ALCATEL-ENT1-TIMETRA-QOS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
32
Rows
32
Columns
355
tDSCPNameTable
table.1.3.6.1.4.1.6527.3.1.2.16.1.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tDSCPNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tDSCPNameTable'
A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
Information about a particular DSCP Name, particularly
the DSCP value. It maps a DSCP Name into a DSCP value.
Some default entries are created by the agent.
Default entries have tDSCPNameStorageType permane…
the DSCP value. It maps a DSCP Name into a DSCP value.
Some default entries are created by the agent.
Default entries have tDSCPNameStorageType permane…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The name assigned to the DSCP Value.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPName Type Constraints: range: 1..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1 |
||||||||||||
|
Row Status of the entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2 |
||||||||||||
|
The storage type of this row in the table.
|
SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … |
.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3 |
||||||||||||
|
The DSCP Value.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPValuer/w Type Constraints: range: 0..63Description: The value of a Differential Services Code Point. |
.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4 |
||||||||||||
|
timestamp of last change to this row in tDSCPNameTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5 |
tFCNameTable
table.1.3.6.1.4.1.6527.3.1.2.16.2.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFCNameTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tFCNameTable'
A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
Information about a particular Forwarding Class Name, particularly
the Forwarding Class value.
Some default entries are created by the agent.
Default entries have tFCStorageType permanent,
and can not be de…
the Forwarding Class value.
Some default entries are created by the agent.
Default entries have tFCStorageType permanent,
and can not be de…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Forwarding class name.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFCName Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1 |
||||||||||||
|
Row Status of the entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2 |
||||||||||||
|
The storage type of this row in the table.
|
SNMPv2-TCStorageTyper/w Type Values:
Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is … |
.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3 |
||||||||||||
|
FC Value.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4 |
||||||||||||
|
timestamp of last change to this row in tFCNameTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5 |
tSapIngressTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.1
·
1 row entry
·
8 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressTable'
Information about a particular Sap Ingress Policy.
sap-ingress policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default En…
sap-ingress policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default En…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
the policy ID is the index to this table.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTSapIngressPolicyID Constraints: range: 1-65535Description: The identification number of a SAP ingress policy. |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1 |
||||||||||||
|
Row Status for the policy. The deletion of this row has
an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2 |
||||||||||||
|
Scope of the policy. If the scope is 'exclusive', it can only be
instantiated once whereas it could have multiple instances if defined as 'exclusive'. |
TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3 |
||||||||||||
|
user-provided description of the policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4 |
||||||||||||
|
tSapIngressDefaultFC specifies the forwarding class or the
sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. … |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemr/w Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5 |
||||||||||||
|
the priority to assign to traffic ingressing as the default
action queue. |
TPriorityr/w Type Values:
Description: the priority to apply to a packet |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6 |
||||||||||||
|
indicates which type of match criteria the policy should use.
when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for… |
TMatchCriteria Type Values:
Description: determines whether the entry matches traffic using IP match entries or MAC match entries. |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7 |
||||||||||||
|
timestamp of last change to this row in tSapIngressTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8 |
tSapIngressQueueTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.2
·
1 row entry
·
22 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressQueueTable'
information about all sap-ingress policies' queues.
Information about a particular queue for a sap-ingress policy.
Queue (1) is the used as a default for unicast and queue (11) is
used as a default for multicast. Both these are created by the
agent and can b…
Queue (1) is the used as a default for unicast and queue (11) is
used as a default for multicast. Both these are created by the
agent and can b…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The queue ID is used as the secondary index to the table entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueId Constraints: range: 1-32Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIn… |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1 |
||||||||||||
|
Row Status of the entry. This allows creation/deletion of rows in this
table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2 |
||||||||||||
|
The scheduler to which this queue would be feeding to.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
|
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4 |
||||||||||||
|
The weight that needs to be used by the scheduler to which this queue
would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for the above CIR traffic. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6 |
||||||||||||
|
The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7 |
||||||||||||
|
This object specifies if this is a multicast queue or not.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8 |
||||||||||||
|
tSapIngressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9 |
||||||||||||
|
The amount of reserved buffer space (in kilo bytes) for the queue.
|
TBurstSizer/w Type Constraints: range: -1..131072Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10 |
||||||||||||
|
The maximum amount of buffer space (in kilo bytes) allowed for the
queue. |
TBurstSizer/w Type Constraints: range: -1..131072Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11 |
||||||||||||
|
The percentage of buffer space for the queue, used
exclusively by high priority packets. |
TBurstPercentOrDefaultr/w Type Constraints: range: -1..100Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12 |
||||||||||||
|
The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13 |
||||||||||||
|
The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14 |
||||||||||||
|
The administrative PIR specified by the user.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w Type Constraints: range: -1range: 1..100000000Description: The PIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15 |
||||||||||||
|
The administrative CIR specified by the user.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w Type Constraints: range: -1..100000000Description: The CIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16 |
||||||||||||
|
tSapIngressQueueOperPIRobsolete
The operating PIR.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPIRRate Type Constraints: range: -1range: 1..100000000Description: The PIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17 |
||||||||||||
|
tSapIngressQueueOperCIRobsolete
The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding adaptation rules. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTCIRRate Type Constraints: range: -1..100000000Description: The CIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18 |
||||||||||||
|
timestamp of last change to this row in tSapIngressQueueTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19 |
||||||||||||
|
tSapIngressQueuePoliced specifies that the out of profile
traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdmin… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20 |
||||||||||||
|
tSapIngressQueueMode specifies the mode in which the queue
is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter. |
TQueueModer/w Type Values:
Description: The mode in which the queue is operating. If the queue is operating in the 'priority' mode, it is capable of handling traffic differently with two distinct priorities. These priorities are assigned by the sta… |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21 |
||||||||||||
|
The value of tSapIngressQueuePoolName specifies the name of
the pool to be applied for SAP ingress queue. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22 |
tSapIngressDSCPTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.3
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressDSCPTable'
a list of all DSCP entries for all sap-ingress policies.
Information about a particular DSCP entry for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType…
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPName Type Constraints: range: 1..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1 |
|||||||||||||
|
This object allows creation/deletion of rows in this table.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2 |
||||||||||||
|
tSapIngressDSCPFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding c… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3 |
||||||||||||
| TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4 |
|||||||||||||
|
timestamp of last change to this row in tSapIngressDSCPTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5 |
tSapIngressDot1pTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.4
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressDot1pTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressDot1pTable'
a list of all dot1p entries for all sap-ingress policies.
Information about a particular dot1p match for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolat…
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolat…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dot1p value to match in the packet. this value is
also used as an index so that for any dot1p value there is only one possible disposition queue and priority. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriority Constraints: range: 0-7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1 |
||||||||||||
|
Row Status for this sap-ingress policy's dot1p entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2 |
||||||||||||
|
tSapIngressDot1pFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forw… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3 |
||||||||||||
|
priority to use for packets that match the dot1p value
tSapIngressDot1pValue. |
TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4 |
||||||||||||
|
timestamp of last change to this row in tSapIngressDot1pTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5 |
.1.3.6.1.4.1.6527.3.1.2.16.3.5
·
1 row entry
·
19 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressIPCriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressIPCriteriaTable'
information about all sap-ingress policies' ip-criteria entries.
Information about a particular ip-criteria entry for a sap-ingress
policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
unique identifier separates this entry from others in this
policy. |
TEntryId Type Constraints: range: 1..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1 |
||||||||||||
|
Row Status for the IP Criteria entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2 |
||||||||||||
|
description of this IP criteria entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3 |
||||||||||||
|
tSapIngressIPCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding cla… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4 |
||||||||||||
|
priority for packets which match this entry's criteria.
when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which ma… |
TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5 |
||||||||||||
|
IP address to match with source-IP of the packet.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6 |
||||||||||||
|
the prefix is the number of bits of the source IP address to match.
|
ALCATEL-ENT1-TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32Description: the number of bits to match in an IP address mask. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7 |
||||||||||||
|
IP address to match with destination-IP of the packet.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8 |
||||||||||||
|
the prefix is the number of bits of the destination IP address to
match. |
ALCATEL-ENT1-TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32Description: the number of bits to match in an IP address mask. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9 |
||||||||||||
|
IP protocol to match. use -1 to disable matching by IP protocol.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255Description: IP protocol number. well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used according
to the description for tSapIngressIPCriteriaSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used according
to the description for tSapIngressIPCriteriaSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12 |
||||||||||||
|
The operator specifies the manner in which
tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperat… |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used according
to the description for tSapIngressIPCriteriaDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used according
to the description for tSapIngressIPCriteriaDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15 |
||||||||||||
|
The operator specifies the manner in which
tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is … |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16 |
||||||||||||
|
DSCP value to match in the packet
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17 |
||||||||||||
|
matches when the packet is a fragment (true)
or when the packet is not a fragment (false) or matches all packets fragmented or not (off). |
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19 |
||||||||||||
|
timestamp of last change to this row in tSapIngressIPCriteriaTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20 |
.1.3.6.1.4.1.6527.3.1.2.16.3.6
·
1 row entry
·
20 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressMacCriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressMacCriteriaTable'
information about all sap-ingress policies' mac-criteria entries.
Information about a particular mac-criteria entry
for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
for a sap-ingress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEntryId Type Constraints: range: 1..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3 |
|||||||||||||
|
tSapIngressMacCriteriaActionFC specifies the forwarding class
or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding c… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4 |
||||||||||||
| TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5 |
|||||||||||||
|
The type of mac frame for which we are defining this match criteria.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFrameTyper/w Type Values:
Description: The type of the frame for which this mac filter match criteria is defined. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6 |
||||||||||||
| SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8 |
|||||||||||||
| SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9 |
|||||||||||||
| SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10 |
|||||||||||||
| SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13 |
|||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
Integer32r/w Constraints: range: -1--1range: 1536-65535 |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14 |
||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15 |
||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16 |
||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17 |
||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18 |
||||||||||||
|
the ethernet type, ssap/dsap, and snap-pid match criteria
are mutually exclusive and only one can be set per entry. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19 |
||||||||||||
|
whether to match snap-oui, and what to match.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20 |
||||||||||||
|
timestamp of last change to this row in tSapIngressMacCriteriaTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21 |
tSapIngressFCTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.7
·
1 row entry
·
15 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressFCTable'
This table maintains the mapping of a particular forwarding class traffic into the specified queue.
Information about a particular sap-ingress policy's
forwarding class mappings to queues.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
forwarding class mappings to queues.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tSapIngressFCName specifies the forwarding class or the sub
forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class … |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1 |
||||||||||||
|
Row Status for this queue.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2 |
||||||||||||
|
The specific queue to be used for packets in this forwarding class.
A value of zero implies that the default queues should be used. |
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIn… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3 |
||||||||||||
|
The specific multicast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the d… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIn… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4 |
||||||||||||
|
The specific broadcast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the default queues s… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIn… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5 |
||||||||||||
|
The specific unknown destination queue to be used for packets in this
forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. A value of zero implies that the defaul… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIngressQueueIdr/w Type Constraints: range: 0..32Description: The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIn… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6 |
||||||||||||
|
tSapIngressFCLastChanged indicates the value of sysUpTime
when the forwarding class entry was last modified. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7 |
||||||||||||
|
tSapIngressFCInProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues. |
TRemarkTyper/w Type Values:
Description: The remarking to be used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8 |
||||||||||||
|
tSapIngressFCInProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9 |
||||||||||||
|
tSapIngressFCInProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'. |
TPrecValueOrNoner/w Type Constraints: range: -1..7Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10 |
||||||||||||
|
tSapIngressFCOutProfRemark specifies the remarking type to
be used for the in profile packets feeding into the queues. |
TRemarkTyper/w Type Values:
Description: The remarking to be used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11 |
||||||||||||
|
tSapIngressFCOutProfDscp specifies the DSCP to be used while
remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12 |
||||||||||||
|
tSapIngressFCOutProfPrec specifies the precedence value to be used
while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'. |
TPrecValueOrNoner/w Type Constraints: range: -1..7Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13 |
||||||||||||
|
tSapIngressFCProfile specifies the profile of the packets
associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have thei… |
TProfileOrNoner/w Type Values:
Description: Profile marking of a packet. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14 |
||||||||||||
|
The value of tSapIngressFCDE1OutOfProfile specifies whether frames
with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfil… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18 |
tSapIngressPrecTable
table.1.3.6.1.4.1.6527.3.1.2.16.3.8
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressPrecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressPrecTable'
This table maintains the mapping of a particular precedence value into a forwarding class
Information about a particular sap-ingress policy's
IP precedence values to forwarding class mappings.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
IP precedence values to forwarding class mappings.
Entries are created and deleted by user. They have
a presumed StorageType of nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Precedence value for which the mapping is done.
|
TPrecValue Type Constraints: range: 0..7Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. |
.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1 |
||||||||||||
|
Row Status for this mapping.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2 |
||||||||||||
|
tSapIngressPrecFC specifies the forwarding class or the sub
forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3 |
||||||||||||
|
The priority to be assigned to the matching traffic.
|
TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4 |
||||||||||||
|
timestamp of last change to this row in tSapIngressPrecTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5 |
.1.3.6.1.4.1.6527.3.1.2.16.3.9
·
1 row entry
·
18 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapIngressIPv6CriteriaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapIngressIPv6CriteriaTable'
Information about all sap-ingress policies' ipv6-criteria entries.
Information about a particular ipv6-criteria entry for a sap-ingress
policy.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
policy.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of the object tSapIngressIPv6CriteriaIndex specifies
uniquely each entry in the policy. |
TEntryId Type Constraints: range: 1..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaRowStatus specifies the
Row Status for the IPv6 Criteria entry. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDescription specifies
an optional user provided description of this IPv6 criteria entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaActionFC specifies the
forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specifica… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaActionPriority specifies
the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched… |
TPriorityOrDefaultr/w Type Values:
Description: the priority to apply to a packet. when set to default(3), the priority from the default-action is used. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies
the IPv6 address to match with source-IPv6 of the packet. |
INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies
the prefix is the number of bits of the source IPv6 address to match. |
INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies
the IPv6 address to match with destination-IPv6 of the packet. |
INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDestIpMask specifies
the prefix is the number of bits of the destination IPv6 address to match. |
INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaNextHeader specifies
the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following v… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255Description: IP protocol number. well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaSourcePortValue1
specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaSourcePortValue2
specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaSourcePortOperator
specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDestPortValue1
specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDestPortValue2
specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDestPortOperator
specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16 |
||||||||||||
|
The value of the object tSapIngressIPv6CriteriaDSCP specifies the
DSCP value to match in the packet |
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17 |
||||||||||||
|
The value of the object indicates timestamp of last change to this
row in tSapIngressIPv6CriteriaTable. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20 |
tSapEgressTable
table.1.3.6.1.4.1.6527.3.1.2.16.4.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapEgressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapEgressTable'
information about all sap-egress policies.
Information about a particular sap-egress policy.
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
the default sa…
Entries are created by user.
Entries are deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
the default sa…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
the sap-egress policy ID is used as index for the table.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTSapEgressPolicyID Type Constraints: range: 1..65535Description: The identification number of a SAP egress policy. |
.1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1 |
||||||||||||
|
Row Status of this policy's entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2 |
||||||||||||
|
scope of the sap-egress policy.
|
TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3 |
||||||||||||
|
user-supplied description of this sap-egress policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4 |
||||||||||||
|
timestamp of last change to this row in tSapEgressTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5 |
tSapEgressQueueTable
table.1.3.6.1.4.1.6527.3.1.2.16.4.2
·
1 row entry
·
25 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapEgressQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapEgressQueueTable'
information about all sap-egress policies' queues.
Information about a particular sap-egress queue.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
the number of a queue. zero is not allowed.
for sap-egress, only three queues are allowed, so the queue index range is restricted. |
ALCATEL-ENT1-TIMETRA-TC-MIBTEgressQueueId Constraints: range: 1-8Description: The value of TEgressQueueId specifies the identification number of an egress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TEgre… |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1 |
||||||||||||
|
Row Status of the entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2 |
||||||||||||
|
The scheduler to which this queue would be feeding to.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
|
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4 |
||||||||||||
|
The weight that needs to be used by the scheduler to which this queue
would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for the above CIR traffic. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6 |
||||||||||||
|
The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7 |
||||||||||||
|
tSapEgressQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8 |
||||||||||||
|
The amount of reserved buffer space (in kilo bytes) for the queue.
|
TBurstSizer/w Type Constraints: range: -1..131072Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9 |
||||||||||||
|
The maximum amount of buffer space (in kilo bytes) allowed for the
queue. |
TBurstSizer/w Type Constraints: range: -1..131072Description: The amount of buffer space (in kbytes) assigned to a queue. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10 |
||||||||||||
|
The percentage of buffer space for the queue, used
exclusively by high priority packets. |
TBurstPercentOrDefaultr/w Type Constraints: range: -1..100Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11 |
||||||||||||
|
The adaptation rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12 |
||||||||||||
|
The adaptation rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13 |
||||||||||||
|
The administrative PIR specified by the user.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w Type Constraints: range: -1range: 1..100000000Description: The PIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14 |
||||||||||||
|
The administrative CIR specified by the user.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w Type Constraints: range: -1..100000000Description: The CIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15 |
||||||||||||
|
tSapEgressQueueOperPIRobsolete
The administrative PIR specified by the user.
|
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPIRRate Type Constraints: range: -1range: 1..100000000Description: The PIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16 |
||||||||||||
|
tSapEgressQueueOperCIRobsolete
The operational value derived by computing the CIR value from
the administrative CIR and PIR values and their corresponding adaptation rules. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTCIRRate Type Constraints: range: -1..100000000Description: The CIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17 |
||||||||||||
|
timestamp of last change to this row in tSapEgressQueueTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18 |
||||||||||||
|
The value of the object tSapEgressQueueUsePortParent specifies
whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This objec… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19 |
||||||||||||
|
The value of the object tSapEgressQueuePortLvl specifies the
port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20 |
||||||||||||
|
The value of the object tSapEgressQueuePortWght specifies the
weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21 |
||||||||||||
|
The value of the object tSapEgressQueuePortCIRLvl specifies the
port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22 |
||||||||||||
|
The value of the object tSapEgressQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23 |
||||||||||||
|
The value of tSapEgressQueuePortAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa. |
Hundredths of a percentUnsigned32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24 |
||||||||||||
|
The value of tSapEgressQueuePoolName specifies the name of
the pool to be applied for SAP egress queue. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25 |
tSapEgressFCTable
table.1.3.6.1.4.1.6527.3.1.2.16.4.3
·
1 row entry
·
13 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSapEgressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSapEgressFCTable'
Information about a particular sap-egress policy's
forwarding class mappings to queues and dot1p values.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVol…
forwarding class mappings to queues and dot1p values.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVol…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
forwarding class name.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFCName Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1 |
||||||||||||
|
Row Status for this queue.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2 |
||||||||||||
|
The queue to use for packets in this forwarding class.
No FC can map to the same queue being used by 'premium' class. You must specify a valid queue-id before setting the row status to active. |
ALCATEL-ENT1-TIMETRA-TC-MIBTEgressQueueIdr/w Type Constraints: range: 0..8Description: The value of TEgressQueueId specifies the identification number of an egress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TEgre… |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3 |
||||||||||||
|
tSapEgressFCDot1PValueobsolete
The value of tSapEgressFCDot1PValue specifies 802.1p value to use for
packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4 |
||||||||||||
|
timestamp of last change to this row in tSapEgressFCTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5 |
||||||||||||
|
The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set
for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '… |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8 |
||||||||||||
|
The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set
for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other tha… |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9 |
||||||||||||
|
The value of tSapEgressFCForceDEValue specifies the DE value to set
for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object … |
TDEValuer/w Type Constraints: range: -1..1Description: This textual-convention specifies the DE (Drop Eligible) bit value. The value of '-1' means DE value is not specified. |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10 |
||||||||||||
|
The value of tSapEgressFCDEMark specifies whether to set DE value in the
frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEVa… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11 |
||||||||||||
|
The value of tSapEgressFCInProfDscp specifies the DSCP name to set
for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either th… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12 |
||||||||||||
|
The value of tSapEgressFCOutProfDscp specifies the DSCP name to set
for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either … |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13 |
||||||||||||
|
The value of tSapEgressFCInProfPrec specifies the precedence value to
set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to ei… |
TPrecValueOrNoner/w Type Constraints: range: -1..7Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused. |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14 |
||||||||||||
|
The value of tSapEgressFCOutProfPrec specifies the precedence value to
set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set … |
TPrecValueOrNoner/w Type Constraints: range: -1..7Description: The precedence bits as used in the IPv4 header. This constitutes of 3 bits and hence can hold the values from 0 to 7. The value '-1' specifies that the precedence value is undefined/unused. |
.1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15 |
tNetworkPolicyTable
table.1.3.6.1.4.1.6527.3.1.2.16.5.1
·
1 row entry
·
9 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkPolicyTable'
Information about a particular Network Policy.
network policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default Entry cann…
network policy (1) is the default entry.
Default Entry is created by the agent, other entries are
created by user.
Default Entry cann…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TNetworkPolicyID Type Constraints: range: 1..65535Description: the identification number of a network policy. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2 |
|||||||||||||
| TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5 |
|||||||||||||
|
tNetworkPolicyDescription holds the description for this policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6 |
||||||||||||
|
tNetworkPolicyIngressDefaultActionFC specifies the default
forwarding class to be used while classifying the ingress traffic. |
ALCATEL-ENT1-TIMETRA-TC-MIBTFCNamer/w Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7 |
||||||||||||
|
tNetworkPolicyIngressDefaultActionProfile specifies the
default profile to be used for the ingressing traffic. |
TProfiler/w Type Values:
Description: the profile marking of a packet at the ingress. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8 |
||||||||||||
|
The object tNetworkPolicyEgressRemark specifies if the system
will remark the egress packets or not. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9 |
||||||||||||
|
Timestamp of last change to this row in tNetworkPolicyTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10 |
||||||||||||
|
The object has significance only for the label edge routers
which should honor the DSCP markings instead of the LSPEXP bits. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11 |
tNetworkIngressDSCPTable
table.1.3.6.1.4.1.6527.3.1.2.16.5.2
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkIngressDSCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkIngressDSCPTable'
Information about a dscp map for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted by…
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted by…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPName Type Constraints: range: 1..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBTFCNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3 |
|||||||||||||
|
there is no DEFVAL for this object. it must be deliberately
set before activating the row. |
TProfiler/w Type Values:
Description: the profile marking of a packet at the ingress. |
.1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4 |
||||||||||||
|
timestamp of last change to this row in tNetworkIngressDSCPTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5 |
.1.3.6.1.4.1.6527.3.1.2.16.5.3
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkIngressDot1pTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkIngressDot1pTable'
Information about a dot1p map for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted b…
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/deleted b…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriority Constraints: range: 0-7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBTFCNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3 |
|||||||||||||
|
there is no DEFVAL for this object. It must be deliberately
set before activating the row. |
TDEProfiler/w Type Values:
Description: This textual-convention specifies the profile marking of a packet. Value of 'in' specifies the in-profile marking. Value of 'out' specifies the out-profile marking. Value of 'de' specifi… |
.1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4 |
||||||||||||
|
timestamp of last change to this row in tNetworkIngressDot1pTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5 |
.1.3.6.1.4.1.6527.3.1.2.16.5.4
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkIngressLSPEXPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkIngressLSPEXPTable'
Information about LSP EXP mapping for a network policy.
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/delet…
Some default entries are created by the agent for the
default network policy (1). These cannot be deleted or
modified. Other entries are created/delet…
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALCATEL-ENT1-TIMETRA-TC-MIBTLspExpValue Constraints: range: 0-7Description: MPLS Experimental bits. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBTFCNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3 |
|||||||||||||
|
there is no DEFVAL for this object. it must be deliberately
set before activating the row. |
TProfiler/w Type Values:
Description: the profile marking of a packet at the ingress. |
.1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4 |
||||||||||||
|
timestamp of last change to this row in tNetworkIngressLSPEXPTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5 |
tNetworkEgressFCTable
table.1.3.6.1.4.1.6527.3.1.2.16.5.7
·
1 row entry
·
10 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkEgressFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkEgressFCTable'
Information about all network policies' egress FC traffic disposition.
Information about a particular network policy's egress
per-forwarding-class traffic disposition.
Entries are created/deleted as an action of creating/deleting
a row in the tNetworkPolicyTable.
…
per-forwarding-class traffic disposition.
Entries are created/deleted as an action of creating/deleting
a row in the tNetworkPolicyTable.
…
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
the name of the forwarding class (FC).
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFCName Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1 |
||||
|
the DSCP to use for in-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2 |
||||
|
the DSCP to use for out-of-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3 |
||||
|
the lsp-exp value to use for in-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTLspExpValuer/w Type Constraints: range: -1..7Description: MPLS Experimental bits. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4 |
||||
|
the lsp-exp value to use for out-of-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTLspExpValuer/w Type Constraints: range: -1..7Description: MPLS Experimental bits. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5 |
||||
|
the Dot1p to use for in-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6 |
||||
|
the Dot1p to use for out-of-profile traffic.
|
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7 |
||||
|
timestamp of last change to this row in tNetworkEgressFCTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8 |
||||
|
The value of tNetworkEgressFCForceDEValue specifies the DE value to set
for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is return… |
TDEValuer/w Type Constraints: range: -1..1Description: This textual-convention specifies the DE (Drop Eligible) bit value. The value of '-1' means DE value is not specified. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9 |
||||
|
The value of tNetworkEgressFCDEMark specifies whether to set DE value
in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCF… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10 |
tNetworkQueuePolicyTable
table.1.3.6.1.4.1.6527.3.1.2.16.6.1
·
1 row entry
·
4 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkQueuePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkQueuePolicyTable'
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1 |
|||||||||||||
| SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2 |
|||||||||||||
| ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3 |
|||||||||||||
| SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8 |
tNetworkQueueTable
table.1.3.6.1.4.1.6527.3.1.2.16.6.2
·
1 row entry
·
24 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkQueueTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkQueueTable'
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The queue ID is used as the secondary index to the table entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTQueueId Constraints: range: 1-16Description: The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1 |
||||||||||||
|
Row Status of the entry. This allows creation/deletion of rows in this
table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2 |
||||||||||||
|
The tNetworkQueuePoolName specifies the pool that is associated
with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3 |
||||||||||||
|
The scheduler to which this queue would be feeding to.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
|
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5 |
||||||||||||
|
The weight that needs to be used by the scheduler to which this queue
would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for the above CIR traffic. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7 |
||||||||||||
|
The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8 |
||||||||||||
|
This object specifies if this is a multicast queue or not.
|
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9 |
||||||||||||
|
tNetworkQueueExpedite specifies the priority that this queue should
be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by lo… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10 |
||||||||||||
|
The percentage of max rate allowed.
|
TRatePercentr/w Type Constraints: range: 0..100Description: The percentage of maximum rate allowed. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11 |
||||||||||||
|
The percentage of max rate allowed.
|
TPIRRatePercentr/w Type Constraints: range: 1..100Description: The percentage of maximum PIR rate allowed. A value of 0 is no acceptable, so the range begins at 1. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12 |
||||||||||||
|
The percentage of reserved buffer space for the queue,
defined to two decimal places. |
Hundredths of a percentTBurstHundredthsOfPercentr/w Type Constraints: range: 0..10000Description: The percentage of buffer space assigned to a queue that is reserved for some purpose, defined to two decimal places. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13 |
||||||||||||
|
The percentage of reserved buffer space for the queue,
defined to two decimal places. |
Hundredths of a percentTBurstHundredthsOfPercentr/w Type Constraints: range: 0..10000Description: The percentage of buffer space assigned to a queue that is reserved for some purpose, defined to two decimal places. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14 |
||||||||||||
|
The percentage of buffer space for the queue, used
exclusively by high priority packets. |
TBurstPercentOrDefaultr/w Type Constraints: range: -1..100Description: The percentage of buffer space assigned to a queue that is reserved for some purpose. The value -1 means that the actual value is derived from the corresponding buffer policy's default value. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15 |
||||||||||||
|
The value of the object tNetworkQueueLastChanged indicates the
timestamp of last change to this row in tNetworkQueueTable. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16 |
||||||||||||
|
The value of the object tNetworkQueueUsePortParent specifies
whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17 |
||||||||||||
|
The value of the object tNetworkQueuePortLvl specifies the
port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18 |
||||||||||||
|
The value of the object tNetworkQueuePortWght specifies the
weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19 |
||||||||||||
|
The value of the object tNetworkQueuePortCIRLvl specifies the
port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20 |
||||||||||||
|
The value of the object tNetworkQueuePortCIRWght specifies the
weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21 |
||||||||||||
|
The value of tNetworkQueuePortAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa. |
Hundredths of a percentUnsigned32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22 |
||||||||||||
|
The value of tNetworkQueueCIRAdaptation specifies the adaptation rule
to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the … |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23 |
||||||||||||
|
The value of tNetworkQueuePIRAdaptation specifies the adaptation rule
to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the … |
TAdaptationRuler/w Type Values:
Description: The adaptation rule to be applied to calcluate the operational values for the specified entity. |
.1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24 |
tNetworkQueueFCTable
table.1.3.6.1.4.1.6527.3.1.2.16.6.3
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNetworkQueueFCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNetworkQueueFCTable'
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Forwarding class name.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFCName Type Constraints: range: 1..32Description: The name of a Forwarding Class entry. |
.1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1 |
||||||||||||
|
Row Status for this queue.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2 |
||||||||||||
|
The specific queue to be used for packets in this forwarding class.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTQueueIdr/w Constraints: range: 1-16Description: The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3 |
||||||||||||
|
The specific multicast queue to be used for packets in this forwarding
class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. |
ALCATEL-ENT1-TIMETRA-TC-MIBTQueueIdr/w Constraints: range: 1-16Description: The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4 |
||||||||||||
|
timestamp of last change to this row in tNetworkQueueFCTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7 |
tSlopePolicyTable
table.1.3.6.1.4.1.6527.3.1.2.16.10.1
·
1 row entry
·
13 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSlopePolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSlopePolicyTable'
Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
Slope Policy Entry.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tSlopePolicy maintains the name of the slope policy
identifying the policy. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1 |
||||||||||||
|
Row Status of the entry. This allows creation/deletion of rows in this
table. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2 |
||||||||||||
|
User-provided description of the policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3 |
||||||||||||
|
tSlopeHiAdminStatus specifies the admin state for the high priority RED
slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4 |
||||||||||||
|
The percentage of the buffer utilized after which the drop probability
starts to rise above 0. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5 |
||||||||||||
|
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be dropped. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6 |
||||||||||||
|
The drop probability increases steadily from 0 at the
tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7 |
||||||||||||
|
tSlopeLoAdminStatus specifies the admin state for the high priority RED
slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8 |
||||||||||||
|
The percentage of the buffer utilized after which the drop probability
starts to rise above 0. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9 |
||||||||||||
|
The percentage of the buffer utilized after which the drop probability
is 100 percent. This implies that all packets beyond this point will be dropped. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10 |
||||||||||||
|
The drop probability increases steadily from 0 at the
tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11 |
||||||||||||
|
The time average factor describes the weighting between the previous
shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization. |
Unsigned32r/w Constraints: range: 0-15 |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12 |
||||||||||||
|
Timestamp of when this entry was last changed.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13 |
tSchedulerPolicyTable
table.1.3.6.1.4.1.6527.3.1.2.16.12.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tSchedulerPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tSchedulerPolicyTable'
Information about a particular Scheduler Policy.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the scheduler policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1 |
||||||||||||
|
Row Status of the entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2 |
||||||||||||
|
Description for the scheduler policy
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3 |
||||||||||||
|
timestamp of last change to this row in tSchedulerPolicyTable.
|
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4 |
||||||||||||
|
The value of tSchedulerPolicyFrameBasedAccnt specifies whether
to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If th… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5 |
tVirtualSchedulerTable
table.1.3.6.1.4.1.6527.3.1.2.16.12.2
·
1 row entry
·
18 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tVirtualSchedulerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tVirtualSchedulerTable'
Information about a particular Scheduler belonging to a Scheduler
Policy.
Policy.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Tier to which this scheduler belongs to.
|
Integer32 Constraints: range: 1-3 |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1 |
||||||||||||
|
Name of the scheduler policy.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2 |
||||||||||||
|
Row Status of the entry.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3 |
||||||||||||
|
Description for the scheduler policy
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4 |
||||||||||||
|
The scheduler to which this scheduler would be feeding to.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
|
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6 |
||||||||||||
|
The weight that needs to be used by the scheduler to which this queue
would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7 |
||||||||||||
|
This specifies the level of priority while feeding to the parent.
The level '0' means treat all offered load for this queue as for the above CIR traffic. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8 |
||||||||||||
|
The weight that needs to be used until the committed rate by the
scheduler to which this queue would be feeding to. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9 |
||||||||||||
|
The rate allowed for this scheduler. A value of -1 implies
maximum. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPIRRater/w Type Constraints: range: -1range: 1..100000000Description: The PIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10 |
||||||||||||
|
The rate allowed for this scheduler. A value of -1 implies
maximum. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTCIRRater/w Type Constraints: range: -1..100000000Description: The CIR rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11 |
||||||||||||
|
tVirtualSchedulerSummedCIR specifies if the CIR should be
used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12 |
||||||||||||
|
The value of the object tVirtualSchedulerLastChanged indicates the
timestamp of last change to this row in tVirtualSchedulerTable. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13 |
||||||||||||
|
The value of the object tVirtualSchedulerUsePortParent specifies
whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. Thi… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14 |
||||||||||||
|
The value of the object tVirtualSchedulerPortLvl specifies the
port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15 |
||||||||||||
|
The value of the object tVirtualSchedulerPortWght specifies the
weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16 |
||||||||||||
|
The value of the object tVirtualSchedulerPortCIRLvl specifies the
port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17 |
||||||||||||
|
The value of the object tVirtualSchedulerPortCIRWght specifies the
weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18 |
tPortSchedulerPlcyTable
table.1.3.6.1.4.1.6527.3.1.2.16.12.3
·
1 row entry
·
25 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tPortSchedulerPlcyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tPortSchedulerPlcyTable'
The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
Each row represents a particular port scheduler. Entries are created
and deleted by the user.
and deleted by the user.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tPortSchedulerPlcyName specifies the name of the port
scheduler. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1 |
||||||||||||
|
The value of tPortSchedulerPlcyRowStatus is used for the creation
and deletion of port scheduler policies. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2 |
||||||||||||
|
The value of tPortSchedulerPlcyDescription specifies the description
of this port scheduler. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3 |
||||||||||||
|
The value of tPortSchedulerPlcyLastChanged indicates the value of
sysUpTime at the time of the most recent management change to this row. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4 |
||||||||||||
|
The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum
frame based bandwidth limit of this port scheduler. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth
limit, PIR, for priority level 1. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir
bandwidth limit for priority level 1. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth
limit, PIR, for priority level 2. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir
bandwidth limit for priority level 2. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth
limit, PIR, for priority level 3. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir
bandwidth limit for priority level 3. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth
limit, PIR, for priority level 4. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir
bandwidth limit for priority level 4. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth
limit, PIR, for priority level 5. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir
bandwidth limit for priority level 5. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth
limit, PIR, for priority level 6. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir
bandwidth limit for priority level 6. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth
limit, PIR, for priority level 7. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir
bandwidth limit for priority level 7. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth
limit, PIR, for priority level 8. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerPIRr/w Type Constraints: range: -1range: 1..40000000Description: The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20 |
||||||||||||
|
The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir
bandwidth limit for priority level 8. |
kbpsALCATEL-ENT1-TIMETRA-TC-MIBTPortSchedulerCIRr/w Type Constraints: range: -1..40000000Description: The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21 |
||||||||||||
|
The value of tPortSchedulerPlcyOrphanLvl specifies the port priority
of orphaned queues and schedulers that are above-cir. |
TLevelr/w Type Constraints: range: 1..8Description: The level of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22 |
||||||||||||
|
The value of tPortSchedulerPlcyOrphanWeight specifies the weight of
orphaned queues and schedulers that are above-cir. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23 |
||||||||||||
|
The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority
of orphaned queues and schedulers that are within-cir. |
TLevelOrDefaultr/w Type Constraints: range: 0..8Description: The level of the specified entity while feeding into the parent. The value 0 is used to denote a default value. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24 |
||||||||||||
|
The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of
orphaned queues and schedulers that are within-cir. |
ALCATEL-ENT1-TIMETRA-TC-MIBTWeightr/w Type Constraints: range: 0..100Description: The weight of the specified entity while feeding into the parent. |
.1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25 |
tAtmTdpTable
table.1.3.6.1.4.1.6527.3.1.2.16.21.1
·
1 row entry
·
14 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tAtmTdpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tAtmTdpTable'
This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
This list contains ATM traffic descriptor
objects and the associated parameters. All objects that
do not apply to a given service category are given default
values of zero.
objects and the associated parameters. All objects that
do not apply to a given service category are given default
values of zero.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object is used to identify an entity
inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext. |
ATM-TC-MIBAtmTrafficDescrParamIndex Constraints: range: 1-1000 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1 |
||||||||||||
|
tAtmTdpSir identifies the sustained information rate
in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service … |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2 |
||||||||||||
|
tAtmTdpPir identifies the peak information rate
in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service categ… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3 |
||||||||||||
|
tAtmTdpMbs identifies the maximum burst size
in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: … |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4 |
||||||||||||
|
tAtmTdpMir identifies the Minimum Information Rate
in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service c… |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5 |
||||||||||||
|
tAtmTdpShaping determines whether egress shaping should occur.
The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6 |
||||||||||||
|
tAtmTdpServCat determines the ATM service category.
|
ATM-TC-MIBAtmServiceCategoryr/w Type Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7 |
||||||||||||
|
The value of tAtmTdpDescription specifies an ASCII string used
to describe the ATM traffic descriptor. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8 |
||||||||||||
|
tAtmTdpLastChanged maintains the timestamp of the last change
made to a row in the Traffic Descriptor Profile Table. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9 |
||||||||||||
|
tAtmTdpRowStatus is used to create/modify/delete a new row in
this table. Only createAndGo/Active/Destroy are supported |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10 |
||||||||||||
|
tAtmTdpDescrType identifies the types of ATM traffic descriptor.
The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescr… |
TAtmTdpDescrTyper/w Type Values:
Description: The TAtmTdpDescrType is an enumerated integer whose value indicates the types of cell loss priority to be used in conjunction with traffic parameters. The following values are outlined: Integer Value … |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11 |
||||||||||||
|
tAtmTdpCdvt identifies the Cell Delay Variation
Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category … |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12 |
||||||||||||
|
tAtmTdpPolicing determines whether ingress traffic is policed.
Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13 |
||||||||||||
|
tAtmTdpCLPTagging controls the setting of the CLP bit in the
ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued o… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14 |
tNamedPoolPolicyTable
table.1.3.6.1.4.1.6527.3.1.2.16.22.1
·
1 row entry
·
7 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tNamedPoolPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tNamedPoolPolicyTable'
This table contains information on Named buffer pools policy.
This list contains Named buffer pools policy related information.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tNamedPoolPolicyName indicates the name of
Named pool policy. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1 |
||||||||||||
|
The value of tNamedPoolPolicyRowStatus is used for
creation or deletion of named pool policies. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2 |
||||||||||||
|
The value of tNamedPoolPolicyLastChanged indicates the
sysUpTime when this row was last modified. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3 |
||||||||||||
|
The value of tNamedPoolPolicyDescription specifies the
description for a specific named pool policy. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4 |
||||||||||||
|
The value of tNamedPoolPolicyQ1DefaultWeight specifies
the port allocation weight given to the default pools. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5 |
||||||||||||
|
The value of tNamedPoolPolicyQ1MdaWeight specifies
the port allocation weight given to the MDA named pools. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6 |
||||||||||||
|
The value of tNamedPoolPolicyQ1PortWeight specifies
the port allocation weight given to the local port named pools. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7 |
tQ1NamedPoolTable
table.1.3.6.1.4.1.6527.3.1.2.16.22.2
·
1 row entry
·
9 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tQ1NamedPoolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-QOS-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-QOS-MIB::tQ1NamedPoolTable'
This table contains information on Q1 pools policy.
This list contains Q1 pools policy related information.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of tQ1NamedPoolPolicyName indicates the name of
the existing Q1 named pool policy. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1 |
||||||||||||
|
The value of tQ1NamedPoolName indicates the name of
the existing pool within the policy. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2 |
||||||||||||
|
The value of tQ1NamedPoolRowStatus is used for
creation or deletion of Q1 named pools. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3 |
||||||||||||
|
The value of tQ1NamedPoolLastChanged indicates the
sysUpTime when this row was last modified. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4 |
||||||||||||
|
The value of tQ1NamedPoolDescription specifies the
description for a specific Q1 named pool. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5 |
||||||||||||
|
The value of tQ1NamedPoolNetworkAllocWeight specifies
the weight used to divide network associated buffer space between named pools. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6 |
||||||||||||
|
The value of tQ1NamedPoolAccessAllocWeight specifies
the weight used to divide access associated buffer space between named pools. |
Unsigned32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7 |
||||||||||||
|
The value of tQ1NamedPoolSlopePolicy specifies the
name of the slop-policy which is used to override the default slope-policy for the named buffer pool. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8 |
||||||||||||
|
The value of tQ1NamedPoolReservedCbs specifies the
reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9 |