AQUARADIO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
43

rmPropertiesTable

table
.1.3.6.1.4.1.3942.1.1.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk rmPropertiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::rmPropertiesTable' 
This table contains various radiomodule operation mode settings.
rmPropertiesEntry row .1.3.6.1.4.1.3942.1.1.2.1.1
An entry in the rmPropertiesTable Table.
Indexes
Column Syntax OID
rmPropertiesIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573'…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.1
rmType
Radiomodule type.
OctetString .1.3.6.1.4.1.3942.1.1.2.1.1.2
rmFrequency
This value indicates radiomodule's operating frequency in KHz.
KHzSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.3
rmBitRate
This value indicates radiomodule's current bitrate in kbits
per second.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.4
rmSid
This value indicates radiomodule's sid.
RadioSIDr/w .1.3.6.1.4.1.3942.1.1.2.1.1.5
rmCurPowerLevel
This value indicates radiomodule's power output level (tenth dBm).
tenth dBm.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.6
rmModulation
This value indicates radiomodule's modulation type.
Enumerationr/w
Enumerated Values:
0irrelevant
1cck
2mok
 .1.3.6.1.4.1.3942.1.1.2.1.1.7
rmAntenna
This value defines what antenna is used for receiving
and transmission.
Enumerationr/w
Enumerated Values:
1right
2left
3div
4both
5txr
6txl
 .1.3.6.1.4.1.3942.1.1.2.1.1.8
rmDistance
This value indicates radiomodule's distance parameter
in kilometers
kilometersSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.9
rmBurst
This value indicates whether burst mode support is turned on
or off. The burst mode will be active when using MINT protocol
and burst mode support is turned on both base station
and CPE.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.10
rmLongRange
This value indicates whether long range mode is turned
on or off. Long range mode allows to establish links
at long distances. Regretfully, implementation of 802.11b
protocol at Aironet/Cisco radiomodules is intended fo…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.11
rmPowerCtl
This value indicates whether automatic power control mode
is turned on or off.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.12
rmTXRT
This attribute shall indicate the maximum number of
transmission attempts of a unicast packet that shall be made
before a failure condition is indicated. The default value
of this attribute is 16.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.13
rmTXVRT
This attribute shall indicate the maximum number of
transmission attempts of a unicast packet that shall be made
before a failure condition is indicated, when voice mode
is active. Voice mode is activated automatically …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.14
rmPTP
Turns on or off maximum air utilization mode. Can be used
for high-speed point-to-point link, unsuitable for cell
organization. (For 2Mbit radiomodules or radiomodules
in LongRange mode only)
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.15
rmWOCD
Turns on or off WOCD(without carrier detect) mode. Can be used
on base station with marker access only. Allows to decrease
retry packets number and therefore increase the performance
of the cell. (For 2Mbit or 54Mbit ra…
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.16
rmBCsid
Turns on or off sid broadcast mode for greater security of the
network. When sid broadcast is turned off, all devices
in the network must have sid value set explicitly.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.17
rmDistanceAuto
Turns on or off automatic adjustment of distance parameter.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.3942.1.1.2.1.1.18
rmNoiseFloor
The current noise floor in dBm.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.1.1.19
rmBandwidth
Current radio channel size in KHz.
KHzSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.1.1.20
rmChainMode
Radio channel technology.
Enumeration
Enumerated Values:
1miso
2mimo
 .1.3.6.1.4.1.3942.1.1.2.1.1.21
rmSelectChannel
0 is always returned for GET operations.
For SET operation:
1 means 'change frequency if better choice exists,
else keep current value';
2 means 'change frequency in any case,
then use the best choice among the remainin…
Enumerationr/w
Enumerated Values:
0reading-stub
1new
2renew
 .1.3.6.1.4.1.3942.1.1.2.1.1.22

rmPowerLevelsTable

table
.1.3.6.1.4.1.3942.1.1.2.4 · 1 row entry · 3 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk rmPowerLevelsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::rmPowerLevelsTable' 
This table contains radiomodule power level capabilities.
rmPowerLevelsEntry row .1.3.6.1.4.1.3942.1.1.2.4.1
An entry in the rmPowerLevelsTable table.
Indexes
Column Syntax OID
rmPowerLevelsIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573'…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.4.1.1
rmPowerLevelsValIndex
The index value which uniquely identifies one of possible
values of power level for interface selected by
rmPowerLevelsIfIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.4.1.2
rmPowerLevelsPower
This value indicates possible power level (tenth dBm).
tenth dBm.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.4.1.3

rmFrequenciesTable

table
.1.3.6.1.4.1.3942.1.1.2.5 · 1 row entry · 3 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk rmFrequenciesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::rmFrequenciesTable' 
This table contains radiomodule frequency capabilities.
rmFrequenciesEntry row .1.3.6.1.4.1.3942.1.1.2.5.1
An entry in the rmFrequenciesTable table.
Indexes
Column Syntax OID
rmFrequenciesIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573'…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.5.1.1
rmFrequenciesValIndex
The index value which uniquely identifies one of possible
values of frequency for interface selected by
rmFrequenciesIfIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.5.1.2
rmFrequenciesFreq
This value indicates possible frequency in MHz.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.5.1.3

rmBitratesTable

table
.1.3.6.1.4.1.3942.1.1.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk rmBitratesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::rmBitratesTable' 
This table contains radiomodule bitrate capabilities.
rmBitratesEntry row .1.3.6.1.4.1.3942.1.1.2.6.1
An entry in the rmBitratesTable table.
Indexes
Column Syntax OID
rmBitratesIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573'…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.6.1.1
rmBitratesValIndex
The index value which uniquely identifies one of possible
values of bitrate for interface selected by
rmBitratesIfIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.6.1.2
rmBitratesBitrate
This value indicates possible bitrate in bits per second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.6.1.3

radioStatTable

table
.1.3.6.1.4.1.3942.1.1.2.7 · 1 row entry · 9 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk radioStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::radioStatTable' 
A table of packet statistics for each of the links
(by MAC address).
radioStatEntry row .1.3.6.1.4.1.3942.1.1.2.7.1
Each entry contains statistics for one link (MAC address).
Indexes
Column Syntax OID
radioStatMacAddress
MAC address of the rf interface link is established with.
OctetString
Constraints:
range: 6-6
 .1.3.6.1.4.1.3942.1.1.2.7.1.1
radioStatPackets
Number of unique packets sent to this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.2
radioStatRepeats
Number of repeat packets tries sent to this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.3
radioStatRepeatPackets
Number of unique repeat packets sent to this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.4
radioStatBytes
Number of bytes in unique packets sent to this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.5
radioStatRepeatBytes
Number of bytes in repeat packets tries sent to this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.6
radioStatErrors
Number of errors when attempted to send a packet to this
MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.7
radioStatRecvPackets
Number of unique packets received from this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.8
radioStatRecvBytes
Number of bytes in unique packets received from this MAC address.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3942.1.1.2.7.1.9

rmBandsTable

table
.1.3.6.1.4.1.3942.1.1.2.8 · 1 row entry · 3 columns
Open in standard view
Uses the infinet variant from /opt/observium/mibs/infinet.
Command help
Walk rmBandsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'AQUARADIO-MIB' -M '/opt/observium/mibs/infinet:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'AQUARADIO-MIB::rmBandsTable' 
This table contains radiomodule possible bandwidths.
rmBandsEntry row .1.3.6.1.4.1.3942.1.1.2.8.1
An entry in the rmBandsTable.
Indexes
Column Syntax OID
rmBandsIfIndex
The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of RFC 1573'…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.8.1.1
rmBandsValIndex
The index value which uniquely identifies one of possible
values of bandwidth for interface selected by
rmBandsIfIndex.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.3942.1.1.2.8.1.2
rmBandsBand
This value indicates one of possible bandwidth in Hz for
interface selected by rmBandsIfIndex.
HzSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3942.1.1.2.8.1.3