appnLsTgNum
APPN-MIB ·
.1.3.6.1.2.1.34.4.1.1.5.1.1.9
Object
column
Integer32
Number associated with the TG to this link station, with a range from 0 to 256. A value of 256 indicates that the TG number has not been negotiated and is unknown at this time.
Context
- MIB
- APPN-MIB
- OID
.1.3.6.1.2.1.34.4.1.1.5.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- appnLsEntry
- Table
- appnLsTable
- Siblings
- 44
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-256
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| appnLsName Administratively assigned name for the link station.
The name can be from one to ten characters. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.1 |
| appnLsLimResource Indicates whether the link station is a limited resource. A
link station that is a limited resource is deactivated when it
is no longer in use. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.10 |
| appnLsActOnDemand Indicates whether the link station is activatable on demand.
Such a link station is reported in the topology as active
regardless of its actual state, so that it ca… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.11 |
| appnLsMigration Indicates whether this link station will be used for
connections to down-level or migration partners.
In general, migration nodes do not append their CP names on
XI… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.12 |
| appnLsPartnerNodeId The partner's Node Identification, from bytes 2-5 of the XID
received from the partner. If this value is not available,
then the characters '00000000' are returned. | column | SnaNodeIdentification | .1.3.6.1.2.1.34.4.1.1.5.1.1.13 |
| appnLsCpCpSessionSupport Indicates whether CP-CP sessions are supported by this
link station. For a dynamic link, this object represents
the default ('Admin') value. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.14 |
| appnLsMaxSendBtuSize Numeric value between 99 and 32767 inclusive indicating the
maximum number of bytes in a Basic Transmission Unit (BTU) sent
on this link.
When the link state (retur… | column | bytes Integer32 | .1.3.6.1.2.1.34.4.1.1.5.1.1.15 |
| appnLsInXidBytes Number of XID bytes received. All of the bytes in the SNA
basic transmission unit (BTU), i.e., all of the bytes in the
DLC XID Information Field, are counted. | column | bytes AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.16 |
| appnLsInMsgBytes Number of message (I-frame) bytes received. All of the bytes
in the SNA basic transmission unit (BTU), including the
transmission header (TH), are counted. | column | bytes AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.17 |
| appnLsInXidFrames Number of XID frames received. | column | XID frames AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.18 |
| appnLsInMsgFrames Number of message (I-frame) frames received. | column | I-frames AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.19 |
| appnLsCommand Object by which a Management Station can activate, deactivate,
or recycle (i.e., cause to be deactivated and then immediately
reactivated) a link station, by setting the value to
… | column | Enumeration | .1.3.6.1.2.1.34.4.1.1.5.1.1.2 |
| appnLsOutXidBytes Number of XID bytes sent. All of the bytes in the SNA basic
transmission unit (BTU), i.e., all of the bytes in the DLC XID
Information Field, are counted. | column | bytes AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.20 |
| appnLsOutMsgBytes Number of message (I-frame) bytes sent. All of the bytes
in the SNA basic transmission unit (BTU), including the
transmission header (TH), are counted. | column | bytes AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.21 |
| appnLsOutXidFrames Number of XID frames sent. | column | XID frames AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.22 |
| appnLsOutMsgFrames Number of message (I-frame) frames sent. | column | I-frames AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.23 |
| appnLsEchoRsps Number of echo responses returned from adjacent link station.
A response should be returned for each test frame sent by this
node. Test frames are sent to adjacent nodes periodic… | column | echo responses AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.24 |
| appnLsCurrentDelay The time that it took for the last test signal to be sent and
returned from this link station to the adjacent link station.
This time is represented in milliseconds. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.4.1.1.5.1.1.25 |
| appnLsMaxDelay The longest time it took for a test signal to be sent and
returned from this link station to the adjacent link station.
This time is represented in milliseconds .
… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.4.1.1.5.1.1.26 |
| appnLsMinDelay The shortest time it took for a test signal to be sent and
returned from this link station to the adjacent link station.
This time is represented in milliseconds.
T… | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.4.1.1.5.1.1.27 |
| appnLsMaxDelayTime The time when the longest delay occurred. This time can be
used to identify when this high water mark occurred in relation
to other events in the APPN node, for example, the time… | column | SNMPv2-TCDateAndTime | .1.3.6.1.2.1.34.4.1.1.5.1.1.28 |
| appnLsGoodXids The total number of successful XID exchanges that have
occurred on this link station since the time it was started. | column | XID exchanges AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.29 |
| appnLsOperState State of this link station. The comments map these more
granular states to the 'traditional' four states for SNA
resources. Values (2) through (5) represent the normal
progressi… | column | Enumeration | .1.3.6.1.2.1.34.4.1.1.5.1.1.3 |
| appnLsBadXids The total number of unsuccessful XID exchanges that have
occurred on this link station since the time it was started. | column | XID exchanges AppnLinkStationCounter | .1.3.6.1.2.1.34.4.1.1.5.1.1.30 |
| appnLsSpecific Identifies the object, e.g., one in a DLC-specific MIB, that
can provide additional information related to this link
station.
If the agent is unable to identify suc… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.34.4.1.1.5.1.1.31 |
| appnLsActiveTime The cumulative amount of time since the node was last
reinitialized, measured in hundredths of a second, that this
link station has been in the active state. A zero value
indicat… | column | hundredths of a second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.4.1.1.5.1.1.32 |
| appnLsCurrentStateTime The amount of time, measured in hundredths of a second, that
the link station has been in its current state. | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.34.4.1.1.5.1.1.33 |
| appnLsHprSup Indicates the level of high performance routing (HPR) support
over this link:
noHprSupport(1) - no HPR support
hprBaseOnly(2) - HPR b… | column | Enumeration | .1.3.6.1.2.1.34.4.1.1.5.1.1.34 |
| appnLsErrRecoSup Indicates whether the link station is supporting
HPR link-level error recovery. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.35 |
| appnLsForAnrLabel The forward Automatic Network Routing (ANR) label for this
link station. If the link does not support HPR or the value is
unknown, a zero-length string is returned. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.36 |
| appnLsRevAnrLabel The reverse Automatic Network Routing (ANR) label for this
link station. If the link does not support HPR or the value is
unknown, a zero-length string is returned. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.37 |
| appnLsCpCpNceId The network connection endpoint identifier (NCE ID) for CP-CP
sessions if this node supports the HPR transport tower, a
zero-length string if the value is unknown or not meaningfu… | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.38 |
| appnLsRouteNceId The network connection endpoint identifier (NCE ID) for Route
Setup if this node supports the HPR transport tower, a zero-
length string if the value is unknown or not meaningful … | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.39 |
| appnLsPortName Administratively assigned name for the port associated with
this link station. The name can be from one to ten
characters. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.4 |
| appnLsBfNceId The network connection endpoint identifier (NCE ID) for the
APPN/HPR boundary function if this node supports the HPR
transport tower, a zero-length string if the value is unknown
… | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.40 |
| appnLsLocalAddr Local address of this link station. | column | DisplayableDlcAddress | .1.3.6.1.2.1.34.4.1.1.5.1.1.41 |
| appnLsRemoteAddr Address of the remote link station on this link. | column | DisplayableDlcAddress | .1.3.6.1.2.1.34.4.1.1.5.1.1.42 |
| appnLsRemoteLsName Remote link station discovered from the XID exchange.
The name can be from one to ten characters. A zero-length
string indicates that the value is not known. | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.43 |
| appnLsCounterDisconTime The value of the sysUpTime object the last time the link
station was started. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.4.1.1.5.1.1.44 |
| appnLsMltgMember Indicates whether the link is a member of a multi-link TG. If
the link's TG has been brought up as a multi-link TG, then the
link is reported as a member of a multi-link TG, even… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.45 |
| appnLsDlcType The type of DLC interface, distinguished according to the
protocol immediately 'below' this layer. | column | IANAifType-MIBIANAifType | .1.3.6.1.2.1.34.4.1.1.5.1.1.5 |
| appnLsDynamic Identifies whether this is a dynamic link station. Dynamic
link stations are created when links that have not been locally
defined are established by adjacent nodes. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.34.4.1.1.5.1.1.6 |
| appnLsAdjCpName Fully qualified name of the adjacent node for this link
station. An adjacent node is identified using the format
specified in the SnaControlPointName textual convention.
… | column | OctetString | .1.3.6.1.2.1.34.4.1.1.5.1.1.7 |
| appnLsAdjNodeType Node type of the adjacent node on this link:
networkNode(1) - APPN network node
endNode(2) - APPN end node
t21len(4) - LEN end node
unknown(255) - the ag… | column | Enumeration | .1.3.6.1.2.1.34.4.1.1.5.1.1.8 |