ALCATEL-IND1-VLAN-MGR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
39

vlanTable

table
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1 · 1 row entry · 29 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk vlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-VLAN-MGR-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-VLAN-MGR-MIB::vlanTable' 
A list of Virtual LAN instances in this device.
vlanEntry row .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1
A VLAN entry.
Indexes
Column Syntax OID
vlanNumber
The VLAN number identifying this instance. Valid
range from 1 to 4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.1
vlanDescription
Textual description of the VLAN instance.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.2
vlanAdmStatus
The administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, delete(3) will detach and
delete the ports/r…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.3
vlanOperStatus
Provide operating status of a particular VLAN environment.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.4
vlanStatus
Row status to control creation/deletion of vlans.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.5
vlanStpStatus
Indicates status of spanning tree for the current VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.6
vlanAuthentStatus
Indicates status of authentication for the current VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.7
vlanVoiceStatus
Indicates status of voice usage for the current VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.8
vlanIpAddress
IP address of the VLAN's virtual router port.
Note: a vlan does not necessarily have an ip address.
Setting one requires that the ip address be set, and optionally the
following since they have defaults: ip mask, ip e…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.9
vlanIpMask
Subnetwork mask for VLAN IP Address.
Default is class level mask for the ip address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.10
vlanIpEncap
VLAN's IP router port encapsulation.
Not applicable when there is no ip router port.
Enumerationr/w
Enumerated Values:
1ethernet2
2snap
3notApplicable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.11
vlanIpForward
VLAN's IP router port ip frame forwarding (disabled = ip host only).
Not applicable when there is no ip router port.
Enumerationr/w
Enumerated Values:
1enable
2disable
3notApplicable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.12
vlanIpStatus
Provides ability to add and remove the VLAN ip address.
Enumerationr/w
Enumerated Values:
1add
2delete
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.13
vlanIpxNet
IPX network address.
Note: a vlan does not necessarily have an ipx net number.
Setting one requires that the ipx net be set, and optionally the
ipx encap, ipx rip-sap mode, and delay ticks (all have defaults).
Then the…
IpxNetworkAddressr/w .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.14
vlanIpxEncap
IPX of frame enapsulation of IPX VLAN router port.
Not applicable when there is no ipx router port.
Enumerationr/w
Enumerated Values:
1ethernet2
2novellraw
3llc
4snap
5notApplicable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.15
vlanIpxRipSapMode
IPX advertisement mode.
Not applicable when there is no ipx router port.
Enumerationr/w
Enumerated Values:
1riponly
2ripsap
3triggered
4inactive
5notApplicable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.16
vlanIpxDelayTicks
Tick metric to use for supporting IPX routing decisions.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.17
vlanIpxStatus
Provides ability to add and remove the VLAN ipx network node.
Enumerationr/w
Enumerated Values:
1add
2delete
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.18
vlanTagMobilePortStatus
When enabled for a VLAN, a mobile port will be moved to the
VLAN based on the tag.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.19
vlanPortMacStatus
When enabled for a VLAN, it will be considered a special VLAN not
affected by the ordinary vlan commands except the command to
delete a VLAN
Enumeration
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.20
vlanLocalProxyArp
When enabled for a VLAN, local proxy ARP processing happens on this=
VLAN.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.21
vlanMtu
Maximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 1280 to 9198.
Integer32r/w
Constraints:
range: 1280-9198
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.22
vlan1x1StpStatus
Indicates status of 1x1 spanning tree for the current VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.23
vlanflatStpStatus
Indicates status of flat spanning tree for the current VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.24
vlanHABandwidth
Bandwidth of flood queue allocated by Q-driver for High Availability
vlans. The value ranges from 1 to 50 Mega bits per second.
Integer32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.25
vlanSvlanTrafficType
The created SVLAN is desired for carrying customer or
provider traffic, default is customer. When creating
standard Vlans the value should be notApplicable
Enumerationr/w
Enumerated Values:
0notApplicable
1customer
2provider
3multicastEnterprise
4multicastVlanStacking
6eServiceCustomer
7eServiceManagement
8eServiceMulticastVlanStacking
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.26
vlanSvlanPriority
All traffic getting mapped to this Svlan should be either
priority mapped or mapped to a specific priority 0-7, default
is priority 0. For standard Vlans the value should be -1
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.27
vlanMacLearningControlStatus
Status of Mac Learning on a vlan
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.28
vlanSvlanMacTunnelStatus
Status of whether MAC Tunneling is enabled on this S-VLAN.
Default Value is disable.
This value will only take precedence when the value of the
Object alaEServiceL2MacTunnel is DISABLED
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.29

vpaTable

table
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk vpaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-VLAN-MGR-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-VLAN-MGR-MIB::vpaTable' 
A list of Virtual LAN instances in this device.
vpaEntry row .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1
A VLAN-Port Association (VPA) entry.
Indexes
Column Syntax OID
vpaVlanNumber
The VLAN number component of this instance. Valid
range from 1 to 4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.1
vpaIfIndex
The ifIndex component of this instance.
Unsigned32r/w
Constraints:
range: 1001-4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.2
vpaType
The type of this vpa. Two are statically configured:
configured default VPA and qTagged VPA. The mirrored
is an internal type set for mirrored ports and the
rest are dynamic vlan's

1. cfgDefault - Defaul…
Enumeration
Enumerated Values:
1cfgDefault
2qTagged
3mobile
4mirrored
6svlan
7dynamic
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.3
vpaState
The state of this vpa:
1. inactive - link down
2. blocking - link up, forwarding down
3. forwarding - link up, forwarding up, sources learned normally
4. filtering - link up, forwarding up, sources filtered.
Enumeration
Enumerated Values:
1inactive
2blocking
3forwarding
4filtering
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.4
vpaStatus
This is used to create or delete staticPrimary VPAs (default vlans
on a port ). Creation replaces the existing staticPrimary VPA
while deletion replaces the existing VPA so that the vlan number
is 1 for the given port.…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.5
vpaPortMacType
Value of this field will decide whether the port represented by vpaIfIndex is a ingress port or egress port. This fiels is applicable only for portMac vlans
Enumerationr/w
Enumerated Values:
1ingress
2egress
3inapplicable
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.2.1.1.6

vlanHAPortTable

table
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk vlanHAPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-VLAN-MGR-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-VLAN-MGR-MIB::vlanHAPortTable' 
A list of Port To HA vlan binding.
vlanHAPortEntry row .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1.1
Port To HA vlan binding entry.
Indexes
Column Syntax OID
vlanHAPortVlanId
The vlan Id in which this port is a HA port
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1.1.1
vlanHAPortIfIndex
This port is associated with a HA vlan.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1.1.2
vlanHAPortType
Value of this field will decide whether the port represented by vlanHAPortIfIndex is a ingress port or egress port.
Enumerationr/w
Enumerated Values:
1ingress
2egress
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1.1.3
vlanHAPortRowStatus
This indicate whether to add or delete the ifIndex
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.4.1.1.4