arrisMtaDevEndPntFaxOnlyLineTimeout
ARRIS-MTA-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.26
Object
column
r/w
Integer32
This object is used to define a line as a fax only line for NCS. The default value of the object is zero which means no timeout. When the object is set to a non-zero value a timer is started after the RTP mode becomes sendReceive. If this timer pops without having received fax/modem tones on the connection the call will be dropped. Its units are in seconds.
Context
- MIB
- ARRIS-MTA-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- arrisMtaDevEndPntEntry
- Table
- arrisMtaDevEndPntTable
- Siblings
- 14
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisMtaDevEndPntIndex The unique value which identifies the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.1 |
| arrisMtaDevEndPntDialingMethod Indicates the method used to dial the digits for this telephony
endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2),
dial-pulse signaling is used to dial the digits, T… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.24 |
| arrisMtaDevEndPntRingingWaveform Indicates the voltage waveform used when ringing this telephony
endpoint. If normal(1) is used the standard waveform will be applied.
If sinusoidal(2) is specified, extra wavesha… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.25 |
| arrisMtaDevPersistentLineStatus Set persistent line status. This MIB and the ifAdminStatus MIB impact the
line status. If ignore(0) is set, the line status will be based on the
setting of ifAdminStatus in the M… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.27 |
| arrisMtaDevEndPntCallWaitingRepeatSteady When enabled(1), it indicates that the call waiting tone should repeat forever.
If disabled(0), it concludes using the finite rules. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.28 |
| arrisMtaDevEndPntCIDEnable Used to enable/disable the All the Caller ID field send to phone.
If it's diabled, no Caller ID information will be sent. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.29 |
| arrisMtaDevEndPntCIDNameEnable Used to enable/disable the Name part of CallerID field send to phone. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.30 |
| arrisMtaDevEndPntCIDDateTimeEnable Used to enable/disable the Date/Time part of CallerID field send to phone. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.31 |
| arrisMtaDevEndPntLoopReversal This mib is used to manage loop polarity/reversal. When enabled(1), it indicates that
the line should be reversed to normal once the originating party hangs up first.
If disabled… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.32 |
| arrisMtaDevEndPntGainControlTxVoice The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlTxVoice… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.33 |
| arrisMtaDevEndPntGainControlRxVoice The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlRxVoice… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.34 |
| arrisMtaDevEndPntHDAudioEnable The setting of this MIB sets an individual line to support HD Audio codecs such as G722.
The MTA MIB setting for arrisMtaDevHDAudioEnable can override the individual line setting… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.35 |
| arrisMtaDevEndPntHDAudioStatus Use this MIB to read the effective status of HD Audio for an endpoint. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.36 |
| arrisMtaDevEndPntCallPState Use this MIB to read the status of callp state | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.37 |