vlanIpxNet
ALCATEL-IND1-VLAN-MGR-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.14
Object
column
r/w
IpxNetworkAddress
IPX network address. Note: a vlan does not necessarily have an ipx net number. Setting one requires that the ipx net be set, and optionally the ipx encap, ipx rip-sap mode, and delay ticks (all have defaults). Then the vlanIpxStatus should be set to add to create the ipx router port.
Context
- MIB
- ALCATEL-IND1-VLAN-MGR-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vlanEntry
- Table
- vlanTable
- Siblings
- 28
Syntax
IpxNetworkAddress
- Source
- IpxNetworkAddress
- Base type
Unsigned32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vlanNumber The VLAN number identifying this instance. Valid
range from 1 to 4094. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.1 |
| vlanIpMask Subnetwork mask for VLAN IP Address.
Default is class level mask for the ip address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.10 |
| vlanIpEncap VLAN's IP router port encapsulation.
Not applicable when there is no ip router port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.11 |
| vlanIpForward VLAN's IP router port ip frame forwarding (disabled = ip host only).
Not applicable when there is no ip router port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.12 |
| vlanIpStatus Provides ability to add and remove the VLAN ip address. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.13 |
| vlanIpxEncap IPX of frame enapsulation of IPX VLAN router port.
Not applicable when there is no ipx router port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.15 |
| vlanIpxRipSapMode IPX advertisement mode.
Not applicable when there is no ipx router port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.16 |
| vlanIpxDelayTicks Tick metric to use for supporting IPX routing decisions. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.17 |
| vlanIpxStatus Provides ability to add and remove the VLAN ipx network node. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.18 |
| vlanTagMobilePortStatus When enabled for a VLAN, a mobile port will be moved to the
VLAN based on the tag. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.19 |
| vlanDescription Textual description of the VLAN instance. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.2 |
| vlanPortMacStatus When enabled for a VLAN, it will be considered a special VLAN not
affected by the ordinary vlan commands except the command to
delete a VLAN | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.20 |
| vlanLocalProxyArp When enabled for a VLAN, local proxy ARP processing happens on this=
VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.21 |
| vlanMtu Maximum transmission unit i.e. the maximum size of packet that this
vlan can handle. It ranges from 1280 to 9198. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.22 |
| vlan1x1StpStatus Indicates status of 1x1 spanning tree for the current VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.23 |
| vlanflatStpStatus Indicates status of flat spanning tree for the current VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.24 |
| vlanHABandwidth Bandwidth of flood queue allocated by Q-driver for High Availability
vlans. The value ranges from 1 to 50 Mega bits per second. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.25 |
| vlanSvlanTrafficType The created SVLAN is desired for carrying customer or
provider traffic, default is customer. When creating
standard Vlans the value should be notApplicable | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.26 |
| vlanSvlanPriority All traffic getting mapped to this Svlan should be either
priority mapped or mapped to a specific priority 0-7, default
is priority 0. For standard Vlans the value should be -1 | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.27 |
| vlanMacLearningControlStatus Status of Mac Learning on a vlan | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.28 |
| vlanSvlanMacTunnelStatus Status of whether MAC Tunneling is enabled on this S-VLAN.
Default Value is disable.
This value will only take precedence when the value of the
Object alaEServiceL2MacTunnel is … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.29 |
| vlanAdmStatus The administrative status which can be set by
configuration. Disable(1) will disable ALL vports
that are connected to this VLAN, enable(2) will enable
ALL ports on this VLAN, dele… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.3 |
| vlanOperStatus Provide operating status of a particular VLAN environment. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.4 |
| vlanStatus Row status to control creation/deletion of vlans. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.5 |
| vlanStpStatus Indicates status of spanning tree for the current VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.6 |
| vlanAuthentStatus Indicates status of authentication for the current VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.7 |
| vlanVoiceStatus Indicates status of voice usage for the current VLAN. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.8 |
| vlanIpAddress IP address of the VLAN's virtual router port.
Note: a vlan does not necessarily have an ip address.
Setting one requires that the ip address be set, and optionally the
following … | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.3.1.1.1.1.1.9 |