ALCATEL-IND1-IPV6-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
91

alaIPv6InterfaceTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2 · 1 row entry · 22 columns
Open in standard view 
Table allowing the creation and removal of IPv6
interfaces.
          
The table is indexed by ipv6IfIndex.  The value of
ipv6IfIndex shall be a four byte value in one of 
the following formats:
          
 0x0000vvvv - The interface for VLAN vvvv
  0x0100tttt - The interface for tunnel tttt
  0x02000001 - The IPv6 loopback interface
          
The loopback interface configuration cannot be 
modified.
alaIPv6InterfaceEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1
An IPv6 interface entry.
Indexes
IPV6-MIBipv6IfIndex
Column Syntax OID
alaIPv6InterfaceRowStatus
Used to control the addition and removal of IPv6
interfaces.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.1
alaIPv6InterfaceDescription
The IPv6 interface's description.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.2
alaIPv6InterfaceMtu
The IPv6 interface's maximum transmission unit.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.3
alaIPv6InterfaceType
The interface type.
Enumeration
Enumerated Values:
1other
2vlan
3tunnel
4loopback
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.4
alaIPv6InterfaceAdminStatus
Interface administrative status.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.5
alaIPv6InterfaceSendRouterAdvertisements
Specify whether the router sends periodic router
advertisements and responds to router solicitations
on the interface.

The default value for most interfaces is enable(1).
Some interface types (e.g. 6to4 t…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.6
alaIPv6InterfaceMaxRtrAdvInterval
The maximum time allowed between sending unsolicited
multicast router advertisements from the interface.
secondsUnsigned32r/w
Constraints:
range: 4-1800
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.7
alaIPv6InterfaceAdvManagedFlag
The TRUE/FALSE value to be placed in the 'Managed
address configuration' flag field in router advertisements.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.8
alaIPv6InterfaceAdvOtherConfigFlag
The TRUE/FALSE value to be placed in the 'Other stateful
configuration' flag field in router advertisements.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.9
alaIPv6InterfaceAdvReachableTime
The value to be placed in the Reachable Time field in
the router advertisements sent over this interface. The
value zero means unspecified by this router.
millisecondsUnsigned32r/w
Constraints:
range: 0-3600000
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.10
alaIPv6InterfaceAdvRetransTimer
The value to be placed in the Retrans Timer field in
the router advertisements sent over this interface. The
value zero means unspecified by this router.
millisecondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.11
alaIPv6InterfaceAdvDefaultLifetime
The value to be placed in the Router Lifetime field in
the router advertisements sent over this interface.

The value MUST be either zero, 1, or between
alaIPv6InterfaceMaxRtrAdvInterval and 9000 seconds…
secondsUnsigned32r/w
Constraints:
range: 0-9000
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.12
alaIPv6InterfaceName
The mandatory user-assigned name for the interface.

Since the loopback interface is created without user
interaction, the name 'loopback' will be automatically
assigned.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.13
alaIPv6InterfaceAdvSendMtu
The TRUE/FALSE value that determines whether the MTU
option is sent in Router Advertisements.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.14
alaIPv6InterfaceReachableTime
In the absence of any reachability notification, the
amount of time a neighbor reached via this interface
will remain in the reachable state before transitioning
to the stale state. Computed to be between .5 and 1.5
t…
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.15
alaIPv6InterfaceBaseReachableTime
The base value used to compute the reachable time
for neighbors reached via this interface. See
alaIPv6InterfaceReachableTime above.
secondsUnsigned32r/w
Constraints:
range: 10-3600
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.16
alaIPv6InterfaceMinRtrAdvInterval
The minimum time allowed between sending unsolicited
multicast router advertisements from the interface.

The time must be a minimum of 3 seconds and no more than
.75 times the value of alaIPv6InterfaceMax…
secondsUnsigned32r/w
Constraints:
range: 0-1350
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.17
alaIPv6InterfaceClockSkew
Router Advertisement decrementing timers must be consistent
in all Advertisements on the link. The clock skew accounts
for link propogation delays and poorly synchronized clocks.
secondsUnsigned32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.18
alaIPv6InterfaceRetransTimer
The amount of time to wait before retransmitting a Neighbor
Solicitation during neighbor discovery.
millisecondsUnsigned32r/w
Constraints:
range: 1000-30000
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.19
alaIPv6InterfaceDADTransmits
The number of Neighbor Solicitations to send during Duplicate
Address Detection.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.20
alaIPv6InterfaceAdvHopLimit
The value placed in the current hop limit field of router
advertisements.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.21
alaIPv6InterfaceDADEnable
The TRUE/FALSE value determines whether DAD
has to be performed or not.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.2.1.22

alaIPv6ConfigTunnelTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2 · 1 row entry · 2 columns
Open in standard view 
Table for IPv6 configured tunnels.  This table contains the
tunnel-specific information extending the corresponding
tunnel interface entry in alaIPv6InterfaceTable.
alaIPv6ConfigTunnelEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1
A entry contains the objects for an IPv6 configured tunnel.
Indexes
IPV6-MIBipv6IfIndex
Column Syntax OID
alaIPv6ConfigTunnelV4Source
The source IPv4 address for the tunnel.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1.1
alaIPv6ConfigTunnelV4Dest
The destination IPv4 address for the tunnel.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.3.2.1.2

alaIPv6InterfaceAddressTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4 · 1 row entry · 5 columns
Open in standard view 
Table allowing the creation and removal of IPv6
addresses assigned to interfaces.
alaIPv6InterfaceAddressEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1
An IPv6 interface address entry.

The same link-local address may be assigned to
multiple interfaces. A global address may only
be assigned to a single interface.
Indexes
IPV6-MIBipv6IfIndex alaIPv6InterfaceAddress
Column Syntax OID
alaIPv6InterfaceAddressRowStatus
Used to control the addition and removal of IPv6
interface addresses.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.1
alaIPv6InterfaceAddress
An IPv6 address (or prefix for EUI-64 addresses)
assigned to the interface.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.2
alaIPv6InterfaceAddressPrefixLength
The number of bits that are significant in the IPv6
address' prefix.
Unsigned32r/w
Constraints:
range: 3-128
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.3
alaIPv6InterfaceAddressAnycastFlag
This object has the value 'true(1)', if this
address is an anycast address and the value
'false(2)' otherwise.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.4
alaIPv6InterfaceAddressDADStatus
The status of duplicate address detection for this address.
The only value that may be set via SNMP is 'check' when the
current status is 'duplicate'. In such cases, duplicate
address detection will be performed again …
Enumerationr/w
Enumerated Values:
0unknown
1pending
2duplicate
3passed
4check
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.4.1.5

alaIPv6InterfaceEUI64AddressTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5 · 1 row entry · 4 columns
Open in standard view 
Table allowing the creation and removal of IPv6
addresses formed by appending an EUI-64 interface 
identifier to the specified prefix.
          
This table is mainly used for the creation of such
addresses.  After creation they can be managed
via the alaIPv6InterfaceAddressTable.
alaIPv6InterfaceEUI64AddressEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1
An IPv6 interface EUI-64 address entry.
Indexes
IPV6-MIBipv6IfIndex alaIPv6InterfaceEUI64AddressPrefix
Column Syntax OID
alaIPv6InterfaceEUI64AddressRowStatus
Used to control the addition and removal of IPv6
interface EUI-64 addresses.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.1
alaIPv6InterfaceEUI64AddressPrefix
The prefix for the EUI-64 address.
AlaIPv6AddressPrefix
Textual Convention: AlaIPv6AddressPrefix OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.2
alaIPv6InterfaceEUI64AddressPrefixLength
The number of bits that are significant in the IPv6
address' prefix.
Unsigned32r/w
Constraints:
range: 3-64
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.3
alaIPv6InterfaceEUI64AddressIdentifier
The interface's EUI-64 identifier which is combined
with the prefix to form the IPv6 address.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.5.1.4

alaIPv6NeighborTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6 · 1 row entry · 10 columns
Open in standard view 
The IPv6 neighbor table.  Much of this information is 
available in the RFC-2465 ipv6NetToMediaTable.  However,
that table does not allow the static configuration of
neighbor entries (all objects except for 
ipv6NetToMediaValid are read-only).
alaIPv6NeighborEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1
Each entry contains one IPv6 address to `physical'
address equivalence (a neighbor).
Indexes
IPV6-MIBipv6IfIndex alaIPv6NeighborNetAddress
Column Syntax OID
alaIPv6NeighborNetAddress
The neighbor's IPv6 Address.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.1
alaIPv6NeighborPhysAddress
The neighbor's media-dependent `physical' address.
SNMPv2-TCPhysAddressr/w
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.2
alaIPv6NeighborSlot
The slot used to reach the neighbor. When creating a static neighbor
the slot must be specified. On read, a value of zero indicates
the slot is not known/not applicable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.3
alaIPv6NeighborPort
The port used to reach the neighbor. When creating a static neighbor
the port must be specified. On read, a value of zero indicates the
port is not known/not applicable.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.4
alaIPv6NeighborType
The type of the mapping. The 'dynamic(2)' type
indicates that the IPv6 address to physical
addresses mapping has been dynamically
resolved using the IPv6 Neighbor Discovery
protocol. The static(3)' types indicates that
…
Enumeration
Enumerated Values:
1other
2dynamic
3static
4local
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.5
alaIPv6NeighborState deprecated
The Neighbor Unreachability Detection state
for the interface when the address mapping in
this entry is used.
Enumeration
Enumerated Values:
1reachable
2stale
3delay
4probe
5invalid
6unknown
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.6
alaIPv6NeighborLastUpdated
The value of sysUpTime at the time this entry
was last updated. If this entry was updated prior
to the last re-initialization of the local network
management subsystem, then this object contains
a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.7
alaIPv6NeighborRowStatus
Used to control the addition and removal of static
entries in the neighbor table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.8
alaIPv6NeighborLifetime
The remaining time the neighbor will stay in its current
state. External events may cause a state change before
the expiry of this lifetime. A value of zero indicates
the neighbor will remain in its current state inde…
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.9
alaIPv6NeighborReachability
The reachability status of the neighbor.
Enumeration
Enumerated Values:
1confirmed
2unconfirmed
3incomplete
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.6.1.10

alaIPv6StaticRouteTable

table obsolete
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7 · 1 row entry · 6 columns
Open in standard view 
This table has been superseded by alaIprmV6StaticRouteTable in
ALCATEL-IND1-IPRMV6-MIB.
          
Table allowing the creation and removal of static
IPv6 routes.
alaIPv6StaticRouteEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1
A static route entry.
Indexes
alaIPv6StaticRouteDest alaIPv6StaticRoutePfxLength
Column Syntax OID
alaIPv6StaticRouteDest obsolete
The destination IPv6 address of this static
route. This object may not take a Multicast
address value.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.1
alaIPv6StaticRoutePfxLength obsolete
Indicates the prefix length of the destination
address.
Integer32
Constraints:
range: 0-128
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.2
alaIPv6StaticRouteIfIndex obsolete
If the next hop address is a link-local
address, this is the ipv6IfIndex value of the
interface over which the destination is reached.
For all other next hop address types the value
is zero.
IPV6-TCIpv6IfIndexOrZeror/w
Textual Convention: IPV6-TCIpv6IfIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.3
alaIPv6StaticRouteNextHop obsolete
The IPv6 address of the next hop towards the
destination.
IPV6-TCIpv6Addressr/w
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.4
alaIPv6StaticRouteMetric obsolete
The routing metric for this route. The lower the
value, the higher the priority for the static
route.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.5
alaIPv6StaticRouteRowStatus obsolete
Used to control the addition and removal of static
routes.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.7.1.6

alaIPv6HostTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8 · 1 row entry · 3 columns
Open in standard view 
Local table mapping host names to IPv6 addresses. This provides
the equivalent of /etc/hosts for IPv6.
alaIPv6HostEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1
A entry maps a host name to an IPv6 address.
Indexes
alaIPv6HostName alaIPv6HostAddress
Column Syntax OID
alaIPv6HostName
A host name to be mapped to an IPv6 address.
OctetString
Constraints:
range: 1-64
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.1
alaIPv6HostAddress
The IPv6 address mapped to the host name.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.2
alaIPv6HostRowStatus
Allows host name/IPv6 address mappings to be created and
deleted in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.8.1.3

alaIPv6InterfacePrefixTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9 · 1 row entry · 12 columns
Open in standard view 
Table allowing the creation and removal of IPv6
prefixes to be placed in Prefix Information
options in Router Advertisement messages sent
from the interface.
          
Default: all prefixes that the router advertises
via routing protocols as being on-link for the
interface from which the advertisement is sent.
The link-local prefix is not included in the
list of advertised prefixes.
alaIPv6InterfacePrefixEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1
An IPv6 interface prefix entry.
Indexes
IPV6-MIBipv6IfIndex alaIPv6InterfacePrefix alaIPv6InterfacePrefixLength
Column Syntax OID
alaIPv6InterfacePrefixRowStatus
Used to control the addition and removal of IPv6
interface prefixes for Router ADvertisement messages.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.1
alaIPv6InterfacePrefix
The prefix associated with this interface.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.2
alaIPv6InterfacePrefixLength
The length of the prefix in bits.
Unsigned32
Constraints:
range: 1-127
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.3
alaIPv6InterfacePrefixValidLifetime
The value to be placed in the Valid
Lifetime in the Prefix Information
option, in seconds. The designated value
of 4,294,967,295 represents infinity.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.4
alaIPv6InterfacePrefixOnLinkFlag
The value to be placed in the on-link
flag (L-bit) field in the Prefix
Information option.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.5
alaIPv6InterfacePrefixPreferredLifetime
The value to be placed in the Preferred
Lifetime in the Prefix Information
option, in seconds. The designated value
of 4,294,967,295 represents infinity.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.6
alaIPv6InterfacePrefixAutonomousFlag
The value to be placed in the Autonomous
Flag field in the Prefix Information
option.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.7
alaIPv6InterfacePrefixSource
The source of this prefix. If configured by
management the value will be configured(3). If
determined automatically from IPv6 interface
address configuration the value will be
dynamic(2).
Enumeration
Enumerated Values:
1other
2dynamic
3configured
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.8
alaIPv6InterfacePrefixValidLifetimeDecrement
If true, use the remaining seconds derived from
alaIPv6InterfacePrefixValidLifetime in the
Router Advertisement. If false, use the static value
alaIPv6InterfacePrefixValidLifetime.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.9
alaIPv6InterfacePrefixValidLifetimeExpire
The date and time when the advertised prefix Valid Lifetime
expires. To use this value,
alaIPv6InterfaceValidLifetimeDecrement must be set to true.
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.10
alaIPv6InterfacePrefixPreferredLifetimeDecrement
If true, use the remaining seconds derived from
alaIPv6InterfacePrefixPreferredLifetime in the
Router Advertisement. If false, use the static value
alaIPv6InterfacePrefixPreferredLifetime.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.11
alaIPv6InterfacePrefixPreferredLifetimeExpire
The date and time when the advertised prefix Preferred Lifetime
expires. To use this value,
alaIPv6InterfacePreferredLifetimeDecrement must be set to true.
SNMPv2-TCDateAndTimer/w
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.9.1.12

alaIPv6PMTUTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10 · 1 row entry · 5 columns
Open in standard view 
Table allowing the retrieval of the known IPv6
path MTU value.
alaIPv6PMTUEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1
An IPv6 path MTU entry.
Indexes
alaIPv6PMTUDest
Column Syntax OID
alaIPv6PMTUDest
The destination address of the IPv6 path.
IPV6-TCIpv6Address
Textual Convention: IPV6-TCIpv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.1
alaIPv6PMTU
The path's MTU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.2
alaIPv6PMTUExpire
The minimum time remaining before the PMTU entry is
removed from the table.
minutesSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.3
alaIPv6PMTUHits
The number of times the path MTU entry has been used.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.4
alaIPv6PMTUUpdates
The number of times the path MTU entry has been updated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.10.1.5

alaIPv6RouteFlagsTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11 · 1 row entry · 7 columns
Open in standard view 
Table allowing the retrieval of the flags for
IPv6 route entries.
alaIPv6RouteFlagsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1
An IPV6 route flags entry.
Indexes
No indexes recorded
Column Syntax OID
alaIPv6RouteFlagsUp
True if the Up (U) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.1
alaIPv6RouteFlagsGateway
True if the Gateway (G) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.2
alaIPv6RouteFlagsHost
True if the Host (H) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.3
alaIPv6RouteFlagsStatic
True if the Static (S) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.4
alaIPv6RouteFlagsCloneable
True if the Cloneable (C) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.5
alaIPv6RouteFlagsDiscard
True if the Discard/Blackhole (B) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.6
alaIPv6RouteFlagsECMP
True if the ECMP (E) flag is set on the route.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.11.1.7

alaIPv6LocalUnicastTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13 · 1 row entry · 6 columns
Open in standard view 
Table allowing the creation and removal of local IPv6
unicast addresses (RFC 4193) on an interface.
alaIPv6LocalUnicastEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1
An local unicast IPv6 address entry.
Indexes
IPV6-MIBipv6IfIndex alaIPv6LocalUnicastGlobalID alaIPv6LocalUnicastSubnetID alaIPv6LocalUnicastInterfaceID
Column Syntax OID
alaIPv6LocalUnicastGlobalID
The global ID portion of the local IPv6 unicast address. Leave
the value as all zero when adding a new addres to use the
alaIPv6GlobalID value.
OctetString
Constraints:
range: 5-5
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.1
alaIPv6LocalUnicastSubnetID
The subnet ID portion of the local IPv6 unicast address.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.2
alaIPv6LocalUnicastInterfaceID
The interface identifier portion of the local IPv6 unicast
address. When alaIPv6LocalUnicastEUI64 is true(1) the value
of this object should be all zero.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.3
alaIPv6LocalUnicastPrefixLength
The number of bits that are significant in the IPv6
address prefix.
Unsigned32r/w
Constraints:
range: 64-128
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.4
alaIPv6LocalUnicastEUI64
If true(1) the interface identifier is formed from an
automatically generated EUI-64 value.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.5
alaIPv6LocalUnicastRowStatus
Used to control the addition and removal of local IPv6
unicast addresses.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.13.1.6

alaIpv6RafVlanTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14 · 1 row entry · 3 columns
Open in standard view 
A table that contains the IPV6 RAF Vlans
alaIpv6RafVlanEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1
The list of VLANs for which RAF is enabled
Indexes
alaIpv6RafVlan
Column Syntax OID
alaIpv6RafVlan
The VLAN ID for which RAF is enabled.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.1
alaIpv6RafVlanRowStatus
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.2
alaIpv6RafVlanActiveStatus
The TRUE/FALSE value to specify the status of RA-Filter.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.14.1.3

alaIpv6RafPortTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15 · 1 row entry · 4 columns
Open in standard view 
A table that contains the IPV6 RAF ports ports for a vlan
alaIpv6RafPortEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1
The list of ports of VLAN for which RAF is enabled
Indexes
alaIpv6RafPortVlan alaIpv6RafPortIfIndex
Column Syntax OID
alaIpv6RafPortVlan
The VLAN ID for which RAF is enabled.
Unsigned32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.1
alaIpv6RafPortIfIndex
The IfIndex of this UNI Port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.2
alaIpv6RafPortRowStatus
The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a trusted port from vlan
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.3
alaIpv6RafPortActiveStatus
The TRUE/FALSE value to specify the status of RA-Filter Port.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.15.1.4

alaIpv6RafCounterStatsTable

table
.1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16 · 1 row entry · 2 columns
Open in standard view 
A table that contains the IPV6 RAF Counter statistics
alaIpv6RafCounterStatsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1
The list of NI's for which RAF counter statistics is displayed
Indexes
alaIpv6RafNi
Column Syntax OID
alaIpv6RafNi
The NI for which RAF is enabled and is UP.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1.1
alaIpv6RafUntrustedPktCnt
The Untrusted packets count for Ra-filter enabled NI's.
Unsigned32
Constraints:
range: 0-4000000000
 .1.3.6.1.4.1.6486.800.1.2.1.29.1.1.16.1.2