alaBfdSessNeighborAddrType
ALCATEL-IND1-BFD-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.2
Object
column
INET-ADDRESS-MIBInetAddressType
This object specifies IP address type values unknown(0), ipv4(1) or ipv6(2) have to be supported.
Context
- MIB
- ALCATEL-IND1-BFD-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alaBfdSessEntry
- Table
- alaBfdSessTable
- Siblings
- 14
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaBfdSessDiscriminator This object specifies the local discriminator
for this BFD session, used to uniquely identify it. | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.1 |
| alaBfdSessEchoFuncModeDesiredFlag This object indicates that the local system's
desire to use Echo mode. Specifically, it is set
to true(1) if the local system wishes to use
Echo mode or false(0) if not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.10 |
| alaBfdSessControlPlanIndepFlag This object indicates that the local system's
ability to continue to function through a
disruption of the control plane. Specifically,
it is set to true(1) if the local system BF… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.11 |
| alaBfdSessInterface This object contains an interface index used
to indicate the interface which this BFD
session is running on. This value can be zero
if there are no interface associated
with this … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.12 |
| alaBfdSessNegotiatedTxInterval This object specifies the minimum interval, in
milliseconds, that the local system will
transmit BFD Control packets. | column | AlaBfdInterval | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.13 |
| alaBfdSessNegotiatedRxInterval This object specifies the minimum interval, in
milliseconds, that the local system will
Receive BFD Control packets. | column | AlaBfdInterval | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.14 |
| alaBfdSessProtocols BFD Protocol status: Bits 0 - 3
bit 0 - OSPF enabled/disabled
bit 1 - BGP enabled/disabled
bit 2 - DVMRP enabled/disabled
bit 3 - VRRP enabled/disabled
bit 4 - IPRM enabled/dis… | column | Bits | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.15 |
| alaBfdSessNeighborAddr This object specifies the neighbor IpAddress. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.3 |
| alaBfdSessRemoteDiscr This object specifies the local discriminator
for this BFD session, used to uniquely identify
it. | column | Unsigned32 | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.4 |
| alaBfdSessUdpPort The destination UDP Port for BFD. The default
value is the well-known value for this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.5 |
| alaBfdSessState The perceived state of the BFD session.BFD
State failing(5) is only applicable if this BFD
session is running version 0. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.6 |
| alaBfdSessRemoteHeardFlag This object specifies status of BFD packet
reception from the remote system. Specifically,
it is set to true(1) if the local system is
actively receiving BFD packets from the remo… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.7 |
| alaBfdSessDiag A diagnostic code specifying the local system's
reason for the last transition of the session
from up(4)to some other state. | column | AlaBfdDiag | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.8 |
| alaBfdSessOperMode This object specifies current operating mode
that BFD session is operating in.
A value of AsyncMode(1) ...
A value of DemandMode(2) ... | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.9 |