vlanIpAddress

ALCATEL-IND1-VLAN-MGR-MIB · .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.9
MIB view Table view

Object

column r/w SNMPv2-SMIIpAddress 
IP address of the VLAN's virtual router port.
Note:  a vlan does not necessarily have an ip address.
Setting one requires that the ip address be set, and optionally the
following since they have defaults:  ip mask, ip encap, ip forward.
Then setting vlanIpStatus to add will create the ip router port
for the given vlan (the index).

Context

MIB
ALCATEL-IND1-VLAN-MGR-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.9
Type
column
Access
readwrite
Status
current
Parent
vlanEntry
Table
vlanTable
Siblings
28

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
vlanNumber
The VLAN number identifying this instance. Valid range from 1 to 4094.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.1
vlanIpMask
Subnetwork mask for VLAN IP Address. Default is class level mask for the ip address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.10
vlanIpEncap
VLAN's IP router port encapsulation. Not applicable when there is no ip router port.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.11
vlanIpForward
VLAN's IP router port ip frame forwarding (disabled = ip host only). Not applicable when there is no ip router port.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.12
vlanIpStatus
Provides ability to add and remove the VLAN ip address.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.13
vlanIpxNet
IPX network address. Note: a vlan does not necessarily have an ipx net number. Setting one requires that the ipx net be set, and optionally the ipx encap, ipx rip-sap mode, and d…
columnIpxNetworkAddress.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.14
vlanIpxEncap
IPX of frame enapsulation of IPX VLAN router port. Not applicable when there is no ipx router port.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.15
vlanIpxRipSapMode
IPX advertisement mode. Not applicable when there is no ipx router port.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.16
vlanIpxDelayTicks
Tick metric to use for supporting IPX routing decisions.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.17
vlanIpxStatus
Provides ability to add and remove the VLAN ipx network node.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.18
vlanTagMobilePortStatus
When enabled for a VLAN, a mobile port will be moved to the VLAN based on the tag.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.19
vlanDescription
Textual description of the VLAN instance.
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.2
vlanPortMacStatus
When enabled for a VLAN, it will be considered a special VLAN not affected by the ordinary vlan commands except the command to delete a VLAN
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.20
vlanLocalProxyArp
When enabled for a VLAN, local proxy ARP processing happens on this= VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.21
vlanMtu
Maximum transmission unit i.e. the maximum size of packet that this vlan can handle. It ranges from 1280 to 9198.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.22
vlan1x1StpStatus
Indicates status of 1x1 spanning tree for the current VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.23
vlanflatStpStatus
Indicates status of flat spanning tree for the current VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.24
vlanHABandwidth
Bandwidth of flood queue allocated by Q-driver for High Availability vlans. The value ranges from 1 to 50 Mega bits per second.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.25
vlanSvlanTrafficType
The created SVLAN is desired for carrying customer or provider traffic, default is customer. When creating standard Vlans the value should be notApplicable
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.26
vlanSvlanPriority
All traffic getting mapped to this Svlan should be either priority mapped or mapped to a specific priority 0-7, default is priority 0. For standard Vlans the value should be -1
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.27
vlanMacLearningControlStatus
Status of Mac Learning on a vlan
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.28
vlanSvlanMacTunnelStatus
Status of whether MAC Tunneling is enabled on this S-VLAN. Default Value is disable. This value will only take precedence when the value of the Object alaEServiceL2MacTunnel is …
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.29
vlanAdmStatus
The administrative status which can be set by configuration. Disable(1) will disable ALL vports that are connected to this VLAN, enable(2) will enable ALL ports on this VLAN, dele…
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.3
vlanOperStatus
Provide operating status of a particular VLAN environment.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.4
vlanStatus
Row status to control creation/deletion of vlans.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.5
vlanStpStatus
Indicates status of spanning tree for the current VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.6
vlanAuthentStatus
Indicates status of authentication for the current VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.7
vlanVoiceStatus
Indicates status of voice usage for the current VLAN.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.8