ALCATEL-ENT1-TIMETRA-FILTER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
15
Rows
15
Columns
226
tIPFilterTable
table.1.3.6.1.4.1.6527.3.1.2.21.1
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tIPFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tIPFilterTable'
Contains a List of all ip filters configured on this system.
Information about a particular IP Filter entry. Entries are
created/deleted by user. Entries have a presumed StorageType of
nonVolatile.
created/deleted by user. Entries have a presumed StorageType of
nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Uniquely identifies an ip filter as configures on this system.
|
TIPFilterID Constraints: range: 1-65535Description: the identification number of an IP filter. |
.1.3.6.1.4.1.6527.3.1.2.21.1.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tIPFilterTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.1.1.2 |
||||||||||||
|
This object specifies the scope of this filter definition. If defined
as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2). |
TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.21.1.1.3 |
||||||||||||
|
User-provided description for this filter.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.1.1.4 |
||||||||||||
|
The action to take for packets that do not match any filter entries.
|
TFilterActionr/w Type Values:
Description: action to take on the traffic when no filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forward… |
.1.3.6.1.4.1.6527.3.1.2.21.1.1.5 |
tIPFilterParamsTable
table.1.3.6.1.4.1.6527.3.1.2.21.2
·
1 row entry
·
50 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tIPFilterParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tIPFilterParamsTable'
A table of all IP filter match entries for all IP filters.
Information about a particular IP Filter entry.
Every IP Filter can have zero or more IP Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will be…
Every IP Filter can have zero or more IP Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will be…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is the secondary index for the entry. Every ip filter can have
multiple entries, therefore every ip filter entry is identified by the tIPFilterId and tIPFilterParamsIndex. |
TEntryId Type Constraints: range: 0..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tIPFilterParamsTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.2 |
||||||||||||
|
This object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled. |
TFilterLogIdr/w Type Constraints: range: 0range: 101..199Description: uniquely identifies an entry in the filter log table. 0 indicates an invalid log-id. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.3 |
||||||||||||
|
User-provided description for this filter entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.4 |
||||||||||||
|
The action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
TFilterActionOrDefaultr/w Type Values:
Description: action to take on the traffic when the filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forwar… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.5 |
||||||||||||
|
The ip-address of the nexthop to which the packet should be forwarded
if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.6 |
||||||||||||
|
tIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/
indirectly reachable. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.7 |
||||||||||||
|
The DSCP value that should be remarked in case a packet hits this
filter entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPFilterActionValuer/w Type Constraints: range: -1..255Description: The value of a Differential Services Code Point. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.8 |
||||||||||||
|
tIPFilterParamsRemarkDSCPMask specifies the care bits while remarking
with the DSCP value. |
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPFilterActionValuer/w Type Constraints: range: -1..255Description: The value of a Differential Services Code Point. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.9 |
||||||||||||
|
tIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be
remarked on the packet if it hits this filter entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.10 |
||||||||||||
|
IP address to match the source-ip of the packet.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.11 |
||||||||||||
|
If different from 0, the object tIPFilterParamsSourceIpMask
specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tIPFilterParamsSourceIpAddr. … |
ALCATEL-ENT1-TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32Description: the number of bits to match in an IP address mask. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.12 |
||||||||||||
|
IP address to match the destination-ip of the packet.
|
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.13 |
||||||||||||
|
If different from 0, the object tIPFilterParamsDestinationIpMask
specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestin… |
ALCATEL-ENT1-TIMETRA-TC-MIBIpAddressPrefixLengthr/w Type Constraints: range: 0..32Description: the number of bits to match in an IP address mask. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.14 |
||||||||||||
|
IP protocol to match. set to -1 to disable matching IP protocol. If
the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tIPFilterPar… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255Description: IP protocol number. well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.15 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used as per the
description for tIPFilterParamsSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.16 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used as per the
description for tIPFilterParamsSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.17 |
||||||||||||
|
The operator specifies the manner in which
tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as describ… |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.18 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used as per the
description for tIPFilterParamsDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.19 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used as per the
description for tIPFilterParamsDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.20 |
||||||||||||
|
The operator specifies the manner in which
tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsDestPortOperator is used as described in … |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.21 |
||||||||||||
|
DSCP to be matched on the packet.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.22 |
||||||||||||
|
If enabled, this object matches fragmented/unfragmented packets as per
the value of the object. |
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.24 |
||||||||||||
|
If enabled, this object matches packets if they have options present
or not as per the value of the object. |
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.25 |
||||||||||||
|
The value of the specific ip-option to match.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTIpOptionr/w Type Constraints: range: 0..255Description: IP packet options octet. explanation of the octet bits: IP OPTION NUMBERS The Internet Protocol (IP) has provision for optional header fields identified by an option type field. Options 0 and 1 a… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.26 |
||||||||||||
|
Mask is ANDed with the ip-option before being compared to
tIPFilterParamsIpOptionValue. |
ALCATEL-ENT1-TIMETRA-TC-MIBTIpOptionr/w Type Constraints: range: 0..255Description: IP packet options octet. explanation of the octet bits: IP OPTION NUMBERS The Internet Protocol (IP) has provision for optional header fields identified by an option type field. Options 0 and 1 a… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.27 |
||||||||||||
|
If enabled, matches multiple options as per the value of the object.
|
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.28 |
||||||||||||
|
If Enabled, matches a TCP Syn as per value of the object.
|
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.29 |
||||||||||||
|
If Enabled, matches a TCP Ack as per value of the object.
|
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.30 |
||||||||||||
|
Icmp code to be matched. tIPFilterParamsIcmpCode complements the
object tIPFilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled. |
Integer32r/w Constraints: range: -1-255 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.31 |
||||||||||||
|
Icmp type to be matched. tIPFilterParamsIcmpType complements the
object tIPFilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled. |
Integer32r/w Constraints: range: -1-255 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.32 |
||||||||||||
|
When tIPFilterParamsCflowdSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.33 |
||||||||||||
|
When tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected t… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.34 |
||||||||||||
|
The interface name for the nexthop to which the packet should be
forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-32Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.35 |
||||||||||||
|
This object indicates the number of times an ingress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.36 |
||||||||||||
|
This object indicates the number of times an egress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.37 |
||||||||||||
|
tIPFilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.38 |
||||||||||||
|
tIPFilterParamsForwardRedPlcy specifies the redirect policy to be
used to determine the nexthop. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.39 |
||||||||||||
|
tIPFilterParamsActiveDest indicates the IP address of the active
destination for this IP filter. A value of 0 indicates that there is currently no active destination. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.40 |
||||||||||||
|
tIPFilterParamsFwdSvcId indicates the service id of the
destination for this IP filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2147483647Description: A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.41 |
||||||||||||
|
tIPFilterParamsFwdSapPortId specifies the sap port identity of the
destination for this IP filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.42 |
||||||||||||
|
tIPFilterParamsFwdSapEncapVal specifies the sap port encap value
of the destination SAP for this IP filter entry. A value different from 0 can only be specified if the value of the tIPFilterParamsAction o… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w Description: The value of the label used to identify the entity using the specified encapsulation value on a specific port. The format of this object depends on the encapsulation type defined on this port. When… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.43 |
||||||||||||
|
tIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the
destination for this IP filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can o… |
ALCATEL-ENT1-TIMETRA-TC-MIBSdpBindIdr/w Type Constraints: range: 8Description: The value used to uniquely identify an SDP Binding. The first four octets correspond to the zero-extended 16-bit SDP ID, while the remaining four octets correspond to the 32-bit VC ID, both encoded in network byte order. |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.44 |
||||||||||||
|
tIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Als… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.45 |
||||||||||||
|
tIPFilterParamsTimeRangeState indicates whether or not the entry
is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPFilterPa… |
TTimeRangeState Type Values:
Description: The textual convention TTimeRangeState is used to indicate the state of an object that is controlled by a time range. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time ra… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.46 |
||||||||||||
|
The value of tIPFilterParamsRedirectURL specifies the URL
to redirect to, when the value of tIPFilterParamsAction is 'httpRedirect'. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.47 |
||||||||||||
|
If different from 0, the object tIPFilterParamsSrcIpFullMask
specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tIPFilterParamsSourceIpAddr. … |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.48 |
||||||||||||
|
If different from 0, the object tIPFilterParamsDestIpFullMask
specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinati… |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.49 |
||||||||||||
|
The value of tIPFilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.50 |
||||||||||||
|
The value of tIPFilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.2.1.51 |
tMacFilterTable
table.1.3.6.1.4.1.6527.3.1.2.21.3
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tMacFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tMacFilterTable'
Contains a List of all mac filters configured on this system.
Information about a particular MAC Filter. Entries are created/deleted
by user. Entries have a presumed StorageType of nonVolatile.
by user. Entries have a presumed StorageType of nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Uniquely identifies a mac filter as configures on this system.
|
TMACFilterID Constraints: range: 1-65535Description: the identification number of a MAC filter. |
.1.3.6.1.4.1.6527.3.1.2.21.3.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tMacFilterTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.3.1.2 |
||||||||||||
|
This object specifies the scope of this filter definition. If defined
as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2). |
TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.21.3.1.3 |
||||||||||||
|
User-provided description for this filter.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.3.1.4 |
||||||||||||
|
The action to take for packets that do not match any filter entries.
|
TFilterActionr/w Type Values:
Description: action to take on the traffic when no filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forward… |
.1.3.6.1.4.1.6527.3.1.2.21.3.1.5 |
tMacFilterParamsTable
table.1.3.6.1.4.1.6527.3.1.2.21.4
·
1 row entry
·
31 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tMacFilterParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tMacFilterParamsTable'
A table of all MAC filter match entries for all MAC filters.
Information about a particular MAC Filter entry.
Every MAC Filter can have zero or more MAC Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will…
Every MAC Filter can have zero or more MAC Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is the secondary index for the entry. Every mac filter can have
multiple entries, therefore every mac filter entry is identified by the tMacFilterId and tMacFilterParamsIndex. |
TEntryId Type Constraints: range: 0..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tMacFilterParamsTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.2 |
||||||||||||
|
This object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled. |
TFilterLogIdr/w Type Constraints: range: 0range: 101..199Description: uniquely identifies an entry in the filter log table. 0 indicates an invalid log-id. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.3 |
||||||||||||
|
User-provided description for this filter entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.4 |
||||||||||||
|
The action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
TFilterActionOrDefaultr/w Type Values:
Description: action to take on the traffic when the filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forwar… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.5 |
||||||||||||
|
The type of mac frame for which we are defining this match criteria.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTFrameTyper/w Type Values:
Description: The type of the frame for which this mac filter match criteria is defined. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.6 |
||||||||||||
|
Source MAC to match for this policy MAC filter entry.
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.8 |
||||||||||||
|
Source MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterPara… |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.9 |
||||||||||||
|
Destination MAC mask value for this policy MAC filter entry.
|
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.10 |
||||||||||||
|
Destination MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilte… |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.11 |
||||||||||||
|
IEEE 802.1p priority value for this policy MAC filter entry.
Use -1 to disable matching this filter criteria. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.12 |
||||||||||||
|
IEEE 802.1p priority mask value for this policy MAC filter entry.
Use zero to disable matching, use 7 to match everything. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.13 |
||||||||||||
|
Ethertype for this policy MAC filter entry. Use -1 to disable matching
by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to Ethernet_II. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.14 |
||||||||||||
|
MAC DSAP to match for this policy MAC filter entry. This object has no
significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.15 |
||||||||||||
|
MAC DSAP mask for this policy MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.16 |
||||||||||||
|
MAC SSAP to match for this policy MAC filter entry. This object has no
significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.17 |
||||||||||||
|
MAC SSAP mask for this policy MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. |
ALCATEL-ENT1-TIMETRA-TC-MIBServiceAccessPointr/w Type Constraints: range: -1..255Description: 802.2 LLC SAP value, Source and Destination. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.18 |
||||||||||||
|
MAC SNAP PID to match for this policy MAC filter entry. use -1 to
disable matching by this criteria. This object has no significance if object tMacFilterParamsFrameType is not set to 802dot2SNAP. |
Integer32r/w Constraints: range: -1-65535 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.19 |
||||||||||||
|
MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what
to match. Matching can be disabled by the use of the value off(1). This object has no significance if the object tMacFilterParamsFrameType is not set… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.4.1.20 |
||||||||||||
|
This object indicates the number of times an ingress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.21 |
||||||||||||
|
This object indicates the number of times an egress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.22 |
||||||||||||
|
tMacFilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.23 |
||||||||||||
|
tMacFilterParamsFwdSvcId indicates the service id of the
destination for this Mac filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxServId Type Constraints: range: 0..2147483647Description: A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.24 |
||||||||||||
|
tMacFilterParamsFwdSapPortId specifies the sap port identity of the
destination for this Mac filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be … |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxPortIDr/w Description: A portid is an unique 32 bit number encoded as shown below. 32 30 | 29 26 | 25 22 | 21 16 | 15 1 | +-----+-------+-------+-------+-------+ |000 | slot | mda | port | zero | Physical Port +-----+-------… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.25 |
||||||||||||
|
tMacFilterParamsFwdSapEncapVal specifies the sap port encap value
of the destination SAP for this Mac filter entry. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-ze… |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w Description: The value of the label used to identify the entity using the specified encapsulation value on a specific port. The format of this object depends on the encapsulation type defined on this port. When… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.26 |
||||||||||||
|
tMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the
destination for this Mac filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specif… |
ALCATEL-ENT1-TIMETRA-TC-MIBSdpBindIdr/w Type Constraints: range: 8Description: The value used to uniquely identify an SDP Binding. The first four octets correspond to the zero-extended 16-bit SDP ID, while the remaining four octets correspond to the 32-bit VC ID, both encoded in network byte order. |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.27 |
||||||||||||
|
tMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Al… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.28 |
||||||||||||
|
tMacFilterParamsTimeRangeState indicates whether or not the entry
is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tMacFilter… |
TTimeRangeState Type Values:
Description: The textual convention TTimeRangeState is used to indicate the state of an object that is controlled by a time range. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time ra… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.29 |
||||||||||||
|
The value of tMacFilterParamsRedirectURL specifies the URL
to redirect to, when the value of tMacFilterParamsAction is 'httpRedirect'. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.30 |
||||||||||||
|
The value of tMacFilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.31 |
||||||||||||
|
The value of tMacFilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.4.1.32 |
tFilterLogTable
table.1.3.6.1.4.1.6527.3.1.2.21.5
·
1 row entry
·
11 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterLogTable'
A table of all filter logs.
Information about a particular Filter Log entry.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is the index for the entry. An entry cannot be created with an
id of 0. |
TFilterLogId Type Constraints: range: 0range: 101..199Description: uniquely identifies an entry in the filter log table. 0 indicates an invalid log-id. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tFilterLogTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.2 |
||||||||||||
|
This object specifies the destination of the log.
|
TFilterLogDestinationr/w Type Values:
Description: determines the location where filtered packets are logged. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.3 |
||||||||||||
|
User-provided description for this filter log entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.4 |
||||||||||||
|
This object specifies the maximum number of entries
that the log (memory or file) can store. If tFilterLogDestination is not 'memory' then tFilterLogMaxNumEntries maintains a value of '0' |
Unsigned32r/w Constraints: range: 0-50000 |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.5 |
||||||||||||
| SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.6 |
|||||||||||||
| SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.7 |
|||||||||||||
| SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.8 |
|||||||||||||
| SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.9 |
|||||||||||||
|
The value of tFilterLogSummaryEnabled specifies whether
or not summarization of filter log entries is performed. Summarization is only allowed in case tFilterLogDestination is set to syslog. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.10 |
||||||||||||
|
The value of tFilterLogSummaryCrit1 specifies how
filter log entries will be summarized. This field is only meaningful if the object tFilterLogSummaryEnabled is set to true. |
TFilterLogSummaryCriteriumr/w Type Values:
Description: Indicates the field on which log summarisation will be done. - when set to srcAddr, received log packets are summarized based on the src ip/mac-addr - when set to dstAddr, received log packets are summarized based o… |
.1.3.6.1.4.1.6527.3.1.2.21.5.1.11 |
.1.3.6.1.4.1.6527.3.1.2.21.10
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectPolicyTable'
Contains a List of all redirect policies configured on this system.
Information about a particular redirect policy. Entries are
created/deleted by user.
created/deleted by user.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRedirectPolicy uniquely identifies each redirect policy
configured on this system. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.21.10.1.1 |
||||||||||||
|
tFilterRPRowStatus allows entries to be created and deleted in the
tFilterRedirectPolicyTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.10.1.2 |
||||||||||||
|
User-provided description for this redirect policy is maintained in
the object tFilterRPDescription. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.10.1.3 |
||||||||||||
|
tFilterRPAdminState holds the admin state of the policy. If the
admin state is 'outOfService', the tests will not be conducted. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values:
Description: The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules. |
.1.3.6.1.4.1.6527.3.1.2.21.10.1.4 |
||||||||||||
|
tFilterRPActiveDest indicates the IP address of the active
destination. A value of 0 indicates that there is currently no active destination. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.10.1.5 |
tFilterRedirectDestTable
table.1.3.6.1.4.1.6527.3.1.2.21.11
·
1 row entry
·
7 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectDestTable'
Contains a List of all redirect destinations configured on this system.
Information about a particular Redirect destination. Entries are
created/deleted by user.
created/deleted by user.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRedirectDest holds the IP address of the destination
entry. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.1 |
||||||||||||
|
tFilterRDRowStatus allows entries to be created and deleted
in the tFilterRedirectDestTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.2 |
||||||||||||
|
User-provided description for this destination is maintained in
the object tFilterRDDescription. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.3 |
||||||||||||
|
tFilterRDAdminPriority holds the configured base priority for
the destination. |
Unsigned32r/w Constraints: range: 1-255 |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.4 |
||||||||||||
|
tFilterRDAdminPriority maintains the operational value of the
priority for this destination. The highest operational priority across multiple destinations is used as the preferred destination. A value of … |
Unsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.5 |
||||||||||||
|
tFilterRDAdminState maintains the configured state of the destination.
If the admin state is 'outOfService', the tests for this destination will not be conducted. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxAdminStater/w Type Values:
Description: The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules. |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.6 |
||||||||||||
|
The value of tFilterRDOperState indicates the operational state of
the destination. |
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxOperState Type Values:
Description: The TmnxOperState data type is an enumerated integer that describes the values used to identify the current operational state of functional modules. |
.1.3.6.1.4.1.6527.3.1.2.21.11.1.7 |
.1.3.6.1.4.1.6527.3.1.2.21.12
·
1 row entry
·
25 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectSNMPTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectSNMPTestTable'
Contains a List of all redirect SNMP tests configured on this system.
Information about a specific SNMP test configured for a destination.
Entries are created/deleted by user.
Entries are created/deleted by user.
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRedirectSNMPTest specifies the name of the SNMP test.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.1 |
||||||||||||||||||||
|
tFilterRSTRowStatus allows tests to be created and deleted in the
tFilterRedirectSNMPTestTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.2 |
||||||||||||||||||||
|
tFilterRSTOID stores the OID of the object to be fetched from the
destination. |
ObjectIdentifierr/w | .1.3.6.1.4.1.6527.3.1.2.21.12.1.3 |
||||||||||||||||||||
|
The value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community
String or the SNMPv3 Context Name used to conduct this SNMP test as described in RFC2571 and RFC2737. When the value of tFilterRSTSNMPVe… |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-32Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.4 |
||||||||||||||||||||
|
tFilterRSTSNMPVersion specifies the SNMP PDU format to be used
while conducting the test. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.12.1.5 |
||||||||||||||||||||
|
The value of tFilterRSTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end host. |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.6 |
||||||||||||||||||||
|
The value of tFilterRSTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unrespons… |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.7 |
||||||||||||||||||||
|
The value of tFilterRSTDropCount specifies the number of
consecutive requests that must fail for the destination to declared unreachable. |
Unsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.8 |
||||||||||||||||||||
|
The value of tFilterRSTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test has marked it unreachable. |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.9 |
||||||||||||||||||||
|
The value of tFilterRSTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before being used again. |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.10 |
||||||||||||||||||||
|
tFilterRSTLastActionTime maintains the time stamp when this test
received a response for a probe sent out. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.11 |
||||||||||||||||||||
|
The object tFilterRSTLastOID holds the OID received in the
response. |
ObjectIdentifier | .1.3.6.1.4.1.6527.3.1.2.21.12.1.12 |
||||||||||||||||||||
|
tFilterRSTLastType maintains the type of the value received.
A value of none(0) indicated that no value has been received |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.12.1.13 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'counter32'.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.14 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'unsigned32'.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.15 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'timeTicks'.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.16 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'integer32'.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.17 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'octetString'.
|
OctetString | .1.3.6.1.4.1.6527.3.1.2.21.12.1.18 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'ipAddress'. Although
this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. … |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.19 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'objectId'.
|
ObjectIdentifier | .1.3.6.1.4.1.6527.3.1.2.21.12.1.20 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'counter64'.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.21 |
||||||||||||||||||||
|
The value tFilterRSTLastType is 'opaque'.
|
SNMPv2-SMIOpaque | .1.3.6.1.4.1.6527.3.1.2.21.12.1.22 |
||||||||||||||||||||
|
tFilterRSTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.12.1.23 |
||||||||||||||||||||
|
If the last action on the operational state of the destination
i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destin… |
Integer32 Constraints: range: -255-255 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.24 |
||||||||||||||||||||
|
The value of tFilterRSTNextRespIndex indicates the next response index
to be used while creating a row in the tFilterRedirectSNMPRespTable. The value of '-1' means that the maximum number of return values… |
Integer32 Constraints: range: -1--1range: 1-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.21.12.1.25 |
.1.3.6.1.4.1.6527.3.1.2.21.13
·
1 row entry
·
15 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectSNMPRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectSNMPRespTable'
Each row in this table holds the effect of the test on the destination for a specific return value.
Information about action to be taken for a specific destination
when a specific response is received.
when a specific response is received.
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRSTRespId holds the response value received from
the destination. |
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.1 |
||||||||||||||||||
|
This object allows response strings to be specified for a specific
test and the change it will cause to the priority of the destination. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.2 |
||||||||||||||||||
|
tFilterRSTRespAction specifies the type of change that should
be made to the destination priority tFilterRDOperPriority, if the return value is same as tFilterRSTRespId. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.13.1.3 |
||||||||||||||||||
|
tFilterRSTRespPrioChange specifies the amount of change to
be made to the priority of the destination if the tFilterRSTRespAction is either 'increase' or 'decrease'. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.4 |
||||||||||||||||||
|
The object tFilterRSTRespOID holds the OID to be received in the
response. |
ObjectIdentifierr/w | .1.3.6.1.4.1.6527.3.1.2.21.13.1.5 |
||||||||||||||||||
|
tFilterRSTRespType maintains the type of the value to be received.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.13.1.6 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'counter32'.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.7 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'unsigned32'.
|
SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.8 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'timeTicks'.
|
SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.9 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'integer32'.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.10 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'octetString'.
|
OctetStringr/w | .1.3.6.1.4.1.6527.3.1.2.21.13.1.11 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'ipAddress'. Although
this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. … |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.12 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'objectId'.
|
ObjectIdentifierr/w | .1.3.6.1.4.1.6527.3.1.2.21.13.1.13 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'counter64'.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.13.1.14 |
||||||||||||||||||
|
The value tFilterRSTRespType is 'opaque'.
|
SNMPv2-SMIOpaquer/w | .1.3.6.1.4.1.6527.3.1.2.21.13.1.15 |
.1.3.6.1.4.1.6527.3.1.2.21.14
·
1 row entry
·
13 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectURLTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectURLTestTable'
Contains a List of all redirect snmp tests configured on this system.
Information about a specific URL test configured for a destination.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRedirectURLTest holds the name of the URL test.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItem Type Constraints: range: 1..32Description: The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use onl… |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.1 |
||||||||||||
|
tFilterRUTRowStatus allows tests to be created and deleted in the
tFilterRedirectURLTestTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.2 |
||||||||||||
|
This object holds the URL to be probed.
|
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.3 |
||||||||||||
|
The HTTP Version to be used while performing the URL test.
The system by default uses HTTP Version 1.1 until explicitly specified. |
SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.4 |
||||||||||||
|
The value of tFilterRUTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end host. |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.5 |
||||||||||||
|
The value of tFilterRUTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unrespons… |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.6 |
||||||||||||
|
The value of tFilterRUTDropCount specifies the number of
consecutive requests that must fail for the destination to declared unreachable. |
Unsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.7 |
||||||||||||
|
The value of tFilterRUTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test has marked it unreachable. |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.8 |
||||||||||||
|
The value of tFilterRUTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before being used again. |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.9 |
||||||||||||
|
tFilterRUTLastActionTime maintains the time stamp when this test
received a response for a probe sent out. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.10 |
||||||||||||
|
tFilterRUTLastRetCode holds the return code received in the last
response. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.11 |
||||||||||||
|
tFilterRUTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.14.1.12 |
||||||||||||
|
If the last action on the operational state of the destination
i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destin… |
Integer32 Constraints: range: -255-255 |
.1.3.6.1.4.1.6527.3.1.2.21.14.1.13 |
.1.3.6.1.4.1.6527.3.1.2.21.15
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectURLRespTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectURLRespTable'
Each row in this table holds the effect of the test on the destination for a range of return values.
Information about action to be taken for a specific destination
when a return value within the range specified between
tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode
is received.
when a return value within the range specified between
tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode
is received.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tFilterRedirectURLLowRespCode specifies the lower return
code of the range specified by this entry. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.15.1.1 |
||||||||||||
|
tFilterRedirectURLHighRespCode specifies the higher return
code of the range specified by this entry. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.6527.3.1.2.21.15.1.2 |
||||||||||||
|
tFilterRUTRespRowStatus allows the mapping of a range of
return codes returned from a specific test to the change it will cause to the priority of the destination. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.15.1.3 |
||||||||||||
|
If the tFilterRUTRespAction is either 'increase' or 'decrease',
tFilterRUTRespPrioChange specifies the offset to applied to the destination base priority tFilterRDAdminPriority to compute the tFilterRDOperPriority as a … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.15.1.4 |
||||||||||||
|
tFilterRUTRespPrioChange specifies the amount of change
to be made to the priority of the destination if the tFilterRUTRespAction is either 'increase' or 'decrease'. |
Unsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.6527.3.1.2.21.15.1.5 |
.1.3.6.1.4.1.6527.3.1.2.21.16
·
1 row entry
·
8 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tFilterRedirectPingTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tFilterRedirectPingTestTable'
Contains a List of all redirect Ping tests configured on this system.
Information about a specific Ping test configured for a destination.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This object allows tests to be created and deleted in the
tFilterRedirectPingTestTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.1 |
||||||||||||
|
The value of tFilterRPTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end host. |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.2 |
||||||||||||
|
The value of tFilterRPTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unrespons… |
secondsUnsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.3 |
||||||||||||
|
The value of tFilterRPTDropCount specifies the number of
consecutive requests that must fail for the destination to declared unreachable. |
Unsigned32r/w Constraints: range: 1-60 |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.4 |
||||||||||||
|
The value of tFilterRPTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test has marked it unreachable. |
secondsUnsigned32r/w Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.5 |
||||||||||||
|
The value of tFilterRPTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before being used again. |
secondsUnsigned32 Constraints: range: 0-86400 |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.6 |
||||||||||||
|
tFilterRPTLastActionTime maintains the time stamp when this test
received a response for a probe sent out. |
SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… |
.1.3.6.1.4.1.6527.3.1.2.21.16.1.7 |
||||||||||||
|
tFilterRPTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.6527.3.1.2.21.16.1.8 |
.1.3.6.1.4.1.6527.3.1.2.21.17
·
1 row entry
·
3 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tAutoIPFilterEntryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tAutoIPFilterEntryTable'
Defines the Alcatel 7x50 SR series automatic IP filters
for providing, via SNMP, the capability of gathering
information regarding the same.
tAutoIPFilterEntryTable holds a list of all automatic
filter entries being used for filtering.
This table is obsoleted in release 3.0.
Defines an entry in the tAutoIPFilterEntryTable.
Entries are created and deleted in this table by the
system.
Each entry provides information about a single active
automatic filter entry.
…
Entries are created and deleted in this table by the
system.
Each entry provides information about a single active
automatic filter entry.
…
| Column | Syntax | OID |
|---|---|---|
|
tAutoIPFilterIdobsolete
tAutoIPFilterId serves as a primary index and uniquely
identifies an application point such as a routed interface or a SAP. This object is obsoleted in release 3.0. |
TFilterID Constraints: range: 1-65535Description: the identification number of a filter. 0 indicates an invalid filter-id. |
.1.3.6.1.4.1.6527.3.1.2.21.17.1.1 |
|
tAutoIPFilterEntrySourceIpAddrobsolete
tAutoIPFilterEntrySourceIpAddr specifies the source
ip-address and also serves as the secondary index to this table. This object is obsoleted in release 3.0. |
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.6527.3.1.2.21.17.1.2 |
|
tAutoIPFilterEntrySourceIpMaskobsolete
The value of tAutoIPFilterEntrySourceIpMask indicates the number
of bits to be matched in the source ip-address. This object is obsoleted in release 3.0. |
ALCATEL-ENT1-TIMETRA-TC-MIBIpAddressPrefixLength Type Constraints: range: 0..32Description: the number of bits to match in an IP address mask. |
.1.3.6.1.4.1.6527.3.1.2.21.17.1.3 |
tIPv6FilterTable
table.1.3.6.1.4.1.6527.3.1.2.21.18
·
1 row entry
·
5 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tIPv6FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tIPv6FilterTable'
Contains a List of all IPv6 filters configured on this system.
Information about a particular IPv6 Filter entry. Entries are
created/deleted by user. Entries have a presumed StorageType of
nonVolatile.
created/deleted by user. Entries have a presumed StorageType of
nonVolatile.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The value of the object tIPv6FilterId uniquely identifies a
IPv6 filter on this system. |
TIPFilterID Constraints: range: 1-65535Description: the identification number of an IP filter. |
.1.3.6.1.4.1.6527.3.1.2.21.18.1.1 |
||||||||||||
|
The value of the object tIPv6FilterRowStatus specifies
the status of the IPv6 filter. The object allows entries to be created and deleted in the tIPv6FilterTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.18.1.2 |
||||||||||||
|
The value of the object tIPv6FilterScope specifies the
scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can ha… |
TItemScoper/w Type Values:
Description: This textual-convention determines some aspects of an item's behavior regarding creation and use, unused entry garbage collection, and automated promulgation by Element Management System to other systems in the service … |
.1.3.6.1.4.1.6527.3.1.2.21.18.1.3 |
||||||||||||
|
The value of the object tIPv6FilterDescription specifies
a user-provided description for this filter. |
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.18.1.4 |
||||||||||||
|
The value of the object tIPv6FilterDefaultAction specifies
the action to be taken for packets that do not match any of the filter entries. |
TFilterActionr/w Type Values:
Description: action to take on the traffic when no filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forward… |
.1.3.6.1.4.1.6527.3.1.2.21.18.1.5 |
tIPv6FilterParamsTable
table.1.3.6.1.4.1.6527.3.1.2.21.19
·
1 row entry
·
38 columns
Uses the alcatel-ent1 variant from
Command help
/opt/observium/mibs/alcatel-ent1.
Walk tIPv6FilterParamsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-TIMETRA-FILTER-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-TIMETRA-FILTER-MIB::tIPv6FilterParamsTable'
A table of all IPv6 filter match entries for all IPv6 filters.
Information about a particular IPv6 Filter entry.
Every IPv6 Filter can have zero or more IPv6 Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action w…
Every IPv6 Filter can have zero or more IPv6 Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action w…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
This is the secondary index for the entry. Every IPv6 filter can have
multiple entries, therefore every IPv6 filter entry is identified by the tIPv6FilterId and tIPv6FilterParamsIndex. |
TEntryId Type Constraints: range: 0..65535Description: uniquely identifies an entry in a policy or filter table. to facilitate insertion of entries in the tables, we recommend assigning entry IDs by 10s: 10, 20, 30, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.1 |
||||||||||||
|
This object allows entries to be created and deleted in the
tIPv6FilterParamsTable. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.2 |
||||||||||||
|
This object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled. |
TFilterLogIdr/w Type Constraints: range: 0range: 101..199Description: uniquely identifies an entry in the filter log table. 0 indicates an invalid log-id. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.3 |
||||||||||||
|
User-provided description for this filter entry.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTItemDescriptionr/w Type Constraints: range: 0..80Description: Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.4 |
||||||||||||
|
The action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the default for the filter. |
TFilterActionOrDefaultr/w Type Values:
Description: action to take on the traffic when the filter entry matches. when set to drop(1), packets matching the filter entry are dropped. when set to forward(2), packets matching the filter entry are forwar… |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.5 |
||||||||||||
|
The ipv6-address of the nexthop to which the packet should be forwarded
if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.6 |
||||||||||||
|
tIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or
indirectly reachable. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.7 |
||||||||||||
|
The DSCP value that should be remarked in case a packet hits this
filter entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPFilterActionValuer/w Type Constraints: range: -1..255Description: The value of a Differential Services Code Point. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.8 |
||||||||||||
|
tIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking
with the DSCP value. |
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPFilterActionValuer/w Type Constraints: range: -1..255Description: The value of a Differential Services Code Point. -1 means not set. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.9 |
||||||||||||
|
tIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be
remarked on the packet if it hits this filter entry. |
ALCATEL-ENT1-TIMETRA-TC-MIBDot1PPriorityr/w Type Constraints: range: -1..7Description: IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.10 |
||||||||||||
|
IPv6 address to match the source-ip of the packet.
|
INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.11 |
||||||||||||
|
The IPv6 Mask value for this policy IPv6 Filter entry. The mask is
ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr. |
INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.12 |
||||||||||||
|
IPv6 address to match the destination-ip of the packet.
|
INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.13 |
||||||||||||
|
The IPv6 Mask value for this policy IPv6 Filter entry. The mask is
ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr. |
INET-ADDRESS-MIBInetAddressPrefixLengthr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.14 |
||||||||||||
|
IPv6 next header to match. set to -1 to disable matching IPv6 next
header. If the next header is changed the next header specific parameters are reset. For instance if next header is changed from TCP to UDP, then the o… |
ALCATEL-ENT1-TIMETRA-TC-MIBTIpProtocolr/w Type Constraints: range: -2..255Description: IP protocol number. well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.15 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used as per the
description for tIPv6FilterParamsSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.16 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used as per the
description for tIPv6FilterParamsSourcePortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.17 |
||||||||||||
|
The operator specifies the manner in which
tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.18 |
||||||||||||
|
TCP/UDP port value1. The value of this object is used as per the
description for tIPv6FilterParamsDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.19 |
||||||||||||
|
TCP/UDP port value2. The value of this object is used as per the
description for tIPv6FilterParamsDestPortOperator. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortr/w Type Constraints: range: 0..65535Description: The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.20 |
||||||||||||
|
The operator specifies the manner in which tIPFilterParamsDestPortValue1
and tIPFilterParamsDestPortValue2 are to be used. |
ALCATEL-ENT1-TIMETRA-TC-MIBTTcpUdpPortOperatorr/w Type Values:
Description: The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 ---------------------------------------------------- … |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.21 |
||||||||||||
|
DSCP to be matched on the packet.
|
ALCATEL-ENT1-TIMETRA-TC-MIBTDSCPNameOrEmptyr/w Type Constraints: range: 0..32Description: The name of a Differential Services Code Point value. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.22 |
||||||||||||
|
If Enabled, matches a TCP Syn as per value of the object.
|
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.23 |
||||||||||||
|
If Enabled, matches a TCP Ack as per value of the object.
|
TItemMatchr/w Type Values:
Description: when set to off, the item is not matched. when set to false, packets without the item match the filter. when set to true, packets with the item match the filter. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.24 |
||||||||||||
|
Icmp code to be matched. tIPv6FilterParamsIcmpCode complements the
object tIPv6FilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled. |
Integer32r/w Constraints: range: -1-255 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.25 |
||||||||||||
|
Icmp type to be matched. tIPv6FilterParamsIcmpType complements the
object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled. |
Integer32r/w Constraints: range: -1-255 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.26 |
||||||||||||
|
When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling
and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected … |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.27 |
||||||||||||
|
When tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subject… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.28 |
||||||||||||
|
The interface name for the nexthop to which the packet should be
forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case. |
SNMPv2-TCDisplayStringr/w Constraints: range: 0-32Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.29 |
||||||||||||
|
This object indicates the number of times an ingress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.30 |
||||||||||||
|
This object indicates the number of times an egress packet
matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.31 |
||||||||||||
|
tIPv6FilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.32 |
||||||||||||
|
tIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be
used to determine the nexthop. |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.33 |
||||||||||||
|
tIPv6FilterParamsActiveDest indicates the IPv6 address of the active
destination for this IPv6 filter. A value of 0 indicates that there is currently no active destination. |
INET-ADDRESS-MIBInetAddressIPv6 Type Constraints: range: 16 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.34 |
||||||||||||
|
tIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. A… |
ALCATEL-ENT1-TIMETRA-TC-MIBTNamedItemOrEmptyr/w Type Constraints: range: 0..32Description: The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters,… |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.35 |
||||||||||||
|
tIPv6FilterParamsTimeRangeState indicates whether or not the entry
is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPv6Filt… |
TTimeRangeState Type Values:
Description: The textual convention TTimeRangeState is used to indicate the state of an object that is controlled by a time range. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time ra… |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.36 |
||||||||||||
|
The value of tIPv6FilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.37 |
||||||||||||
|
This tIPv6FilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry. |
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.6527.3.1.2.21.19.1.38 |