ALCATEL-IND1-BFD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
38

alaBfdIntfTable

table
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBfdIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BFD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BFD-MIB::alaBfdIntfTable' 
The BFD Interface Table describes confiuration done over the
BFD interfaces.
alaBfdIntfEntry row .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1
The BFD interface Entry describes BFD interface.
Indexes
Column Syntax OID
alaBfdIntfAddrType
This object specifies IP address type values
unknown(0), ipv4(1) or ipv6(2) have to be
supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.1
alaBfdIntfAddr
The address of the BFD interface configured
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.2
alaBfdIntfIndex
The Interface Index of the BFD interface
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.3
alabfdIntfAdminStatus
This object specifies the adminstatus of the
BFD interface.
AlaBfdStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.4
alaBfdIntfDesiredMinTxInterval
The object specifies the Desired Tx interval at
which BFD packets should be transmitted at
interface level. Default interval is global
configured interval
AlaBfdIntervalr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.5
alaBfdIntfReqMinRxInterval
The object specifies the Min Rx interval at
which BFD packets should be transmitted at
interface level.Default interval is global
configured interval
AlaBfdIntervalr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.6
alaBfdIntfOperMode
The object specifies the operation mode at
interface level. Default mode is global mode
Enumerationr/w
Enumerated Values:
1asyncMode
2demandMode
3echoOnly
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.7
alaBfdIntfEchoMode
The object specifies status of echo mode at
interface level.
AlaBfdStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.8
alaBfdIntfReqMinEchoRxInterval
The object specifies the Echo Rx interval at
which BFD packets should be transmitted at
interface level. Default interval is global
configured interval
AlaBfdIntervalr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.9
alaBfdIntfDetectMult
The object specifies the Detect multiplier at
interface level.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.10
alaBfdIntfsesstype
The type of this BFD session corresponding to
this interface. Currently single hop supported
Enumerationr/w
Enumerated Values:
1singleHop
2multiHop
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.11
alaBfdIntfAuthPresFlag
This object indicates that the local system's
desire to use Authentication. Specifically, it
is set to true(1) if the local system wishes the
session to be authenticated or false(0) if not
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.12
alaBfdIntfAuthenticationType
The Authentication Type used for this BFD
session. This field is valid only when the
Authentication Present bit is set
Enumerationr/w
Enumerated Values:
1none
2simplePassword
3keyedMD5
4meticulousKeyedMD5
5keyedSHA1
6meticulousKeyedSHA1
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.13
alaBfdIntfL2HoldTimer
The object configures layer 2 convergence
timer
AlaBfdIntervalr/w
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.14
alaBfdIntfRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.3.1.15

alaBfdSessTable

table
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4 · 1 row entry · 15 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BFD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BFD-MIB::alaBfdSessTable' 
The BFD Session Table describes the BFD sessions.
alaBfdSessEntry row .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1
The BFD Session Entry describes BFD session.
Indexes
Column Syntax OID
alaBfdSessDiscriminator
This object specifies the local discriminator
for this BFD session, used to uniquely identify it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.1
alaBfdSessNeighborAddrType
This object specifies IP address type values
unknown(0), ipv4(1) or ipv6(2) have to be
supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.2
alaBfdSessNeighborAddr
This object specifies the neighbor IpAddress.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.3
alaBfdSessRemoteDiscr
This object specifies the local discriminator
for this BFD session, used to uniquely identify
it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.4
alaBfdSessUdpPort
The destination UDP Port for BFD. The default
value is the well-known value for this port.
INET-ADDRESS-MIBInetPortNumber
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.5
alaBfdSessState
The perceived state of the BFD session.BFD
State failing(5) is only applicable if this BFD
session is running version 0.
Enumeration
Enumerated Values:
1adminDown
2down
3init
4up
5failing
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.6
alaBfdSessRemoteHeardFlag
This object specifies status of BFD packet
reception from the remote system. Specifically,
it is set to true(1) if the local system is
actively receiving BFD packets from the remote
system, and is set to false(0) if the…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.7
alaBfdSessDiag
A diagnostic code specifying the local system's
reason for the last transition of the session
from up(4)to some other state.
AlaBfdDiag
Type Values:
1noDiagnostic
2controlDetectionTimeExpired
3echoFunctionFailed
4neighborSignaledSessionDown
5forwardingPlaneReset
6pathDown
7concatenatedPathDown
8administrativelyDown
9reverseConcatenatedPathDown
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.8
alaBfdSessOperMode
This object specifies current operating mode
that BFD session is operating in.
A value of AsyncMode(1) ...
A value of DemandMode(2) ...
Enumeration
Enumerated Values:
1asyncMode
2demandMode
3echoOnly
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.9
alaBfdSessEchoFuncModeDesiredFlag
This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.10
alaBfdSessControlPlanIndepFlag
This object indicates that the local system's
ability to continue to function through a
disruption of the control plane. Specifically,
it is set to true(1) if the local system BFD
implementation independent of the cont…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.11
alaBfdSessInterface
This object contains an interface index used
to indicate the interface which this BFD
session is running on. This value can be zero
if there are no interface associated
with this BFD session
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.12
alaBfdSessNegotiatedTxInterval
This object specifies the minimum interval, in
milliseconds, that the local system will
transmit BFD Control packets.
AlaBfdInterval
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.13
alaBfdSessNegotiatedRxInterval
This object specifies the minimum interval, in
milliseconds, that the local system will
Receive BFD Control packets.
AlaBfdInterval
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.14
alaBfdSessProtocols
BFD Protocol status: Bits 0 - 3
bit 0 - OSPF enabled/disabled
bit 1 - BGP enabled/disabled
bit 2 - DVMRP enabled/disabled
bit 3 - VRRP enabled/disabled
bit 4 - IPRM enabled/disabled
Bits
Enumerated Values:
0ospf
1bgp
2dvmrp
3vrrp
4iprm
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.15

alaBfdSessPerfTable

table
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5 · 1 row entry · 8 columns
Open in standard view
Uses the alcatel variant from /opt/observium/mibs/alcatel.
Command help
Walk alaBfdSessPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-IND1-BFD-MIB' -M '/opt/observium/mibs/alcatel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-IND1-BFD-MIB::alaBfdSessPerfTable' 
This table specifies BFD Session performance counters.
alaBfdSessPerfEntry row .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1
An entry in this table is created by a BFD-enabled node
for every BFD Session. bfdCounterDiscontinuityTime is
used to indicate potential discontinuity for all counter
objects in this table.
Indexes
No indexes recorded
Column Syntax OID
alaBfdSessPerfPktIn
The total number of BFD messages received for this BFD
session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.1
alaBfdSessPerfPktOut
The total number of BFD messages sent for this BFD
session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.2
alaBfdSessPerfEchoOut
The total number of BFD Echo messages sent for this BFD
session.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.3
alaBfdSessPerfUpTime
The value of sysUpTime on the most recent occasion at
which the session came up. If no such up event exists
this object contains a zero value.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.4
alaBfdSessPerfLastSessDownTime
The value of sysUpTime on the most recent occasion at
which the last time communication was lost with the
neighbor. If no such down event exist this object
contains a zero value.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.5
alaBfdSessPerfLastCommLostDiag
The BFD diag code for the last time communication was
lost with the neighbor. If no such down event exists
this object contains a zero value.
AlaBfdDiag
Type Values:
1noDiagnostic
2controlDetectionTimeExpired
3echoFunctionFailed
4neighborSignaledSessionDown
5forwardingPlaneReset
6pathDown
7concatenatedPathDown
8administrativelyDown
9reverseConcatenatedPathDown
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.6
alaBfdSessPerfSessUpCount
The number of times this session has gone into the Up
state since the router last rebooted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.7
alaBfdSessPerfDiscTime
The value of sysUpTime on the most recent occasion at
which any one or more of the session counters suffered
a discontinuity.The relevant counters are the specific
instances associated with this BFD session of any
Count…
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.5.1.8