arrisMtaDevEndPntGainControlTxVoice
ARRIS-MTA-DEVICE-MIB ·
.1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.33
Object
column
r/w
Enumeration
The transmit digital gain adjustment (dBm) for voice for a specific endpoint. When set to a value other than disabled(-128), this MIB supersedes the arrisMtaDevGainControlTxVoice MIB. A value of 2 increases the voice level by 2 dBm. A value of -2 decreases the voice level by 2 dBm. This value does not effect the levels of local tones or FSK. Setting this MIB to disabled(-128) will disable this MIB and the Tx Voice Gain will now be set by the arrisMtaDevGainControlTxVoice MIB. NOTE: Use caution when changing this MIB. Increasing or decreasing the voice level by the larger numbers allowed in the range may compromise voice quality.
Context
- MIB
- ARRIS-MTA-DEVICE-MIB
- OID
.1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.33- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- arrisMtaDevEndPntEntry
- Table
- arrisMtaDevEndPntTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
-128 | disabled |
-16 | dBm-16 |
-15 | dBm-15 |
-14 | dBm-14 |
-13 | dBm-13 |
-12 | dBm-12 |
-11 | dBm-11 |
-10 | dBm-10 |
-9 | dBm-9 |
-8 | dBm-8 |
-7 | dBm-7 |
-6 | dBm-6 |
-5 | dBm-5 |
-4 | dBm-4 |
-3 | dBm-3 |
-2 | dBm-2 |
-1 | dBm-1 |
0 | dBm0 |
1 | dBm1 |
2 | dBm2 |
3 | dBm3 |
4 | dBm4 |
5 | dBm5 |
6 | dBm6 |
7 | dBm7 |
8 | dBm8 |
9 | dBm9 |
10 | dBm10 |
11 | dBm11 |
12 | dBm12 |
13 | dBm13 |
14 | dBm14 |
15 | dBm15 |
16 | dBm16 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| arrisMtaDevEndPntIndex The unique value which identifies the port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.1 |
| arrisMtaDevEndPntDialingMethod Indicates the method used to dial the digits for this telephony
endpoint. If tone(1), tone dialing (DTMF) is used. If pulse(2),
dial-pulse signaling is used to dial the digits, T… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.24 |
| arrisMtaDevEndPntRingingWaveform Indicates the voltage waveform used when ringing this telephony
endpoint. If normal(1) is used the standard waveform will be applied.
If sinusoidal(2) is specified, extra wavesha… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.25 |
| arrisMtaDevEndPntFaxOnlyLineTimeout This object is used to define a line as a fax only line for NCS. The default value of the
object is zero which means no timeout. When the object is set to a non-zero value
a tim… | column | Integer32 | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.26 |
| arrisMtaDevPersistentLineStatus Set persistent line status. This MIB and the ifAdminStatus MIB impact the
line status. If ignore(0) is set, the line status will be based on the
setting of ifAdminStatus in the M… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.27 |
| arrisMtaDevEndPntCallWaitingRepeatSteady When enabled(1), it indicates that the call waiting tone should repeat forever.
If disabled(0), it concludes using the finite rules. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.28 |
| arrisMtaDevEndPntCIDEnable Used to enable/disable the All the Caller ID field send to phone.
If it's diabled, no Caller ID information will be sent. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.29 |
| arrisMtaDevEndPntCIDNameEnable Used to enable/disable the Name part of CallerID field send to phone. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.30 |
| arrisMtaDevEndPntCIDDateTimeEnable Used to enable/disable the Date/Time part of CallerID field send to phone. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.31 |
| arrisMtaDevEndPntLoopReversal This mib is used to manage loop polarity/reversal. When enabled(1), it indicates that
the line should be reversed to normal once the originating party hangs up first.
If disabled… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.32 |
| arrisMtaDevEndPntGainControlRxVoice The transmit digital gain adjustment (dBm) for voice for a specific endpoint.
When set to a value other than disabled(-128), this MIB supersedes the
arrisMtaDevGainControlRxVoice… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.34 |
| arrisMtaDevEndPntHDAudioEnable The setting of this MIB sets an individual line to support HD Audio codecs such as G722.
The MTA MIB setting for arrisMtaDevHDAudioEnable can override the individual line setting… | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.35 |
| arrisMtaDevEndPntHDAudioStatus Use this MIB to read the effective status of HD Audio for an endpoint. | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.36 |
| arrisMtaDevEndPntCallPState Use this MIB to read the status of callp state | column | Enumeration | .1.3.6.1.4.1.4115.1.3.3.1.2.4.3.1.37 |