APPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
15
Rows
15
Columns
243
.1.3.6.1.2.1.34.4.1.1.4.1 · 1 row entry · 18 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnPortTable'
The Port table describes the configuration and current status
of the ports used by APPN.  When it is known to the APPN
component, an OBJECT IDENTIFIER pointing to additional
information related to the port is included.  This may, but
need not, be a RowPointer to an ifTable entry for a DLC
interface immediately 'below' the port.
appnPortEntry row .1.3.6.1.2.1.34.4.1.1.4.1.1
The port name is used as the index to this table.
Indexes
Column Syntax OID
Administratively assigned name for this APPN port.
OctetString
Constraints:
range: 1-10
.1.3.6.1.2.1.34.4.1.1.4.1.1.1
Object by which a Management Station can activate, deactivate,
or recycle (i.e., cause to be deactivated and then immediately
activated) a port, by setting the value to activate(1),
deactivate(2), or recycle(3), respect…
Enumerationr/w
Enumerated Values:
1deactivate
2activate
3recycle
4ready
.1.3.6.1.2.1.34.4.1.1.4.1.1.2
Indicates the current state of this port:

inactive(1) - port is inactive
pendactive(2) - port is pending active
active(3) - port is active
pendinact(4) - port is pending inactive
Enumeration
Enumerated Values:
1inactive
2pendactive
3active
4pendinact
.1.3.6.1.2.1.34.4.1.1.4.1.1.3
The type of DLC interface, distinguished according to the
protocol immediately 'below' this layer.
IANAifType-MIBIANAifType
Type Values:
1other
2regular1822
3hdh1822
4ddnX25
5rfc877x25
6ethernetCsmacd
7iso88023Csmacd
8iso88024TokenBus
9iso88025TokenRing
10iso88026Man
11starLan
12proteon10Mbit
13proteon80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frameRelay
33rs232
34para
35arcnet
36arcnetPlus
37atm
38miox25
39sonet
40x25ple
41iso88022llc
42localTalk
43smdsDxi
44frameRelayService
45v35
46hssi
47hippi
48modem
49aal5
50sonetPath
51sonetVT
52smdsIcip
53propVirtual
54propMultiplexor
55ieee80212
56fibreChannel
57hippiInterface
58frameRelayInterconnect
59aflane8023
60aflane8025
61cctEmul
62fastEther
63isdn
64v11
65v36
66g703at64k
67g703at2mb
68qllc
69fastEtherFX
70channel
71ieee80211
72ibm370parChan
73escon
74dlsw
75isdns
76isdnu
77lapd
78ipSwitch
79rsrb
80atmLogical
81ds0
82ds0Bundle
83bsc
84async
85cnr
86iso88025Dtr
87eplrs
88arap
89propCnls
90hostPad
91termPad
92frameRelayMPI
93x213
94adsl
95radsl
96sdsl
97vdsl
98iso88025CRFPInt
99myrinet
100voiceEM
101voiceFXO
102voiceFXS
103voiceEncap
104voiceOverIp
105atmDxi
106atmFuni
107atmIma
108pppMultilinkBundle
109ipOverCdlc
110ipOverClaw
111stackToStack
112virtualIpAddress
113mpc
114ipOverAtm
115iso88025Fiber
116tdlc
117gigabitEthernet
118hdlc
119lapf
120v37
121x25mlp
122x25huntGroup
123transpHdlc
124interleave
125fast
126ip
127docsCableMaclayer
128docsCableDownstream
129docsCableUpstream
130a12MppSwitch
131tunnel
132coffee
133ces
134atmSubInterface
135l2vlan
136l3ipvlan
137l3ipxvlan
138digitalPowerline
139mediaMailOverIp
140dtm
141dcn
142ipForward
143msdsl
144ieee1394
145if-gsn
146dvbRccMacLayer
147dvbRccDownstream
148dvbRccUpstream
149atmVirtual
150mplsTunnel
151srp
152voiceOverAtm
153voiceOverFrameRelay
154idsl
155compositeLink
156ss7SigLink
157propWirelessP2P
158frForward
159rfc1483
160usb
161ieee8023adLag
162bgppolicyaccounting
163frf16MfrBundle
164h323Gatekeeper
165h323Proxy
166mpls
167mfSigLink
168hdsl2
169shdsl
170ds1FDL
171pos
172dvbAsiIn
173dvbAsiOut
174plc
175nfas
176tr008
177gr303RDT
178gr303IDT
179isup
180propDocsWirelessMaclayer
181propDocsWirelessDownstream
182propDocsWirelessUpstream
183hiperlan2
184propBWAp2Mp
185sonetOverheadChannel
186digitalWrapperOverheadChannel
187aal2
188radioMAC
189atmRadio
190imt
191mvl
192reachDSL
193frDlciEndPt
194atmVciEndPt
195opticalChannel
196opticalTransport
197propAtm
198voiceOverCable
199infiniband
200teLink
201q2931
202virtualTg
203sipTg
204sipSig
205docsCableUpstreamChannel
206econet
207pon155
208pon622
209bridge
210linegroup
211voiceEMFGD
212voiceFGDEANA
213voiceDID
214mpegTransport
215sixToFour
216gtp
217pdnEtherLoop1
218pdnEtherLoop2
219opticalChannelGroup
220homepna
221gfp
222ciscoISLvlan
223actelisMetaLOOP
224fcipLink
225rpr
226qam
227lmp
228cblVectaStar
229docsCableMCmtsDownstream
230adsl2
231macSecControlledIF
232macSecUncontrolledIF
233aviciOpticalEther
234atmbond
235voiceFGDOS
236mocaVersion1
237ieee80216WMAN
238adsl2plus
239dvbRcsMacLayer
240dvbTdm
241dvbRcsTdma
242x86Laps
243wwanPP
244wwanPP2
245voiceEBS
246ifPwType
247ilan
248pip
249aluELP
250gpon
251vdsl2
252capwapDot11Profile
253capwapDot11Bss
254capwapWtpVirtualRadio
255bits
256docsCableUpstreamRfPort
257cableDownstreamRfPort
258vmwareVirtualNic
259ieee802154
260otnOdu
261otnOtu
262ifVfiType
263g9981
264g9982
265g9983
266aluEpon
267aluEponOnu
268aluEponPhysicalUni
269aluEponLogicalLink
270aluGponOnu
271aluGponPhysicalUni
272vmwareNicTeam
277docsOfdmDownstream
278docsOfdmaUpstream
279gfast
280sdci
281xboxWireless
282fastdsl
283docsCableScte55d1FwdOob
284docsCableScte55d1RetOob
285docsCableScte55d2DsOob
286docsCableScte55d2UsOob
287docsCableNdf
288docsCableNdr
289ptm
290ghn
291otnOtsi
292otnOtuc
293otnOduc
294otnOtsig
295microwaveCarrierTermination
296microwaveRadioLinkTerminal
297ieee8021axDrni
298ax25
299ieee19061nanocom
300cpri
301omni
302roe
303p2pOverLan
.1.3.6.1.2.1.34.4.1.1.4.1.1.4
Identifies the type of line used by this port:

leased(1) - leased line
switched(2) - switched line
sharedAccessFacilities(3) - shared access facility, such
Enumeration
Enumerated Values:
1leased
2switched
3sharedAccessFacilities
.1.3.6.1.2.1.34.4.1.1.4.1.1.5
Indicates whether Set Initialization Mode (SIM) and Receive
Initialization Mode (RIM) are supported for this port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.4.1.1.6
Initial role for link stations activated through this port.
The values map to the following settings in the initial XID,
where 'ABM' indicates asynchronous balanced mode and 'NRM'
indicated normal response mode:
Enumeration
Enumerated Values:
1primary
2secondary
3negotiable
4abm
.1.3.6.1.2.1.34.4.1.1.4.1.1.7
Indicates whether the node supports negotiable link stations
for this port.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.4.1.1.8
Indicates whether this node allows call-in on this port from
nodes not defined locally.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.4.1.1.9
Maximum Basic Transmission Unit (BTU) size that a link station
on this port can receive.

This object corresponds to bytes 21-22 of XID3.
bytesInteger32
Constraints:
range: 99-32767
.1.3.6.1.2.1.34.4.1.1.4.1.1.10
Maximum number of I-frames that can be received by the XID
sender before an acknowledgement is received.
I-framesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.4.1.1.11
The total number of successful XID exchanges that have
occurred on all defined link stations on this port since the
last time this port was started.
XID exchangesAppnPortCounter .1.3.6.1.2.1.34.4.1.1.4.1.1.12
The total number of unsuccessful XID exchanges that have
occurred on all defined link stations on this port since the
last time this port was started.
XID exchangesAppnPortCounter .1.3.6.1.2.1.34.4.1.1.4.1.1.13
The total number of successful XID exchanges that have
occurred on all dynamic link stations on this port since the
last time this port was started.
XID exchangesAppnPortCounter .1.3.6.1.2.1.34.4.1.1.4.1.1.14
The total number of unsuccessful XID exchanges that have
occurred on all dynamic link stations on this port since the
last time this port was started.
XID exchangesAppnPortCounter .1.3.6.1.2.1.34.4.1.1.4.1.1.15
Identifies the object, e.g., one in a DLC-specific MIB, that
can provide additional information related to this port.

If the agent is unable to identify such an object, the value
0.0 is returned.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.2.1.34.4.1.1.4.1.1.16
Local DLC address of this port.
DisplayableDlcAddress
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.1.4.1.1.17
The value of the sysUpTime object the last time the port was
started.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.2.1.34.4.1.1.4.1.1.18

appnLsTable

table
.1.3.6.1.2.1.34.4.1.1.5.1 · 1 row entry · 45 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnLsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnLsTable'
This table contains detailed information about the link
station configuration and its current status.
appnLsEntry row .1.3.6.1.2.1.34.4.1.1.5.1.1
This table is indexed by the link station name.
Indexes
Column Syntax OID
Administratively assigned name for the link station.
The name can be from one to ten characters.
OctetString
Constraints:
range: 1-10
.1.3.6.1.2.1.34.4.1.1.5.1.1.1
Object by which a Management Station can activate, deactivate,
or recycle (i.e., cause to be deactivated and then immediately
reactivated) a link station, by setting the value to
activate(1), deactivate(2), or recycle(3…
Enumerationr/w
Enumerated Values:
1deactivate
2activate
3recycle
4ready
.1.3.6.1.2.1.34.4.1.1.5.1.1.2
State of this link station. The comments map these more
granular states to the 'traditional' four states for SNA
resources. Values (2) through (5) represent the normal
progression of states when a link station is bein…
Enumeration
Enumerated Values:
1inactive
2sentConnectOut
3pendXidExch
4sendActAs
5sendSetMode
6otherPendingActive
7active
8sentDeactAsOrd
9sentDiscOrd
10sentDiscImmed
11otherPendingInact
.1.3.6.1.2.1.34.4.1.1.5.1.1.3
Administratively assigned name for the port associated with

this link station. The name can be from one to ten
characters.
OctetString
Constraints:
range: 1-10
.1.3.6.1.2.1.34.4.1.1.5.1.1.4
The type of DLC interface, distinguished according to the
protocol immediately 'below' this layer.
IANAifType-MIBIANAifType
Type Values:
1other
2regular1822
3hdh1822
4ddnX25
5rfc877x25
6ethernetCsmacd
7iso88023Csmacd
8iso88024TokenBus
9iso88025TokenRing
10iso88026Man
11starLan
12proteon10Mbit
13proteon80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frameRelay
33rs232
34para
35arcnet
36arcnetPlus
37atm
38miox25
39sonet
40x25ple
41iso88022llc
42localTalk
43smdsDxi
44frameRelayService
45v35
46hssi
47hippi
48modem
49aal5
50sonetPath
51sonetVT
52smdsIcip
53propVirtual
54propMultiplexor
55ieee80212
56fibreChannel
57hippiInterface
58frameRelayInterconnect
59aflane8023
60aflane8025
61cctEmul
62fastEther
63isdn
64v11
65v36
66g703at64k
67g703at2mb
68qllc
69fastEtherFX
70channel
71ieee80211
72ibm370parChan
73escon
74dlsw
75isdns
76isdnu
77lapd
78ipSwitch
79rsrb
80atmLogical
81ds0
82ds0Bundle
83bsc
84async
85cnr
86iso88025Dtr
87eplrs
88arap
89propCnls
90hostPad
91termPad
92frameRelayMPI
93x213
94adsl
95radsl
96sdsl
97vdsl
98iso88025CRFPInt
99myrinet
100voiceEM
101voiceFXO
102voiceFXS
103voiceEncap
104voiceOverIp
105atmDxi
106atmFuni
107atmIma
108pppMultilinkBundle
109ipOverCdlc
110ipOverClaw
111stackToStack
112virtualIpAddress
113mpc
114ipOverAtm
115iso88025Fiber
116tdlc
117gigabitEthernet
118hdlc
119lapf
120v37
121x25mlp
122x25huntGroup
123transpHdlc
124interleave
125fast
126ip
127docsCableMaclayer
128docsCableDownstream
129docsCableUpstream
130a12MppSwitch
131tunnel
132coffee
133ces
134atmSubInterface
135l2vlan
136l3ipvlan
137l3ipxvlan
138digitalPowerline
139mediaMailOverIp
140dtm
141dcn
142ipForward
143msdsl
144ieee1394
145if-gsn
146dvbRccMacLayer
147dvbRccDownstream
148dvbRccUpstream
149atmVirtual
150mplsTunnel
151srp
152voiceOverAtm
153voiceOverFrameRelay
154idsl
155compositeLink
156ss7SigLink
157propWirelessP2P
158frForward
159rfc1483
160usb
161ieee8023adLag
162bgppolicyaccounting
163frf16MfrBundle
164h323Gatekeeper
165h323Proxy
166mpls
167mfSigLink
168hdsl2
169shdsl
170ds1FDL
171pos
172dvbAsiIn
173dvbAsiOut
174plc
175nfas
176tr008
177gr303RDT
178gr303IDT
179isup
180propDocsWirelessMaclayer
181propDocsWirelessDownstream
182propDocsWirelessUpstream
183hiperlan2
184propBWAp2Mp
185sonetOverheadChannel
186digitalWrapperOverheadChannel
187aal2
188radioMAC
189atmRadio
190imt
191mvl
192reachDSL
193frDlciEndPt
194atmVciEndPt
195opticalChannel
196opticalTransport
197propAtm
198voiceOverCable
199infiniband
200teLink
201q2931
202virtualTg
203sipTg
204sipSig
205docsCableUpstreamChannel
206econet
207pon155
208pon622
209bridge
210linegroup
211voiceEMFGD
212voiceFGDEANA
213voiceDID
214mpegTransport
215sixToFour
216gtp
217pdnEtherLoop1
218pdnEtherLoop2
219opticalChannelGroup
220homepna
221gfp
222ciscoISLvlan
223actelisMetaLOOP
224fcipLink
225rpr
226qam
227lmp
228cblVectaStar
229docsCableMCmtsDownstream
230adsl2
231macSecControlledIF
232macSecUncontrolledIF
233aviciOpticalEther
234atmbond
235voiceFGDOS
236mocaVersion1
237ieee80216WMAN
238adsl2plus
239dvbRcsMacLayer
240dvbTdm
241dvbRcsTdma
242x86Laps
243wwanPP
244wwanPP2
245voiceEBS
246ifPwType
247ilan
248pip
249aluELP
250gpon
251vdsl2
252capwapDot11Profile
253capwapDot11Bss
254capwapWtpVirtualRadio
255bits
256docsCableUpstreamRfPort
257cableDownstreamRfPort
258vmwareVirtualNic
259ieee802154
260otnOdu
261otnOtu
262ifVfiType
263g9981
264g9982
265g9983
266aluEpon
267aluEponOnu
268aluEponPhysicalUni
269aluEponLogicalLink
270aluGponOnu
271aluGponPhysicalUni
272vmwareNicTeam
277docsOfdmDownstream
278docsOfdmaUpstream
279gfast
280sdci
281xboxWireless
282fastdsl
283docsCableScte55d1FwdOob
284docsCableScte55d1RetOob
285docsCableScte55d2DsOob
286docsCableScte55d2UsOob
287docsCableNdf
288docsCableNdr
289ptm
290ghn
291otnOtsi
292otnOtuc
293otnOduc
294otnOtsig
295microwaveCarrierTermination
296microwaveRadioLinkTerminal
297ieee8021axDrni
298ax25
299ieee19061nanocom
300cpri
301omni
302roe
303p2pOverLan
.1.3.6.1.2.1.34.4.1.1.5.1.1.5
Identifies whether this is a dynamic link station. Dynamic
link stations are created when links that have not been locally
defined are established by adjacent nodes.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.6
Fully qualified name of the adjacent node for this link
station. An adjacent node is identified using the format
specified in the SnaControlPointName textual convention.

The value of this object is deter…
OctetString
Constraints:
range: 0-0
range: 3-17
.1.3.6.1.2.1.34.4.1.1.5.1.1.7
Node type of the adjacent node on this link:

networkNode(1) - APPN network node
endNode(2) - APPN end node
t21len(4) - LEN end node
unknown(255) - the agent does not know the node type
Enumeration
Enumerated Values:
1networkNode
2endNode
4t21len
255unknown
.1.3.6.1.2.1.34.4.1.1.5.1.1.8
Number associated with the TG to this link station, with a
range from 0 to 256. A value of 256 indicates that the TG
number has not been negotiated and is unknown at this time.
Integer32
Constraints:
range: 0-256
.1.3.6.1.2.1.34.4.1.1.5.1.1.9
Indicates whether the link station is a limited resource. A
link station that is a limited resource is deactivated when it
is no longer in use.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.10
Indicates whether the link station is activatable on demand.

Such a link station is reported in the topology as active
regardless of its actual state, so that it can be considered in
route calculations. …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.11
Indicates whether this link station will be used for
connections to down-level or migration partners.

In general, migration nodes do not append their CP names on
XID3. Such nodes: (1) will not support p…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.12
The partner's Node Identification, from bytes 2-5 of the XID
received from the partner. If this value is not available,
then the characters '00000000' are returned.
SnaNodeIdentification
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.1.1.13
Indicates whether CP-CP sessions are supported by this
link station. For a dynamic link, this object represents
the default ('Admin') value.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.14
Numeric value between 99 and 32767 inclusive indicating the
maximum number of bytes in a Basic Transmission Unit (BTU) sent
on this link.

When the link state (returned by the appnLsOperState object) is
in…
bytesInteger32
Constraints:
range: 99-32767
.1.3.6.1.2.1.34.4.1.1.5.1.1.15
Number of XID bytes received. All of the bytes in the SNA
basic transmission unit (BTU), i.e., all of the bytes in the
DLC XID Information Field, are counted.
bytesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.16
Number of message (I-frame) bytes received. All of the bytes
in the SNA basic transmission unit (BTU), including the
transmission header (TH), are counted.
bytesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.17
Number of XID frames received.
XID framesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.18
Number of message (I-frame) frames received.
I-framesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.19
Number of XID bytes sent. All of the bytes in the SNA basic
transmission unit (BTU), i.e., all of the bytes in the DLC XID
Information Field, are counted.
bytesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.20
Number of message (I-frame) bytes sent. All of the bytes
in the SNA basic transmission unit (BTU), including the
transmission header (TH), are counted.
bytesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.21
Number of XID frames sent.
XID framesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.22
Number of message (I-frame) frames sent.
I-framesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.23
Number of echo responses returned from adjacent link station.
A response should be returned for each test frame sent by this
node. Test frames are sent to adjacent nodes periodically to
verify connectivity and to measu…
echo responsesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.24
The time that it took for the last test signal to be sent and
returned from this link station to the adjacent link station.
This time is represented in milliseconds.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.5.1.1.25
The longest time it took for a test signal to be sent and
returned from this link station to the adjacent link station.

This time is represented in milliseconds .

The value 0 is returned if…
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.5.1.1.26
The shortest time it took for a test signal to be sent and
returned from this link station to the adjacent link station.
This time is represented in milliseconds.

The value 0 is returned if no test signal…
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.5.1.1.27
The time when the longest delay occurred. This time can be
used to identify when this high water mark occurred in relation
to other events in the APPN node, for example, the time at
which an APPC session was either ter…
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.2.1.34.4.1.1.5.1.1.28
The total number of successful XID exchanges that have
occurred on this link station since the time it was started.
XID exchangesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.29
The total number of unsuccessful XID exchanges that have
occurred on this link station since the time it was started.
XID exchangesAppnLinkStationCounter .1.3.6.1.2.1.34.4.1.1.5.1.1.30
Identifies the object, e.g., one in a DLC-specific MIB, that
can provide additional information related to this link
station.

If the agent is unable to identify such an object, the value
0.0 is returned.
SNMPv2-TCRowPointer
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
.1.3.6.1.2.1.34.4.1.1.5.1.1.31
The cumulative amount of time since the node was last
reinitialized, measured in hundredths of a second, that this
link station has been in the active state. A zero value
indicates that the link station has never been …
hundredths of a secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.5.1.1.32
The amount of time, measured in hundredths of a second, that

the link station has been in its current state.
hundredths of a secondSNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.1.5.1.1.33
Indicates the level of high performance routing (HPR) support
over this link:

noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR base (option set 1400)
Enumeration
Enumerated Values:
1noHprSupport
2hprBaseOnly
3rtpTower
4controlFlowsOverRtpTower
.1.3.6.1.2.1.34.4.1.1.5.1.1.34
Indicates whether the link station is supporting
HPR link-level error recovery.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.35
The forward Automatic Network Routing (ANR) label for this
link station. If the link does not support HPR or the value is
unknown, a zero-length string is returned.
OctetString
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.1.1.36
The reverse Automatic Network Routing (ANR) label for this
link station. If the link does not support HPR or the value is
unknown, a zero-length string is returned.
OctetString
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.1.1.37
The network connection endpoint identifier (NCE ID) for CP-CP
sessions if this node supports the HPR transport tower, a
zero-length string if the value is unknown or not meaningful
for this node.
OctetString
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.1.1.38
The network connection endpoint identifier (NCE ID) for Route
Setup if this node supports the HPR transport tower, a zero-
length string if the value is unknown or not meaningful for
this node.
OctetString
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.1.1.39
The network connection endpoint identifier (NCE ID) for the
APPN/HPR boundary function if this node supports the HPR
transport tower, a zero-length string if the value is unknown
or not meaningful for this node.
OctetString
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.1.1.40
Local address of this link station.
DisplayableDlcAddress
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.1.5.1.1.41
Address of the remote link station on this link.
DisplayableDlcAddress
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.1.5.1.1.42
Remote link station discovered from the XID exchange.
The name can be from one to ten characters. A zero-length
string indicates that the value is not known.
OctetString
Constraints:
range: 0-10
.1.3.6.1.2.1.34.4.1.1.5.1.1.43
The value of the sysUpTime object the last time the link
station was started.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.2.1.34.4.1.1.5.1.1.44
Indicates whether the link is a member of a multi-link TG. If
the link's TG has been brought up as a multi-link TG, then the
link is reported as a member of a multi-link TG, even if it is

currently the o…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.1.1.45
.1.3.6.1.2.1.34.4.1.1.5.2 · 1 row entry · 16 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnLsStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnLsStatusTable'
This table contains information related to exceptional and
potentially exceptional conditions that occurred during the
activation, XID exchange, and termination of a connection.  No
entries are created when these activities proceed normally.
          
It is an implementation option when entries are removed from
this table.
appnLsStatusEntry row .1.3.6.1.2.1.34.4.1.1.5.2.1
This table is indexed by the LsStatusIndex, which is an
integer that is continuously updated until it eventually
wraps.
Column Syntax OID
Table index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.2.1.34.4.1.1.5.2.1.1
Time when the exception condition occurred. This time can be
used to identify when this event occurred in relation to other
events in the APPN node, for example, the time at which an APPC
session was either terminated …
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.2.1.34.4.1.1.5.2.1.2
Administratively assigned name for the link station
experiencing the condition.
OctetString
Constraints:
range: 1-10
.1.3.6.1.2.1.34.4.1.1.5.2.1.3
Fully qualified name of the adjacent node for this link
station. An adjacent node is identified using the format
specified in the SnaControlPointName textual convention.

The value of this object is deter…
OctetString
Constraints:
range: 3-17
range: 0-0
.1.3.6.1.2.1.34.4.1.1.5.2.1.4
The partner's Node Identification, from bytes 2-5 of the XID
received from the partner. If this value is not available,
then the characters '00000000' are returned.
SnaNodeIdentification
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.2.1.5
Number associated with the TG to this link station, with a
range from 0 to 256. A value of 256 indicates that the TG
number was unknown at the time of the failure.
Integer32
Constraints:
range: 0-256
.1.3.6.1.2.1.34.4.1.1.5.2.1.6
The error sense data associated with the start sequence of
activation of a link up to the beginning of the XID sequence.

This is the sense data that came from Configuration Services
whenever the link did …
SnaSenseData
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.2.1.7
Indicates whether the node will retry the start request to
activate the link.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.1.5.2.1.8
The sense data associated with the termination of the link
connection to adjacent node.

This is the sense data that came from the DLC layer.
SnaSenseData
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.2.1.9
The sense data associated with the rejection of the XID.

This is the sense data that came from the local node (this
node) when it built the XID Negotiation Error control vector
(cv22) to send to the remot…
SnaSenseData
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.2.1.10
The sense data the adjacent node returned to this node
indicating the reason the XID was rejected.

This is the sense data that came from the remote node in the
XID Negotiation Error control vector (cv22) …
SnaSenseData
Type Constraints:
range: 8
.1.3.6.1.2.1.34.4.1.1.5.2.1.11
This object identifies the actual byte in the XID that caused
the error. The value 65536 indicates that the object has no
meaning.

For values in the range 0-65535, this object corresponds to
bytes 2-3 of…
Integer32
Constraints:
range: 0-65536
.1.3.6.1.2.1.34.4.1.1.5.2.1.12
This object identifies the actual bit in error (0 through 7)
within the errored byte of the XID. The value 8 indicates that
this object has no meaning.

For values in the range 0-7, this object correspond…
Integer32
Constraints:
range: 0-8
.1.3.6.1.2.1.34.4.1.1.5.2.1.13
The type of DLC interface, distinguished according to the
protocol immediately 'below' this layer.
IANAifType-MIBIANAifType
Type Values:
1other
2regular1822
3hdh1822
4ddnX25
5rfc877x25
6ethernetCsmacd
7iso88023Csmacd
8iso88024TokenBus
9iso88025TokenRing
10iso88026Man
11starLan
12proteon10Mbit
13proteon80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frameRelay
33rs232
34para
35arcnet
36arcnetPlus
37atm
38miox25
39sonet
40x25ple
41iso88022llc
42localTalk
43smdsDxi
44frameRelayService
45v35
46hssi
47hippi
48modem
49aal5
50sonetPath
51sonetVT
52smdsIcip
53propVirtual
54propMultiplexor
55ieee80212
56fibreChannel
57hippiInterface
58frameRelayInterconnect
59aflane8023
60aflane8025
61cctEmul
62fastEther
63isdn
64v11
65v36
66g703at64k
67g703at2mb
68qllc
69fastEtherFX
70channel
71ieee80211
72ibm370parChan
73escon
74dlsw
75isdns
76isdnu
77lapd
78ipSwitch
79rsrb
80atmLogical
81ds0
82ds0Bundle
83bsc
84async
85cnr
86iso88025Dtr
87eplrs
88arap
89propCnls
90hostPad
91termPad
92frameRelayMPI
93x213
94adsl
95radsl
96sdsl
97vdsl
98iso88025CRFPInt
99myrinet
100voiceEM
101voiceFXO
102voiceFXS
103voiceEncap
104voiceOverIp
105atmDxi
106atmFuni
107atmIma
108pppMultilinkBundle
109ipOverCdlc
110ipOverClaw
111stackToStack
112virtualIpAddress
113mpc
114ipOverAtm
115iso88025Fiber
116tdlc
117gigabitEthernet
118hdlc
119lapf
120v37
121x25mlp
122x25huntGroup
123transpHdlc
124interleave
125fast
126ip
127docsCableMaclayer
128docsCableDownstream
129docsCableUpstream
130a12MppSwitch
131tunnel
132coffee
133ces
134atmSubInterface
135l2vlan
136l3ipvlan
137l3ipxvlan
138digitalPowerline
139mediaMailOverIp
140dtm
141dcn
142ipForward
143msdsl
144ieee1394
145if-gsn
146dvbRccMacLayer
147dvbRccDownstream
148dvbRccUpstream
149atmVirtual
150mplsTunnel
151srp
152voiceOverAtm
153voiceOverFrameRelay
154idsl
155compositeLink
156ss7SigLink
157propWirelessP2P
158frForward
159rfc1483
160usb
161ieee8023adLag
162bgppolicyaccounting
163frf16MfrBundle
164h323Gatekeeper
165h323Proxy
166mpls
167mfSigLink
168hdsl2
169shdsl
170ds1FDL
171pos
172dvbAsiIn
173dvbAsiOut
174plc
175nfas
176tr008
177gr303RDT
178gr303IDT
179isup
180propDocsWirelessMaclayer
181propDocsWirelessDownstream
182propDocsWirelessUpstream
183hiperlan2
184propBWAp2Mp
185sonetOverheadChannel
186digitalWrapperOverheadChannel
187aal2
188radioMAC
189atmRadio
190imt
191mvl
192reachDSL
193frDlciEndPt
194atmVciEndPt
195opticalChannel
196opticalTransport
197propAtm
198voiceOverCable
199infiniband
200teLink
201q2931
202virtualTg
203sipTg
204sipSig
205docsCableUpstreamChannel
206econet
207pon155
208pon622
209bridge
210linegroup
211voiceEMFGD
212voiceFGDEANA
213voiceDID
214mpegTransport
215sixToFour
216gtp
217pdnEtherLoop1
218pdnEtherLoop2
219opticalChannelGroup
220homepna
221gfp
222ciscoISLvlan
223actelisMetaLOOP
224fcipLink
225rpr
226qam
227lmp
228cblVectaStar
229docsCableMCmtsDownstream
230adsl2
231macSecControlledIF
232macSecUncontrolledIF
233aviciOpticalEther
234atmbond
235voiceFGDOS
236mocaVersion1
237ieee80216WMAN
238adsl2plus
239dvbRcsMacLayer
240dvbTdm
241dvbRcsTdma
242x86Laps
243wwanPP
244wwanPP2
245voiceEBS
246ifPwType
247ilan
248pip
249aluELP
250gpon
251vdsl2
252capwapDot11Profile
253capwapDot11Bss
254capwapWtpVirtualRadio
255bits
256docsCableUpstreamRfPort
257cableDownstreamRfPort
258vmwareVirtualNic
259ieee802154
260otnOdu
261otnOtu
262ifVfiType
263g9981
264g9982
265g9983
266aluEpon
267aluEponOnu
268aluEponPhysicalUni
269aluEponLogicalLink
270aluGponOnu
271aluGponPhysicalUni
272vmwareNicTeam
277docsOfdmDownstream
278docsOfdmaUpstream
279gfast
280sdci
281xboxWireless
282fastdsl
283docsCableScte55d1FwdOob
284docsCableScte55d1RetOob
285docsCableScte55d2DsOob
286docsCableScte55d2UsOob
287docsCableNdf
288docsCableNdr
289ptm
290ghn
291otnOtsi
292otnOtuc
293otnOduc
294otnOtsig
295microwaveCarrierTermination
296microwaveRadioLinkTerminal
297ieee8021axDrni
298ax25
299ieee19061nanocom
300cpri
301omni
302roe
303p2pOverLan
.1.3.6.1.2.1.34.4.1.1.5.2.1.14
Local address of this link station.
DisplayableDlcAddress
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.1.5.2.1.15
Address of the remote link station on this link.
DisplayableDlcAddress
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.1.5.2.1.16

appnVrnTable

table
.1.3.6.1.2.1.34.4.1.1.6.1 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnVrnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnVrnTable'
This table relates a virtual routing node to an APPN port.
appnVrnEntry row .1.3.6.1.2.1.34.4.1.1.6.1.1
This table is indexed by the virtual routing node name, TG
number, and port name. There will be a matching entry in the
appnLocalTgTable to represent status and characteristics of the
TG representing each virtual routi…
Column Syntax OID
Administratively assigned name of the virtual routing node.
This is a fully qualified name, and matches the appnLocalTgDest
name in the appnLocalTgTable.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.1.6.1.1.1
Number associated with the transmission group representing
this virtual routing node definition.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.1.6.1.1.2
The name of the port this virtual routing node definition is
defined to.
OctetString
Constraints:
range: 1-10
.1.3.6.1.2.1.34.4.1.1.6.1.1.3
.1.3.6.1.2.1.34.4.1.2.2.3 · 1 row entry · 18 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnNnTopologyFRTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnNnTopologyFRTable'
Portion of the APPN topology database that describes all of
the APPN network nodes and virtual routing nodes known to this
node.
appnNnTopologyFREntry row .1.3.6.1.2.1.34.4.1.2.2.3.1
The FRSN and the fully qualified node name are used to index
this table.
Column Syntax OID
Flow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.2.2.3.1.1
Administratively assigned network name that is locally defined
at each network node.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.2.2.3.1.2
Number of days before deletion of this network node entry.
daysAppnTopologyEntryTimeLeft
Type Constraints:
range: 0..15
.1.3.6.1.2.1.34.4.1.2.2.3.1.3
Type of APPN node.
Enumeration
Enumerated Values:
1networkNode
3virtualRoutingNode
.1.3.6.1.2.1.34.4.1.2.2.3.1.4
Resource sequence number, which is assigned and controlled by
the network node that owns this resource. An odd number
indicates that information about the resource is inconsistent.

This object correspond…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.2.2.3.1.5
Route addition resistance.

This administratively assigned value indicates the relative
desirability of using this node for intermediate session
traffic. The value, which can be any integer 0-255, is used…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.3.1.6
Indicates whether this node is congested. This node is not be
included in route selection by other nodes when this congestion
exists.

This object corresponds to cv4580, byte 7, bit 0.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.7
Indicates whether intermediate session routing resources are
depleted. This node is not included in intermediate route
selection by other nodes when resources are depleted.

This object corresponds to cv4…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.8
Indicates whether the node is quiescing. This node is not
included in route selection by other nodes when the node is
quiescing.

This object corresponds to cv4580, byte 7, bit 5.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.9
Indicates whether the node provide gateway services.

This object corresponds to cv4580, byte 8, bit 0.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.10
Indicates whether the node supports central directory
services.

This object corresponds to cv4580, byte 8, bit 1.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.11
Indicates whether the node supports intermediate session
routing (ISR).

This object corresponds to cv4580, byte 8, bit 2.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.12
Indicates whether the node has been marked for garbage
collection (deletion from the topology database) upon the next
garbage collection cycle.

This object corresponds to cv4580, byte 7, bit 3.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.13
Indicates the node's level of support for high-performance
routing (HPR):

noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR base (option set 1400)
Enumeration
Enumerated Values:
1noHprSupport
2hprBaseOnly
3rtpTower
4controlFlowsOverRtpTower
.1.3.6.1.2.1.34.4.1.2.2.3.1.14
Indicates whether this node has peripheral border node
support.

This object corresponds to cv4580, byte 9, bit 0.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.15
Indicates whether this node has interchange node support.

This object corresponds to cv4580, byte 9, bit 1.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.16
Indicates whether this node has extended border node
support.

This object corresponds to cv4580, byte 9, bit 2.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.17
Indicates whether this node supports branch awareness.

This object corresponds to cv4580, byte 8, bit 4.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.3.1.18
.1.3.6.1.2.1.34.4.1.2.2.4 · 1 row entry · 27 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnNnTgTopologyFRTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnNnTgTopologyFRTable'
Portion of the APPN topology database that describes all of
the APPN transmissions groups between nodes in the database.
appnNnTgTopologyFREntry row .1.3.6.1.2.1.34.4.1.2.2.4.1
This table is indexed by four columns: FRSN, TG owner fully
qualified node name, TG destination fully qualified node name,
and TG number.
Column Syntax OID
Flow reduction sequence numbers (FRSNs) are associated with
Topology Database Updates (TDUs) and are unique only within
each APPN network node. A TDU can be associated with multiple
APPN resources. This FRSN indicates…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.2.2.4.1.1
Administratively assigned name for the originating node for
this TG. This is the same name specified in the node table.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.2.2.4.1.2
Administratively assigned fully qualified network name for the
destination node for this TG.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.2.2.4.1.3
Number associated with this transmission group. Range is
0-255.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.4
Number of days before deletion of this network node TG entry
if it is not operational or has an odd (inconsistent) RSN.
daysAppnTopologyEntryTimeLeft
Type Constraints:
range: 0..15
.1.3.6.1.2.1.34.4.1.2.2.4.1.5
Indicates whether the destination node is a virtual routing
node.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.6
DLC-specific data related to a link connection network.
AppnTgDlcData
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.2.2.4.1.7
Current owning node's resource sequence number for this
resource. An odd number indicates that information about the
resource is inconsistent.

This object corresponds to the numeric value in cv47, bytes
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.2.2.4.1.8
Indicates whether the transmission group is operational.

This object corresponds to cv47, byte 6, bit 0.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.9
Indicates whether the transmission group is quiescing.

If the TG owner is either an extended border node or a
branch-aware network node (indicated, respectively, by
the appnNnNodeFRExteBorderSup and appnN…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.10
Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to
differentiate support and status of CP-CP …
Enumeration
Enumerated Values:
1supportedUnknownStatus
2supportedActive
3notSupported
4supportedNotActive
.1.3.6.1.2.1.34.4.1.2.2.4.1.11
Effective capacity for this TG.
AppnTgEffectiveCapacity
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.2.2.4.1.12
Cost per connect time.

This is an administratively assigned value representing the
relative cost per unit of time to use this TG. Range is from

0, which means no cost, to 255, which indica…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.13
Cost per byte transmitted.

This is an administratively assigned value representing the
relative cost of transmitting a byte over this TG. Range is
from 0, which means no cost, to 255, which indicates max…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.14
Administratively assigned security level of this TG.

This object corresponds to cv47, byte 16.
AppnTgSecurity
Type Values:
1nonsecure
32publicSwitchedNetwork
64undergroundCable
96secureConduit
128guardedConduit
160encrypted
192guardedRadiation
.1.3.6.1.2.1.34.4.1.2.2.4.1.15
Administratively assigned delay associated with this TG.

This object corresponds to cv47, byte 17.
AppnTgDelay
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.2.2.4.1.16
First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.

This object corresponds to cv47, byte 19.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.17
Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.

This object corresponds to cv47, byte 20.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.18
Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.

This object corresponds to cv47, byte 21.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.2.2.4.1.19
Indicates whether the TG has been marked for garbage
collection (deletion from the topology database) upon the next
garbage collection cycle.

This object corresponds to cv47, byte 6, bit 1.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.20
The subarea number associated with this TG.

This object corresponds to cv4680, bytes m+2 through m+5.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.2.2.4.1.21
Indicates whether high performance routing (HPR)
is supported over this TG.

This object corresponds to cv4680, byte m+1, bit 2.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.22
Indicates whether the destination node supports
high performance routing (HPR) transport tower.

This object corresponds to cv4680, byte m+1, bit 7.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.23
Indicates the type of the TG.

This object corresponds to cv4680, byte m+1, bits 3-4.
Enumeration
Enumerated Values:
1unknown
2appnOrBfTg
3interchangeTg
4virtualRouteTg
.1.3.6.1.2.1.34.4.1.2.2.4.1.24
Indicates whether the transmission group is an intersubnet TG,
which defines a border between subnetworks.

This object corresponds to cv4680, byte m+1, bit 5.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.25
This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active.

This object co…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.26
Indicates whether the transmission group is a branch TG
(equivalently, whether the destination of the transmission
group is a branch network node).

This object corresponds to cv4680, byte m+1, bit 1.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.2.2.4.1.27
.1.3.6.1.2.1.34.4.1.3.1 · 1 row entry · 20 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnLocalTgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnLocalTgTable'
TG Table describes all of the TGs owned by this node.  The TG
destination can be a virtual node, network node, LEN node, or
end node.
appnLocalTgEntry row .1.3.6.1.2.1.34.4.1.3.1.1
This table is indexed by the destination CpName and the TG
number.
Column Syntax OID
Administratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.3.1.1.1
Number associated with this transmission group.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.2
Indicates whether the destination node for this TG is a
virtual routing node.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.1.1.3
DLC-specific data related to a link connection network.
AppnTgDlcData
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.3.1.1.4
Administratively assigned name for the local port associated
with this TG. A zero-length string indicates that this value
is unknown.
OctetString
Constraints:
range: 0-10
.1.3.6.1.2.1.34.4.1.3.1.1.5
Indicates whether the transmission group is quiescing.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.1.1.6
Indicates whether the transmission group is operational.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.1.1.7
Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to
differentiate support and status of CP-CP …
Enumeration
Enumerated Values:
1supportedUnknownStatus
2supportedActive
3notSupported
4supportedNotActive
.1.3.6.1.2.1.34.4.1.3.1.1.8
Effective capacity for this TG.
AppnTgEffectiveCapacity
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.3.1.1.9
Cost per connect time: a value representing the relative cost
per unit of time to use the TG. Range is from 0, which means
no cost, to 255.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.10
Relative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.11
Administratively assigned security level of this TG.
AppnTgSecurity
Type Values:
1nonsecure
32publicSwitchedNetwork
64undergroundCable
96secureConduit
128guardedConduit
160encrypted
192guardedRadiation
.1.3.6.1.2.1.34.4.1.3.1.1.12
Administratively assigned delay associated with this TG.
AppnTgDelay
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.3.1.1.13
First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.14
Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.15
Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.1.1.16
Indicates the level of high performance routing (HPR) support
over this TG :

noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR base (option set 1400)
Enumeration
Enumerated Values:
1noHprSupport
2hprBaseOnly
3rtpTower
4controlFlowsOverRtpTower
.1.3.6.1.2.1.34.4.1.3.1.1.17
Indicates whether the transmission group is an intersubnet TG,
which defines a border between subnetworks.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.1.1.18
This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.1.1.19
Branch link type of this TG:
other(1) = the agent has determined the TG's
branch link type to be a value other
than branch uplink or branch
Enumeration
Enumerated Values:
1other
2uplink
3downlink
4downlinkToBranchNetworkNode
5none
255unknown
.1.3.6.1.2.1.34.4.1.3.1.1.20
.1.3.6.1.2.1.34.4.1.3.2 · 1 row entry · 17 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnLocalEnTgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnLocalEnTgTable'
Table describing all of the TGs owned by the end nodes known
to this node via TG registration.  This node does not represent
its own view of the TG on behalf of the partner node in this
table.  The TG destination can be a virtual routing node,
network node, or end node.
appnLocalEnTgEntry row .1.3.6.1.2.1.34.4.1.3.2.1
This table requires multiple indexes to uniquely identify each
TG. They are originating CPname, destination CPname, and the
TG number.
Column Syntax OID
Administratively assigned name of the origin node for this
TG. This is a fully qualified network name.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.3.2.1.1
Administratively assigned name of the destination node for
this TG. This is the fully qualified name of a network node,
end node, LEN node, or virtual routing node.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.3.2.1.2
Number associated with this transmission group.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.3
Number of days before deletion of this end node TG entry.
daysAppnTopologyEntryTimeLeft
Type Constraints:
range: 0..15
.1.3.6.1.2.1.34.4.1.3.2.1.4
Indicates whether the destination node is a virtual routing
node.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.2.1.5
DLC-specific data related to a link connection network.
AppnTgDlcData
Type Constraints:
range: 0..64
.1.3.6.1.2.1.34.4.1.3.2.1.6
Indicates whether the transmission group is operational.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.2.1.7
Indicates whether CP-CP sessions are supported on this TG, and
whether the TG owner's contention-winner session is active on
this TG. Some nodes in the network are not able to

differentiate support and s…
Enumeration
Enumerated Values:
1supportedUnknownStatus
2supportedActive
3notSupported
4supportedNotActive
.1.3.6.1.2.1.34.4.1.3.2.1.8
Effective capacity for this TG.
AppnTgEffectiveCapacity
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.3.2.1.9
Cost per connect time: a value representing the relative cost
per unit of time to use the TG. Range is from 0, which means
no cost, to 255.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.10
Relative cost of transmitting a byte over this link.
Range is from 0, which means no cost, to 255.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.11
Administratively assigned security level of this TG.
AppnTgSecurity
Type Values:
1nonsecure
32publicSwitchedNetwork
64undergroundCable
96secureConduit
128guardedConduit
160encrypted
192guardedRadiation
.1.3.6.1.2.1.34.4.1.3.2.1.12
Administratively assigned delay associated with this TG.
AppnTgDelay
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.3.2.1.13
First user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.14
Second user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.15
Third user-defined TG characteristic for this TG. This is
an administratively assigned value associated with the TG.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.3.2.1.16
This object indicates whether the transmission group is a
multi-link TG. A TG that has been brought up as a multi-link
TG is reported as one, even if it currently has only one link
active.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.2.1.34.4.1.3.2.1.17

appnDirTable

table
.1.3.6.1.2.1.34.4.1.4.2 · 1 row entry · 6 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnDirTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnDirTable'
Table containing information about all known LUs.
appnDirEntry row .1.3.6.1.2.1.34.4.1.4.2.1
This table is indexed by the LU name.
Indexes
Column Syntax OID
Fully qualified network LU name in the domain of the
serving network node. Entries take one of three forms:

- Explicit entries do not contain the character '*'.
- Partial wildcard entries have the …
OctetString
Constraints:
range: 1-17
.1.3.6.1.2.1.34.4.1.4.2.1.1
Fully qualified control point (CP) name of the network node
server. For unassociated end node entries, a zero-length
string is returned.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.4.2.1.2
Fully qualified CP name of the node at which the LU is
located. This name is the same as the serving NN name when
the LU is located at a network node. It is also the same as
the fully qualified LU name when this is th…
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.4.2.1.3
Specifies the location of the LU with respect to the local
node.
Enumeration
Enumerated Values:
1local
2domain
3xdomain
.1.3.6.1.2.1.34.4.1.4.2.1.4
Directory types are:
1 - Home
The LU is in the domain of the local node, and the LU
information has been configured at the local node.

2 - Cache
The LU has previously been located by a b…
Enumeration
Enumerated Values:
1home
2cache
3registered
.1.3.6.1.2.1.34.4.1.4.2.1.5
Fully qualified CP name of the node at which the LU appears to
be located. This object and the appnDirLuOwnerName object are
related as follows:

Implementations that support this object save in their
dir…
OctetString
Constraints:
range: 3-17
range: 0-0
.1.3.6.1.2.1.34.4.1.4.2.1.6
.1.3.6.1.2.1.34.4.1.5.1 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnCosModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnCosModeTable'
Table representing all of the defined mode names for this
node.  The table contains the matching COS name for each
mode name.
appnCosModeEntry row .1.3.6.1.2.1.34.4.1.5.1.1
This table is indexed by the mode name.
Indexes
Column Syntax OID
Administratively assigned name for this mode.
SnaModeName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.5.1.1.1
Administratively assigned name for this class of service.
SnaClassOfServiceName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.5.1.1.2
.1.3.6.1.2.1.34.4.1.5.2 · 1 row entry · 2 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnCosNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnCosNameTable'
Table mapping all of the defined class-of-service names for
this node to their network transmission priorities.
appnCosNameEntry row .1.3.6.1.2.1.34.4.1.5.2.1
The COS name is the index to this table.
Indexes
Column Syntax OID
Administratively assigned name for this class of service.
SnaClassOfServiceName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.5.2.1.1
Transmission priority for this class of service:

low(1) - (X'01'): low priority
medium(2) - (X'02'): medium priority
high(3) - (X'03'): high priority
network(4) - (X'04'): network priority
Enumeration
Enumerated Values:
1low
2medium
3high
4network
.1.3.6.1.2.1.34.4.1.5.2.1.2
.1.3.6.1.2.1.34.4.1.5.3 · 1 row entry · 7 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnCosNodeRowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnCosNodeRowTable'
This table contains all node-row information for all classes
of service defined in this node.
appnCosNodeRowEntry row .1.3.6.1.2.1.34.4.1.5.3.1
A node entry for a given class of service.
Column Syntax OID
Administratively assigned name for this class of service.
SnaClassOfServiceName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.5.3.1.1
Subindex under appnCosNodeRowName, corresponding to a row in
the node table for the class of service identified in
appnCosNodeRowName.

For each class of service, this subindex orders rows in the
appnCosNo…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.3.1.2
Weight to be associated with the nodes that fit the criteria
specified by this node row.

This value can either be a character representation of an
integer, or a formula for calculating the weight.
OctetString
Constraints:
range: 1-64
.1.3.6.1.2.1.34.4.1.5.3.1.3
Minimum route addition resistance value for this node.

Range of values is 0-255. The lower the value, the more
desirable the node is for intermediate routing.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.3.1.4
Maximum route addition resistance value for this node.
Range of values is 0-255. The lower the value, the more
desirable the node is for intermediate routing.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.3.1.5
Indicates whether low congestion will be tolerated. This
object and appnCosNodeRowMaxCongestAllow together delineate a
range of acceptable congestion states for a node. For the
ordered pair (minimum congestion allowed…
Integer32
Constraints:
range: 0-1
.1.3.6.1.2.1.34.4.1.5.3.1.6
Indicates whether low congestion will be tolerated. This
object and appnCosNodeRowMinCongestAllow together delineate a
range of acceptable congestion states for a node. For the
ordered pair (minimum congestion allowed…
Integer32
Constraints:
range: 0-1
.1.3.6.1.2.1.34.4.1.5.3.1.7
.1.3.6.1.2.1.34.4.1.5.4 · 1 row entry · 19 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnCosTgRowTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnCosTgRowTable'
Table containing all the TG-row information for all classes of
service defined in this node.
appnCosTgRowEntry row .1.3.6.1.2.1.34.4.1.5.4.1
A TG entry for a given class of service.
Column Syntax OID
Administratively assigned name for this class of service.
SnaClassOfServiceName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.5.4.1.1
Subindex under appnCosTgRowName, corresponding to a row in the
TG table for the class of service identified in
appnCosTgRowName.

For each class of service, this subindex orders rows in the
appnCosTgRowTab…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.2
Weight to be associated with the TGs that fit the criteria
specified by this TG row.

This value can either be a character representation of an
integer, or a formula for calculating the weight.
OctetString
Constraints:
range: 1-64
.1.3.6.1.2.1.34.4.1.5.4.1.3
Minimum acceptable capacity for this class of service.
AppnTgEffectiveCapacity
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.5.4.1.4
Maximum acceptable capacity for this class of service.
AppnTgEffectiveCapacity
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.5.4.1.5
Minimum acceptable cost per connect time for this class of
service.

Cost per connect time: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no cost, t…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.6
Maximum acceptable cost per connect time for this class of
service.

Cost per connect time: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no cost, t…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.7
Minimum acceptable cost per byte transmitted for this class
of service.

Cost per byte transmitted: a value representing the relative
cost per unit of time to use this TG. Range is from 0, which
means no…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.8
Maximum acceptable cost per byte transmitted for this class
of service.

Cost per byte transmitted: a value representing the relative
cost of transmitting a byte over this TG. Range is from 0,
which mean…
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.9
Minimum acceptable security for this class of service.
AppnTgSecurity
Type Values:
1nonsecure
32publicSwitchedNetwork
64undergroundCable
96secureConduit
128guardedConduit
160encrypted
192guardedRadiation
.1.3.6.1.2.1.34.4.1.5.4.1.10
Maximum acceptable security for this class of service.
AppnTgSecurity
Type Values:
1nonsecure
32publicSwitchedNetwork
64undergroundCable
96secureConduit
128guardedConduit
160encrypted
192guardedRadiation
.1.3.6.1.2.1.34.4.1.5.4.1.11
Minimum acceptable propagation delay for this class of

service.
AppnTgDelay
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.5.4.1.12
Maximum acceptable propagation delay for this class of
service.
AppnTgDelay
Type Constraints:
range: 1
.1.3.6.1.2.1.34.4.1.5.4.1.13
Minimum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.14
Maximum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.15
Minimum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.16
Maximum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.17
Minimum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.18
Maximum acceptable value for this user-defined
characteristic.
Integer32
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.5.4.1.19
.1.3.6.1.2.1.34.4.1.6.2 · 1 row entry · 40 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnIsInTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnIsInTable'
Intermediate Session Information Table
appnIsInEntry row .1.3.6.1.2.1.34.4.1.6.2.1
Entry of Intermediate Session Information Table.
Column Syntax OID
The network-qualified control point name of the node at which
the session and PCID originated. For APPN and LEN nodes, this
is either CP name of the APPN node at which the origin LU is
located or the CP name of the NN …
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.6.2.1.1
The procedure correlation identifier (PCID) of a session. It
is an 8-byte value assigned by the primary LU.
OctetString
Constraints:
range: 8-8
.1.3.6.1.2.1.34.4.1.6.2.1.2
Indicates the state of the session:

inactive(1) - session is inactive
pendactive(2) - session is pending active
active(3) - session is active
pendinact(4) - session is pending inactive
Enumerationr/w
Enumerated Values:
1inactive
2pendactive
3active
4pendinact
.1.3.6.1.2.1.34.4.1.6.2.1.3
The primary LU name of the session. A zero-length
string indicates that this name is not available.
OctetString
Constraints:
range: 0-17
.1.3.6.1.2.1.34.4.1.6.2.1.4
The secondary LU name of the session. A zero-length
string indicates that this name is not available.
OctetString
Constraints:
range: 0-17
.1.3.6.1.2.1.34.4.1.6.2.1.5
The mode name used for this session.
SnaModeName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.6.2.1.6
The Class of Service (COS) name used for this session.
SnaClassOfServiceName
Type Constraints:
range: 0..8
.1.3.6.1.2.1.34.4.1.6.2.1.7
Transmission priority for this class of service. Values are:

low(1) - (X'01'): low priority
medium(2) - (X'02'): medium priority
high(3) - (X'03'): high priority
network(4) - (X'04'): network…
Enumeration
Enumerated Values:
1low
2medium
3high
4network
.1.3.6.1.2.1.34.4.1.6.2.1.8
The type of intermediate session. Defined values are

unknown The session type is not known.

lu62 A session between LUs of type 6.2
(as indicated by the LU type in…
Enumeration
Enumerated Values:
1unknown
2lu62
3lu0thru3
4lu62dlur
5lu0thru3dlur
.1.3.6.1.2.1.34.4.1.6.2.1.9
Length of time the session has been active, measured in
hundredths of a second.
hundredths of a secondSNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.10
Length of time the session counters have been active, measured
in hundredths of a second.
hundredths of a secondSNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.11
Number of function management data (FMD) path information
units (PIUs) sent from the Primary LU to the Secondary LU since
the counts were last activated.
path information units (PIUs)SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.12
Number of FMD PIUs sent from the Secondary LU to the Primary
LU since the counts were last activated.
path information units (PIUs)SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.13
Number of non-FMD PIUs sent from the Primary LU to the
Secondary LU since the counts were last activated.
path information units (PIUs)SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.14
Number of non-FMD PIUs sent from the Secondary LU to the
Primary LU since the counts were last activated.
path information units (PIUs)SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.15
Number of FMD bytes sent from the Primary LU to the Secondary
LU since the counts were last activated.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.16
Number of FMD bytes sent from the Secondary LU to the Primary
LU since the counts were last activated.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.17
Number of non-FMD bytes sent from the Primary LU to the
Secondary LU since the counts were last activated.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.18
Number of non-FMD bytes sent from the Secondary LU to the
Primary LU since the counts were last activated.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.19
The primary stage adjacent CP name of this session. If the
session stage traverses an RTP connection, the CP name of the
remote RTP endpoint is returned.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.6.2.1.20
The primary stage adjacent transmission group (TG) number
associated with this session. If the session stage traverses
an RTP connection, the value 256 is returned.

Values between 257 and 300 are availab…
Integer32
Constraints:
range: 0-300
.1.3.6.1.2.1.34.4.1.6.2.1.21
The primary stage maximum basic transmission unit (BTU) size
for sending data.
bytesInteger32
Constraints:
range: 99-32767
.1.3.6.1.2.1.34.4.1.6.2.1.22
The primary stage type of pacing being used for sending data.
Enumeration
Enumerated Values:
1fixed
2adaptive
.1.3.6.1.2.1.34.4.1.6.2.1.23
The primary stage send residual pace count. This represents
the primary stage number of message units (MUs) that can still
be sent in the current session window.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.24
The primary stage size of the next window which will be used
to send data.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.25
The primary stage type of pacing being used for receiving
data.
Enumeration
Enumerated Values:
1fixed
2adaptive
.1.3.6.1.2.1.34.4.1.6.2.1.26
The primary stage receive residual pace count. This
represents the primary stage number of message units (MUs) that
can still be received in the current session window.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.27
The primary stage size of the next window which will be used
to receive data.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.28
The secondary stage adjacent CP name of this session. If the
session stage traverses an RTP connection, the CP name of the
remote RTP endpoint is returned.
SnaControlPointName
Type Constraints:
range: 3..17
.1.3.6.1.2.1.34.4.1.6.2.1.29
The secondary stage adjacent transmission group (TG) number
associated with this session. If the session stage traverses
an RTP connection, the value 256 is returned.

Values between 257 and 300 are avail…
Integer32
Constraints:
range: 0-300
.1.3.6.1.2.1.34.4.1.6.2.1.30
The secondary stage maximum basic transmission unit (BTU) size
for sending data.
bytesInteger32
Constraints:
range: 99-32767
.1.3.6.1.2.1.34.4.1.6.2.1.31
The secondary stage type of pacing being used for sending
data.
Enumeration
Enumerated Values:
1fixed
2adaptive
.1.3.6.1.2.1.34.4.1.6.2.1.32
The secondary stage send residual pace count. This represents
the secondary stage number of message units (MUs) that can
still be sent in the current session window.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.33
The secondary stage size of the next window which will be used
to send data.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.34
The secondary stage type of pacing being used for receiving
data.
Enumeration
Enumerated Values:
1fixed
2adaptive
.1.3.6.1.2.1.34.4.1.6.2.1.35
The secondary stage receive residual pace count. This
represents the secondary stage number of message units (MUs)
that can still be received in the current session window.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.36
The secondary stage size of the next window which will be used
to receive data.
message units (MUs)SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.2.1.37
The route selection control vector (RSCV X'2B') used for this
session. It is present for APPN nodes; but is not present for
LEN nodes. The format of this vector is described in SNA
Formats. If no RSCV is available, a…
OctetString
Constraints:
range: 0-255
.1.3.6.1.2.1.34.4.1.6.2.1.38
The HPR local Network Connection Endpoint of the session.
OctetString
Constraints:
range: 1-8
.1.3.6.1.2.1.34.4.1.6.2.1.39
The RTP connection local TCID of the session.
OctetString
Constraints:
range: 8-8
.1.3.6.1.2.1.34.4.1.6.2.1.40
.1.3.6.1.2.1.34.4.1.6.3 · 1 row entry · 3 columns
Uses the rfc variant from /opt/observium/mibs/rfc.
Command help
Walk appnIsRtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'APPN-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'APPN-MIB::appnIsRtpTable'
A table indicating how many ISR sessions are transported by
each RTP connection.
appnIsRtpEntry row .1.3.6.1.2.1.34.4.1.6.3.1
Entry of Intermediate Session RTP Table.
Column Syntax OID
The local Network Connection Endpoint of the RTP connection.
OctetString
Constraints:
range: 1-8
.1.3.6.1.2.1.34.4.1.6.3.1.1
The local TCID of the RTP connection.
OctetString
Constraints:
range: 8-8
.1.3.6.1.2.1.34.4.1.6.3.1.2
The number of intermediate sessions using this RTP
connection.
sessionsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.2.1.34.4.1.6.3.1.3