

arrisMtaDevUpSvcFlowParameterTable

table
.1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevUpSvcFlowParameterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevUpSvcFlowParameterTable' 
This table reports various Upstream Service Flow parameters on the eMTA.
arrisMtaDevUpSvcFlowParameterEntry row .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1
Each end point entry represents one upstream service flow index
Indexes
Column Syntax OID
arrisMtaDevDocsQosParamUpSvcFlowSFID
This MIB object shows the corresponding upstream service flow SFID for a valid service flow index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1.1
arrisMtaDevDocsQosParamUpSvcFlowSchedulingType
This MIB object shows the corresponding upstream service flow scheduling type for a valid service flow index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.3.4.1.2

arrisMtaDevVqmCallNumberTable

table
.1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevVqmCallNumberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevVqmCallNumberTable' 
Voice Quality Metric history on a per call number basis.  This table
provides call number history identifiers that can be entered into
arrisMtaDevVqmIdent to provide statistics for a particular call number.
arrisMtaDevVqmCallNumberEntry row .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1
Voice Quality Metric history on a per call number basis.
Indexes
Column Syntax OID
arrisMtaDevVqmCallNumberIndex
A unique value which identifies the call number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1.1
arrisMtaDevVqmCallNumberIds
This displays a history of Call number identifiers for the specified line.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.4.1.2

arrisMtaDevVqmMetricTable

table
.1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6 · 1 row entry · 3 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevVqmMetricTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevVqmMetricTable' 
Voice Quality Metrics pertaining to a particular call number.
arrisMtaDevVqmMetricEntry row .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1
Voice Quality Metrics pertaining to a particular call number.
Indexes
Column Syntax OID
arrisMtaDevVqmMetricIndex
A unique value which identifies the metric.
Enumeration
Enumerated Values:
1callEndTime
2callStartTime
3callDuration
4lineNumber
5remIpAddress
6cwErrors
7cwErrorRate
8dsSNR
9microReflections
10dsPwr
11usPwr
12eqiAverage
13eqiMin
14eqiMax
15eqiInstantaneous
16mOS-LQ
17mOS-CQ
18rERL
19signalLevel
20noiseLevel
21lossRate
22plConcealment
23discardRate
24burstDensity
25gapDensity
26burstDuration
27gapDuration
28rTDelay
29endSystemDelay
30minGapSize
31rFactor
32extRFactor
33jbAdaptive
34jbRate
35jBNomDelay
36jBMaxDelay
37jBAbsMaxDelay
38mOS-LQRem
39mOS-CQRem
40rERLRem
41signalLevelRem
42noiseLevelRem
43lossRateRem
44plConcealmentRem
45discardRateRem
46burstDensityRem
47gapDensityRem
48burstDurationRem
49gapDurationRem
50rTDelayRem
51endSystemDelayRem
52minGapSizeRem
53rFactorRem
54extRFactorRem
55jbAdaptiveRem
56jbRateRem
57jBNomDelayRem
58jBMaxDelayRem
59jBAbsMaxDelayRem
60txPackets
61txOctets
62rxPackets
63rxOctets
64packetLoss
65intervalJitter
66originator
67intervalJitterRem
68txcodec
69rxcodec
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.1
arrisMtaDevVqmMetricValues
This displays metrics for the specified call number.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.2
arrisMtaDevVqmThresholds
Sets/displays metric thresholds.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.1.1.4.6.1.3

arrisMtaDevDiagLoopTable

table
.1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1 · 1 row entry · 9 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevDiagLoopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevDiagLoopTable' 
Arris Touchstone specific per line loop diagnostic details
arrisMtaDevDiagLoopEntry row .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1
Each end point entry represents one telephone line
Indexes
Column Syntax OID
arrisMtaDevDiagLoopIndex
The unique value which identifies the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.1
arrisMtaDevDiagLoopTime
Reports the time & date when loop diagnostics
were last run on the selected line. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.2
arrisMtaDevDiagLoopRequest
Setting this value to true will send a
diagnostics request on the line. Reading this
value will always return false. The
maintenance state of the line indicates
if diagnostics are being run on the line.
Note: Currentl…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.3
arrisMtaDevDiagLoopLastResult
Start loop diag testing with arrisMtaDevDiagLoopRequest.
Thereafter reading this MIB provides current status. When testing
is complete, the status will be either all-loop-diags-passed
or the first test failed will be i…
Enumeration
Enumerated Values:
1diagnostics-passed
2hazardous-potential-test-failure
3foreign-emf-test-failure
4resistive-faults-test-failure
5receiver-offhook-test-failure
6ringer-test-failure
7invalid-state-to-init-diags
8line-is-unprovisioned
9diagnostics-results-pending
10not-started
11unsupported
12ringer-test-warning
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.4
arrisMtaDevDiagLoopHazardousPotentialTest
Displays the hazardous-potential-test result for the last
time that loop diags were run. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.5
arrisMtaDevDiagLoopForeignEmfTest
Displays the foreign-emf-test result for the last
time that loop diags were run. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.6
arrisMtaDevDiagLoopResistiveFaultsTest
Displays the resistive-faults-test result for the last
time that loop diags were run. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.7
arrisMtaDevDiagLoopReceiverOffHookTest
Displays the receiver-offhook-test result for the last
time that loop diags were run. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.8
arrisMtaDevDiagLoopRingerTest
Displays the ringer-test result for the last
time that loop diags were run. (Patent Pending)
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.15.1.1.9

arrisMtaDevCmIpTable

table
.1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1 · 1 row entry · 4 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevCmIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevCmIpTable' 
The ARRIS proprietary IP Address table used for getting
CM IP address and physical address from MTA.
arrisMtaDevCmIpEntry row .1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1
Each entry contains one IP address and one physical address.
Indexes
Column Syntax OID
arrisMtaDevCmIpIndex
Index used to order the arrisMtaDevCmIpTable entries.
Currently, CM only supports single IP address, thus
there would be no more than 1 entry in arrisMtaDevCmIpTable
Integer32
Constraints:
range: 0-0
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.1
arrisMtaDevCmIpAddressType
The type of arrisMtaDevCmIpAddress.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.2
arrisMtaDevCmIpAddress
The CM IP address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.3
arrisMtaDevCmIpPhysAddress
The CM physical address.
OctetString
Constraints:
range: 0-65535
 .1.3.6.1.4.1.4115.1.3.3.1.2.3.48.1.1.4

arrisMtaDevEndPntTable

table
.1.3.6.1.4.1.4115.1.3.3.1.2.4.3 · 1 row entry · 15 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevEndPntTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevEndPntTable' 
Arris Touchstone specific per line provisioning details
arrisMtaDevEndPntEntry row .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1
Each end point entry represents one telephone line
Indexes
Column Syntax OID
arrisMtaDevEndPntIndex
The unique value which identifies the port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.1
arrisMtaDevEndPntDialingMethod
Indicates the method used to dial the digits for this telephony
endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2),
dial-pulse signaling is used to dial the digits, Tone dialing(DTMF) is
disabled. If Tone &…
Enumerationr/w
Enumerated Values:
1tone
2pulse
3toneAndPulse
4pulseWithDTMFRelay
5toneAndPulseWithDTMFRelay
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.24
arrisMtaDevEndPntRingingWaveform
Indicates the voltage waveform used when ringing this telephony
endpoint. If normal(1) is used the standard waveform will be applied.
If sinusoidal(2) is specified, extra waveshaping will be performed. This
is for use…
Enumerationr/w
Enumerated Values:
1normal
2sinusoidal
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.25
arrisMtaDevEndPntFaxOnlyLineTimeout
This object is used to define a line as a fax only line for NCS. The default value of the
object is zero which means no timeout. When the object is set to a non-zero value
a timer is started after the RTP mode becomes…
Integer32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.26
arrisMtaDevPersistentLineStatus
Set persistent line status. This MIB and the ifAdminStatus MIB impact the
line status. If ignore(0) is set, the line status will be based on the
setting of ifAdminStatus in the MTA Config File. If ifAdminStatus is
no…
Enumerationr/w
Enumerated Values:
0ignore
1forceDisable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.27
arrisMtaDevEndPntCallWaitingRepeatSteady
When enabled(1), it indicates that the call waiting tone should repeat forever.
If disabled(0), it concludes using the finite rules.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.28
arrisMtaDevEndPntCIDEnable
Used to enable/disable the All the Caller ID field send to phone.
If it's diabled, no Caller ID information will be sent.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.29
arrisMtaDevEndPntCIDNameEnable
Used to enable/disable the Name part of CallerID field send to phone.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.30
arrisMtaDevEndPntCIDDateTimeEnable
Used to enable/disable the Date/Time part of CallerID field send to phone.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.31
arrisMtaDevEndPntLoopReversal
This mib is used to manage loop polarity/reversal. When enabled(1), it indicates that
the line should be reversed to normal once the originating party hangs up first.
If disabled(0), the loop keeps on being reversed wh…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.32
arrisMtaDevEndPntGainControlTxVoice
The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlTxVoice MIB. A value of 2 increases
the voice …
Enumerationr/w
Enumerated Values:
-128disabled
-16dBm-16
-15dBm-15
-14dBm-14
-13dBm-13
-12dBm-12
-11dBm-11
-10dBm-10
-9dBm-9
-8dBm-8
-7dBm-7
-6dBm-6
-5dBm-5
-4dBm-4
-3dBm-3
-2dBm-2
-1dBm-1
0dBm0
1dBm1
2dBm2
3dBm3
4dBm4
5dBm5
6dBm6
7dBm7
8dBm8
9dBm9
10dBm10
11dBm11
12dBm12
13dBm13
14dBm14
15dBm15
16dBm16
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.33
arrisMtaDevEndPntGainControlRxVoice
The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlRxVoice MIB. A value of 2 increases
the voice …
Enumerationr/w
Enumerated Values:
-128disabled
-16dBm-16
-15dBm-15
-14dBm-14
-13dBm-13
-12dBm-12
-11dBm-11
-10dBm-10
-9dBm-9
-8dBm-8
-7dBm-7
-6dBm-6
-5dBm-5
-4dBm-4
-3dBm-3
-2dBm-2
-1dBm-1
0dBm0
1dBm1
2dBm2
3dBm3
4dBm4
5dBm5
6dBm6
7dBm7
8dBm8
9dBm9
10dBm10
11dBm11
12dBm12
13dBm13
14dBm14
15dBm15
16dBm16
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.34
arrisMtaDevEndPntHDAudioEnable
The setting of this MIB sets an individual line to support HD Audio codecs such as G722.
The MTA MIB setting for arrisMtaDevHDAudioEnable can override the individual line setting.
This MIB is persistent when modified p…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.35
arrisMtaDevEndPntHDAudioStatus
Use this MIB to read the effective status of HD Audio for an endpoint.
Enumeration
Enumerated Values:
0disabled
1enabled
2notprovisioned
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.36
arrisMtaDevEndPntCallPState
Use this MIB to read the status of callp state
Enumeration
Enumerated Values:
0none
1out-of-service
2redialing
3idle
4predial
5dialing
6calling
7ringing
8connected
9waithook
10connected-alerting
11call-waiting
12three-way-calling
13conference
14predial-holding
15dialing-holding
16calling-holding
17waithook-holding
18waithook-alerting
19flash-digit
20stranded-call
21conf-before-answer
22autocall-ringing
23emergency-inject
24wait-reg
25restart
26disconnected
27inservice
 .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.37

arrisMtaDevBatteryStatusTable

table
.1.3.6.1.4.1.4115.1.3.3.1.3.5.3 · 1 row entry · 6 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevBatteryStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevBatteryStatusTable' 
The Power Supply Telemetry table ...There will be one row in this
table for each battery pack in the device
arrisMtaDevBatteryStatusEntry row .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1
Status information for a single battery pack. An entry in this
table exists for each battery pack contained in the device.
Indexes
Column Syntax OID
arrisMtaDevBatteryStatusIndex
An index value that uniquely identifies each battery pack
in the MTA device. The table index ....
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.1
arrisMtaDevBatteryOperState
Indicates the current operational state of the battery.
Enumeration
Enumerated Values:
0unavailable
1invalid
2shutdownWarning
3batteryReversedShorted
4batteryLow-replaceBattery-acFail
5batteryLow-replaceBattery
6batteryLow-acFail
7batteryLow
8batteryMissing
9acFail-replaceBattery
10replaceBattery
11acFail
12normal
13testInProgress
14chargerFailure
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.2
arrisMtaDevBatteryLastStateChange
The value of sysUpTime at the time the battery entered its
current operational state. If the current state was entered
prior to the last re-initialization of the local network management
subsystem, then this object …
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.3
arrisMtaDevBatteryOperSubState
Indicates the current sub-state of the battery. This info
is not designed to match the arrisMtaDevBatteryOperState but to
provide additional information as to the UPS Status.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.4
arrisMtaDevBatteryOrderingCode
The Arris ordering code for the battery(s) currently installed.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.5
arrisMtaDevBatteryEprom
Battery EPROM information for the battery(s) currently installed.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.3.3.1.3.5.3.1.6

arrisMtaDevLineCardTable

table
.1.3.6.1.4.1.4115.1.3.3.1.4.1 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDevLineCardTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDevLineCardTable' 
This table contains the state of each line card.
arrisMtaDevLineCardEntry row .1.3.6.1.4.1.4115.1.3.3.1.4.1.1
An entry in the line card table.
Indexes
Column Syntax OID
arrisMtaDevLineCardLineNumber
The unique value which identifies the line card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.4.1.1.1
arrisMtaDevLineCardState
The line card state of the line.
Enumeration
Enumerated Values:
1idle
2addressing
3talking
5frwd-disc
6ringing
7onhook-tx
14plo
 .1.3.6.1.4.1.4115.1.3.3.1.4.1.1.2

arrisMtaDispSignalTable

table
.1.3.6.1.4.1.4115.1.3.3.1.5.1 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtaDispSignalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtaDispSignalTable' 
This table contains the NCS/SIP log
arrisMtaDispSignalEntry row .1.3.6.1.4.1.4115.1.3.3.1.5.1.1
An entry in the log table.
Indexes
Column Syntax OID
arrisMtaDevDispSignalLogindex
The index of signal log.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.4115.1.3.3.1.5.1.1.1
arrisMtaDevDispSignalLog
Show the log of signal
OctetString
Constraints:
range: 0-2048
 .1.3.6.1.4.1.4115.1.3.3.1.5.1.1.2

arrisMtadocsQosServiceTable

table
.1.3.6.1.4.1.4115.1.3.3.1.6.1 · 1 row entry · 7 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtadocsQosServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtadocsQosServiceTable' 
This table contains the NCS/SIP log
arrisMtadocsQosServiceEntry row .1.3.6.1.4.1.4115.1.3.3.1.6.1.1
An entry in the Mta Qos log table.
Indexes
Column Syntax OID
arrisMtadocsQosServiceIndex
The index of mta qos entry.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.1
arrisMtadocsQosServiceFlowID
mta qos service flow id.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.2
arrisMtadocsQosServiceClassName
mta qos service class name.
OctetString .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.3
arrisMtdocsQosServiceFlowDirection
mta qos service flow direction.
OctetString .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.4
arrisMtdocsQosServicePrimaryFlow
mta qos service primary flow
OctetString .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.5
arrisMtadocsQosTrafficType
mta qos traffic type.
OctetString .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.6
arrisMtadocsQosServicePackets
Packets belong to the service.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4115.1.3.3.1.6.1.1.7

arrisMtadocsQosShowDsxLogTable

table
.1.3.6.1.4.1.4115.1.3.3.1.6.4 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk arrisMtadocsQosShowDsxLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ARRIS-MTA-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ARRIS-MTA-DEVICE-MIB::arrisMtadocsQosShowDsxLogTable' 
This table contains the DSX log
arrisMtadocsQosShowDsxLogEntry row .1.3.6.1.4.1.4115.1.3.3.1.6.4.1
An entry in the log table.
Indexes
Column Syntax OID
arrisMtadocsQosShowDsxLogIndex
The index of signal log.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.4115.1.3.3.1.6.4.1.1
arrisMtadocsQosShowDsxLog
Show the log of dsx
OctetString
Constraints:
range: 0-2048
 .1.3.6.1.4.1.4115.1.3.3.1.6.4.1.2