alaBfdSessControlPlanIndepFlag

ALCATEL-IND1-BFD-MIB · .1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.11
MIB view Table view

Object

column SNMPv2-TCTruthValue 
This object indicates that the local system's
ability to continue to function through a
disruption of the control plane. Specifically,
it is set  to true(1) if the local system BFD
implementation independent of the control plane.
Otherwise, the value is set to false(0)

Context

MIB
ALCATEL-IND1-BFD-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.11
Type
column
Access
readonly
Status
current
Parent
alaBfdSessEntry
Table
alaBfdSessTable
Siblings
14

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaBfdSessDiscriminator
This object specifies the local discriminator for this BFD session, used to uniquely identify it.
columnUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.1
alaBfdSessEchoFuncModeDesiredFlag
This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(0) if not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.10
alaBfdSessInterface
This object contains an interface index used to indicate the interface which this BFD session is running on. This value can be zero if there are no interface associated with this …
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.12
alaBfdSessNegotiatedTxInterval
This object specifies the minimum interval, in milliseconds, that the local system will transmit BFD Control packets.
columnAlaBfdInterval.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.13
alaBfdSessNegotiatedRxInterval
This object specifies the minimum interval, in milliseconds, that the local system will Receive BFD Control packets.
columnAlaBfdInterval.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.14
alaBfdSessProtocols
BFD Protocol status: Bits 0 - 3 bit 0 - OSPF enabled/disabled bit 1 - BGP enabled/disabled bit 2 - DVMRP enabled/disabled bit 3 - VRRP enabled/disabled bit 4 - IPRM enabled/dis…
columnBits.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.15
alaBfdSessNeighborAddrType
This object specifies IP address type values unknown(0), ipv4(1) or ipv6(2) have to be supported.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.2
alaBfdSessNeighborAddr
This object specifies the neighbor IpAddress.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.3
alaBfdSessRemoteDiscr
This object specifies the local discriminator for this BFD session, used to uniquely identify it.
columnUnsigned32.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.4
alaBfdSessUdpPort
The destination UDP Port for BFD. The default value is the well-known value for this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.5
alaBfdSessState
The perceived state of the BFD session.BFD State failing(5) is only applicable if this BFD session is running version 0.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.6
alaBfdSessRemoteHeardFlag
This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remo…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.7
alaBfdSessDiag
A diagnostic code specifying the local system's reason for the last transition of the session from up(4)to some other state.
columnAlaBfdDiag.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.8
alaBfdSessOperMode
This object specifies current operating mode that BFD session is operating in. A value of AsyncMode(1) ... A value of DemandMode(2) ...
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.45.1.1.4.1.9