appnLsStatusXidBitInError
APPN-MIB ·
.1.3.6.1.2.1.34.4.1.1.5.2.1.13
Object
column
Integer32
This object identifies the actual bit in error (0 through 7)
within the errored byte of the XID. The value 8 indicates that
this object has no meaning.
For values in the range 0-7, this object corresponds to byte 4
of the XID Negotiation (X'22') control vector.
Context
- MIB
- APPN-MIB
- OID
.1.3.6.1.2.1.34.4.1.1.5.2.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- appnLsStatusEntry
- Table
- appnLsStatusTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-8
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| appnLsStatusIndex Table index. The value of the index begins at zero
and is incremented up to a maximum value of 2**31-1
(2,147,483,647) before wrapping. | column | Integer32 | .1.3.6.1.2.1.34.4.1.1.5.2.1.1 |
| appnLsStatusXidLocalSense The sense data associated with the rejection of the XID.
This is the sense data that came from the local node (this
node) when it built the XID Negotiation Error co… | column | SnaSenseData | .1.3.6.1.2.1.34.4.1.1.5.2.1.10 |
| appnLsStatusXidRemoteSense The sense data the adjacent node returned to this node
indicating the reason the XID was rejected.
This is the sense data that came from the remote node in the
XID … | column | SnaSenseData | .1.3.6.1.2.1.34.4.1.1.5.2.1.11 |
| appnLsStatusXidByteInError This object identifies the actual byte in the XID that caused
the error. The value 65536 indicates that the object has no
meaning.
For values in the range 0-65535,… | column | Integer32 | .1.3.6.1.2.1.34.4.1.1.5.2.1.12 |
| appnLsStatusDlcType The type of DLC interface, distinguished according to the
protocol immediately 'below' this layer. | column | IANAifType-MIBIANAifType | .1.3.6.1.2.1.34.4.1.1.5.2.1.14 |
| appnLsStatusLocalAddr Local address of this link station. | column | DisplayableDlcAddress | .1.3.6.1.2.1.34.4.1.1.5.2.1.15 |
| appnLsStatusRemoteAddr Address of the remote link station on this link. | column | DisplayableDlcAddress | .1.3.6.1.2.1.34.4.1.1.5.2.1.16 |
| appnLsStatusTime Time when the exception condition occurred. This time can be
used to identify when this event occurred in relation to other
events in the APPN node, for example, the time at whic… | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.34.4.1.1.5.2.1.2 |
| appnLsStatusLsName Administratively assigned name for the link station
experiencing the condition. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.2.1.3 |
| appnLsStatusCpName Fully qualified name of the adjacent node for this link
station. An adjacent node is identified using the format
specified in the SnaControlPointName textual convention.
… | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.2.1.4 |
| appnLsStatusPartnerId The partner's Node Identification, from bytes 2-5 of the XID
received from the partner. If this value is not available,
then the characters '00000000' are returned. | column | SnaNodeIdentification | .1.3.6.1.2.1.34.4.1.1.5.2.1.5 |
| appnLsStatusTgNum Number associated with the TG to this link station, with a
range from 0 to 256. A value of 256 indicates that the TG
number was unknown at the time of the failure. | column | Integer32 | .1.3.6.1.2.1.34.4.1.1.5.2.1.6 |
| appnLsStatusGeneralSense The error sense data associated with the start sequence of
activation of a link up to the beginning of the XID sequence.
This is the sense data that came from Confi… | column | SnaSenseData | .1.3.6.1.2.1.34.4.1.1.5.2.1.7 |
| appnLsStatusRetry Indicates whether the node will retry the start request to
activate the link. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.2.1.8 |
| appnLsStatusEndSense The sense data associated with the termination of the link
connection to adjacent node.
This is the sense data that came from the DLC layer. | column | SnaSenseData | .1.3.6.1.2.1.34.4.1.1.5.2.1.9 |