ALCATEL-ENT1-DA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
81
Rows
81
Columns
687

alaDaUserNetProfileTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUserNetProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUserNetProfileTable'
This table stores the UNP profiles created in the system.
The entries would be mapped to vlan ID which would be used
by device authentication for classifying users.
alaDaUserNetProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1
User Network Profile entry
Column Syntax OID
The name of this profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.1
The VLAN id for this profile.
Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.3
The name of the QoS Policy List name that will be used if this
User Network Profile is applied for a given device along with
alaDaUserNetProfileVlanID.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.4
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.5
The name of the SAA profile that is associated to this profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.6
User Net Profile Mobile Tag .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.7
Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.8
Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.9
Maximum Ingress Depth associated to Bandwidth.
If set to -1, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.10
Maximum Egress Depth associated to Bandwidth.
If set to -1, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.1.1.11

alaDaUNPIpNetRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPIpNetRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPIpNetRuleTable'
A list of IP network address rules.  This is used to match
the InetAddress of a packet to a User Network Profile entry.
alaDaUNPIpNetRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1
An IP network address rule entry.
Column Syntax OID
The IP network address type used for VLAN classification. For now
Only IPv4 is supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.1
The IP network address used for VLAN classification. Only IPv4 is
supported.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.2
The IP network mask applying to the IP network address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.3
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.4
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.5
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.6
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.2.1.7

alaDaUNPMacRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacRuleTable'
A list of MAC address rules.  This is used to match
the MAC Address of a packet to a User Network Profile entry
alaDaUNPMacRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1
A MAC rule entry.
Column Syntax OID
The MAC address used for VLAN classification.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.1
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.2
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.3
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.4
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.3.1.5

alaDaUNPMacRangeRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacRangeRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacRangeRuleTable'
A list of MAC range rules.  This is used to match
the MAC Address Range of a packet to a User Network Profile entry.
alaDaUNPMacRangeRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1
A MAC range rule entry.
Column Syntax OID
The lower bound of MAC address range used for VLAN classification.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.1
The upper bound of MAC address range used for VLAN classification.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.2
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.3
The vlan tag to be used for classification of tagged pkts.
The range states the valid vlan range in the system.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.4
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.5
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.4.1.6

alaDaUNPVlanTagRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVlanTagRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVlanTagRuleTable'
A list of Vlan Tag based classification rules.  This is used to match
the vlan tag in a packet to a User Network Profile entry
alaDaUNPVlanTagRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1
A Vlan Tag rule entry.
Column Syntax OID
The Vlan Tag used for VLAN classification. The range states the valid
Vlan range in the system.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.1
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.2
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.3
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.5.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6 · 1 row entry · 10 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaMacUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaMacUserTable'
A table of MAC address learned on an UNP port.
alaDaMacUserEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1
Non 802.1x supplicant information.
Column Syntax OID
The ifIndex representing the slot and port where the non 802.1x supplicant is learned.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.1
The MAC address of the non 802.1x supplicant.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.2
The Id of the VLAN on which the non 802.1x supplicant is learned.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.3
Authentication status of the non 802.1x supplicant.
Enumeration
Enumerated Values:
1idle
2inProgress
3authenticated
4failed
5failedTimeout
6failedNoServer
7failedNoResources
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.4
The ip address from which the mac user is sending the packets
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.5
The UNP used for classifying the mac user
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.6
The Login time stamp of the mac user
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.7
The authentication type of the mac user
Enumeration
Enumerated Values:
0macAuthentication
1others
2onexAuthentication
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.8
Classification policy under which the non 802.1x supplicant is learned.
AlaDaClassificationPolicyType
Type Values:
1authPassAltUnp
2authPassDefUnp
3authPassSrvUnp
4noAuthMacRuleUnp
5noAuthMacRangeRuleUnp
6noAuthIpRuleUnp
7authFailDefUnp
8authFailMacRuleUnp
9authFailMacRangeRuleUnp
10authFailIpRuleUnp
11authFailRuleDefUnp
12authFailMacRangeVlanTagRuleUnp
13tagAuthFailMacRuleUnp
14tagAuthFailMacVlanTagRuleUnp
15tagAuthFailMacRangeRuleUnp
16tagAuthFailMacRangeVlanTagRuleUnp
17tagAuthFailIpRuleUnp
18tagAuthFailIpVlanTagRuleUnp
19tagAuthFailVlanTagRuleUnp
20tagAuthPassAltUnp
21tagAuthPassDefUnp
22tagAuthPassSrvUnp
23tagMacRuleUnp
24tagMacVlanTagRuleUnp
25tagMacRangeRuleUnp
26tagMacRangeVlanTagRuleUnp
27tagIpRuleUnp
28tagIpVlanTagRuleUnp
29tagVlanTagRuleUnp
30tagRuleDefUnp
31authPassDefUnpBlk
32authFailDefUnpBlk
33authFailRuleDefUnpBlk
34tagAuthPassDefUnpBlk
35tagRuleDefUnpBlk
36authPassSrvUnpTagMismatchBlk
37authPassAltUnpTagMismatchBlk
38authPassDefUnpTagMismatchBlk
39authFailMacRuleUnpTagMismatchBlk
40authFailMacVlanRuleUnpTagMismatchBlk
41authFailMacRangeRuleUnpTagMismatchBlk
42authFailMacRangeVlanRuleUnpTagMismatchBlk
43authFailIpRuleUnpTagMismatchBlk
44authFailIpVlanRuleUnpTagMismatchBlk
45authFailVlanRuleUnpTagMismatchBlk
46defUnpBlk
47authPassSrvUnpBlk
48authPassAltUnpBlk
49authFailMacRuleUnpBlk
50authFailMacRangeRuleUnpBlk
51authFailIpRuleUnpBlk
52tagMacRuleUnpBlk
53tagMacVlanTagRuleUnpBlk
54tagMacRangeRuleUnpBlk
55tagMacRangeVlanTagRuleUnpBlk
56tagIpRuleUnpBlk
57tagIpVlanTagRuleUnpBlk
58tagVlanTagRuleUnpBlk
59authSrvDownUnpTagMismatchBlk
60noMatchingUnpBlk
61trustTag
62authSrvDownUnp
63defUnp
64lpsUnpBlk
65sysDefSpb
66defSpbProfile
67noSpbResource
68tagAuthPassPortMacIpRuleUnp
69tagAuthPassPortMacRuleUnp
70tagAuthPassPortIpRuleUnp
71tagAuthPassGroupMacIpRuleUnp
72tagAuthPassGroupMacRuleUnp
73tagAuthPassGroupIpRuleUnp
74tagAuthPassPortRuleUnp
75tagAuthPassGroupRuleUnp
76tagAuthPassMacVlanRuleUnp
77tagAuthPassMacRuleUnp
78tagAuthPassMacouiRuleUnp
79tagAuthPassMacrangeVlanRuleUnp
80tagAuthPassMacrangeRuleUnp
81tagAuthPassLldpRuleUnp
82tagAuthPassL2authRuleUnp
83tagAuthPassIpVlanRuleUnp
84tagAuthPassIpRuleUnp
85tagAuthPassVlanRuleUnp
86tagAuthPassDmGroupRuleUnp
87tagAuthFailPortMacIpRuleUnp
88tagAuthFailPortMacRuleUnp
89tagAuthFailPortIpRuleUnp
90tagAuthFailGroupMacIpRuleUnp
91tagAuthFailGroupMacRuleUnp
92tagAuthFailGroupIpRuleUnp
93tagAuthFailPortRuleUnp
94tagAuthFailGroupRuleUnp
95tagAuthFailMacouiRuleUnp
96tagAuthFailLldpRuleUnp
97tagAuthFailL2authRuleUnp
98tagAuthFailDmGroupRuleUnp
99tagPortMacIpRuleUnp
100tagPortMacRuleUnp
101tagPortIpRuleUnp
102tagGroupMacIpRuleUnp
103tagGroupMacRuleUnp
104tagGroupIpRuleUnp
105tagPortRuleUnp
106tagGroupRuleUnp
107tagMacouiRuleUnp
108tagLldpRuleUnp
109tagL2authRuleUnp
110tagDmGroupRuleUnp
111authPassPortMacIpRuleUnp
112authPassPortMacRuleUnp
113authPassPortIpRuleUnp
114authPassGroupMacIpRuleUnp
115authPassGroupMacRuleUnp
116authPassGroupIpRuleUnp
117authPassPortRuleUnp
118authPassGroupRuleUnp
119authPassMacRuleUnp
120authPassMacouiRuleUnp
121authPassMacrangeRuleUnp
122authPassLldpRuleUnp
123authPassL2authRuleUnp
124authPassIpRuleUnp
125authPassDmGroupRuleUnp
126authFailPortMacIpRuleUnp
127authFailPortMacRuleUnp
128authFailPortIpRuleUnp
129authFailGroupMacIpRuleUnp
130authFailGroupMacRuleUnp
131authFailGroupIpRuleUnp
132authFailPortRuleUnp
133authFailGroupRuleUnp
134authFailMacouiRuleUnp
135authFailLldpRuleUnp
136authFailL2authRuleUnp
137authFailDmGroupRuleUnp
138noAuthPortMacIpRuleUnp
139noAuthPortMacRuleUnp
140noAuthPortIpRuleUnp
141noAuthGroupMacIpRuleUnp
142noAuthGroupMacRuleUnp
143noAuthGroupIpRuleUnp
144noAuthPortRuleUnp
145noAuthGroupRuleUnp
146noAuthMacouiRuleUnp
147noAuthLldpRuleUnp
148noAuthL2authRuleUnp
149noAuthDmGroupRuleUnp
150authPassPortMacIpRuleUnpTagMismatchBlk
151authPassPortMacRuleUnpTagMismatchBlk
152authPassPortIpRuleUnpTagMismatchBlk
153authPassGroupMacIpRuleUnpTagMismatchBlk
154authPassGroupMacRuleUnpTagMismatchBlk
155authPassGroupIpRuleUnpTagMismatchBlk
156authPassPortRuleUnpTagMismatchBlk
157authPassGroupRuleUnpTagMismatchBlk
158authPassMacVlanRuleUnpTagMismatchBlk
159authPassMacRuleUnpTagMismatchBlk
160authPassMacouiRuleUnpTagMismatchBlk
161authPassMacrangeVlanRuleUnpTagMismatchBlk
162authPassMacrangeRuleUnpTagMismatchBlk
163authPassLldpRuleUnpTagMismatchBlk
164authPassL2authRuleUnpTagMismatchBlk
165authPassIpVlanRuleUnpTagMismatchBlk
166authPassIpRuleUnpTagMismatchBlk
167authPassVlanRuleUnpTagMismatchBlk
168authPassDmGroupRuleUnpTagMismatchBlk
169authFailPortMacIpRuleUnpTagMismatchBlk
170authFailPortMacRuleUnpTagMismatchBlk
171authFailPortIpRuleUnpTagMismatchBlk
172authFailGroupMacIpRuleUnpTagMismatchBlk
173authFailGroupMacRuleUnpTagMismatchBlk
174authFailGroupIpRuleUnpTagMismatchBlk
175authFailPortRuleUnpTagMismatchBlk
176authFailGroupRuleUnpTagMismatchBlk
177authFailMacouiRuleUnpTagMismatchBlk
178authFailLldpRuleUnpTagMismatchBlk
179authFailL2authRuleUnpTagMismatchBlk
180authFailDmGroupRuleUnpTagMismatchBlk
181portMacIpRuleUnpTagMismatchBlk
182portMacRuleUnpTagMismatchBlk
183portIpRuleUnpTagMismatchBlk
184groupMacIpRuleUnpTagMismatchBlk
185groupMacRuleUnpTagMismatchBlk
186groupIpRuleUnpTagMismatchBlk
187portRuleUnpTagMismatchBlk
188groupRuleUnpTagMismatchBlk
189macouiRuleUnpTagMismatchBlk
190lldpRuleUnpTagMismatchBlk
191l2authRuleUnpTagMismatchBlk
192dmGroupRuleUnpTagMismatchBlk
193tagAuthPassExtendedRuleUnp
194tagAuthFailExtendedRuleUnp
195tagExtendedRuleUnp
196authPassExtendedRuleUnp
197authFailExtendedRuleUnp
198noAuthExtendedRuleUnp
199authPassExtendedRuleUnpTagMismatchBlk
200authFailExtendedRuleUnpTagMismatchBlk
201extendedRuleUnpTagMismatchBlk
202lpsStatic
203lpsPseudoStatic
204lpsDupStatic
205authSrvDownEdgeProfileUnp
206byodPauseTimerFilter
207byodServerUnp
208noVxlanResource
209noVxlanResourceAuthSrvDownUnp
210defVxlanProfile
211sysDefVxlan
212cportalEdgeProfilePolicy
213tagAuthPassPortMacIpVlanRuleUnp
214tagAuthPassPortMacVlanRuleUnp
215tagAuthPassPortIpVlanRuleUnp
216tagAuthPassGroupMacIpVlanRuleUnp
217tagAuthPassGroupMacVlanRuleUnp
218tagAuthPassGroupIpVlanRuleUnp
219tagAuthPassPortVlanRuleUnp
220tagAuthPassGroupVlanRuleUnp
221tagAuthPassMacouiVlanRuleUnp
222tagAuthPassL2authVlanRuleUnp
223tagAuthPassDmGroupVlanRuleUnp
224tagAuthFailPortMacIpVlanRuleUnp
225tagAuthFailPortMacVlanRuleUnp
226tagAuthFailPortIpVlanRuleUnp
227tagAuthFailGroupMacIpVlanRuleUnp
228tagAuthFailGroupMacVlanRuleUnp
229tagAuthFailGroupIpVlanRuleUnp
230tagAuthFailPortVlanRuleUnp
231tagAuthFailGroupVlanRuleUnp
232tagAuthFailMacouiVlanRuleUnp
233tagAuthFailL2authVlanRuleUnp
234tagAuthFailDmGroupVlanRuleUnp
235tagPortMacIpVlanRuleUnp
236tagPortMacVlanRuleUnp
237tagPortIpVlanRuleUnp
238tagGroupMacIpVlanRuleUnp
239tagGroupMacVlanRuleUnp
240tagGroupIpVlanRuleUnp
241tagPortVlanRuleUnp
242tagGroupVlanRuleUnp
243tagMacouiVlanRuleUnp
244tagL2authVlanRuleUnp
245tagDmGroupVlanRuleUnp
246authPassPortMacIpVlanRuleUnp
247authPassPortMacVlanRuleUnp
248authPassPortIpVlanRuleUnp
249authPassGroupMacIpVlanRuleUnp
250authPassGroupMacVlanRuleUnp
251authPassGroupIpVlanRuleUnp
252authPassPortVlanRuleUnp
253authPassGroupVlanRuleUnp
254authPassMacouiVlanRuleUnp
255authPassL2authVlanRuleUnp
256authPassDmGroupVlanRuleUnp
257authFailPortMacIpVlanRuleUnp
258authFailPortMacVlanRuleUnp
259authFailPortIpVlanRuleUnp
260authFailGroupMacIpVlanRuleUnp
261authFailGroupMacVlanRuleUnp
262authFailGroupIpVlanRuleUnp
263authFailPortVlanRuleUnp
264authFailGroupVlanRuleUnp
265authFailMacouiVlanRuleUnp
266authFailL2authVlanRuleUnp
267authFailDmGroupVlanRuleUnp
268noAuthPortMacIpVlanRuleUnp
269noAuthPortMacVlanRuleUnp
270noAuthPortIpVlanRuleUnp
271noAuthGroupMacIpVlanRuleUnp
272noAuthGroupMacVlanRuleUnp
273noAuthGroupIpVlanRuleUnp
274noAuthPortVlanRuleUnp
275noAuthGroupVlanRuleUnp
276noAuthMacouiVlanRuleUnp
277noAuthL2authVlanRuleUnp
278noAuthDmGroupVlanRuleUnp
279authPassPortMacIpVlanRuleUnpTagMismatchBlk
280authPassPortMacVlanRuleUnpTagMismatchBlk
281authPassPortIpVlanRuleUnpTagMismatchBlk
282authPassGroupMacIpVlanRuleUnpTagMismatchBlk
283authPassGroupMacVlanRuleUnpTagMismatchBlk
284authPassGroupIpVlanRuleUnpTagMismatchBlk
285authPassPortVlanRuleUnpTagMismatchBlk
286authPassGroupVlanRuleUnpTagMismatchBlk
287authPassMacouiVlanRuleUnpTagMismatchBlk
288authPassL2authVlanRuleUnpTagMismatchBlk
289authPassDmGroupVlanRuleUnpTagMismatchBlk
290authFailPortMacIpVlanRuleUnpTagMismatchBlk
291authFailPortMacVlanRuleUnpTagMismatchBlk
292authFailPortIpVlanRuleUnpTagMismatchBlk
293authFailGroupMacIpVlanRuleUnpTagMismatchBlk
294authFailGroupMacVlanRuleUnpTagMismatchBlk
295authFailGroupIpVlanRuleUnpTagMismatchBlk
296authFailPortVlanRuleUnpTagMismatchBlk
297authFailGroupVlanRuleUnpTagMismatchBlk
298authFailMacouiVlanRuleUnpTagMismatchBlk
299authFailL2authVlanRuleUnpTagMismatchBlk
300authFailDmGroupVlanRuleUnpTagMismatchBlk
301portMacIpVlanRuleUnpTagMismatchBlk
302portMacVlanRuleUnpTagMismatchBlk
303portIpVlanRuleUnpTagMismatchBlk
304groupMacIpVlanRuleUnpTagMismatchBlk
305groupMacVlanRuleUnpTagMismatchBlk
306groupIpVlanRuleUnpTagMismatchBlk
307portVlanRuleUnpTagMismatchBlk
308groupVlanRuleUnpTagMismatchBlk
309macouiVlanRuleUnpTagMismatchBlk
310l2authVlanRuleUnpTagMismatchBlk
311dmGroupVlanRuleUnpTagMismatchBlk
312cportalPauseTimerFilter
313noSpbResourceAuthSrvDownUnp
314authSrvDowniVoiceUnp
315authSrvDownVoiceUnpTagMismatchBlk
316sysMacCollision
317noGreResource
318ovEnforced
319tcamTtiRuleExhaust
Description:
This policy type is the classification policy used to classify
a device onto the system.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.9
The mac user name
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.6.1.10
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7 · 1 row entry · 55 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortTable'
A table of system level information for each port
supported by the Port Access Entity.  An entry appears
in this table for each port of this system.
alaDaUNPPortEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1
Each of these entries represents a user port on which UNP is enabled
and their configuration.
Column Syntax OID
The interface index of the UNP enabled port.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.1
The default UNP name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.2
The Pass alternate UNP name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.4
The flag to indicate if MAC AUTH is enabled on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.5
The flag to indicate if Classification is enabled on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.6
The flag to indicate whether the vlan tag in the incoming packet
could be used for classifying the user when mac authentication fails
and classification rules dont match.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.7
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.8
The Customer Domain that this port belongs to. Default is on domain 0.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.9
The object defines the port as UNP enable bridge-port(1), spb-access-port(2), edge-port(3) and vxlan-access-port(4).
Enumerationr/w
Enumerated Values:
1bridgePort
2spbAccessPort
3edge
4vxlanAccessPort
5accessPort
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.10
The Pass alternate Spb Profile name. This is to be used on a successful authentication
and there is no SPB profile passed back from the Authentication Server.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.11
The default Spb Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.12
The default Edge Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.13
Mac Authenticattion Edge Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.14
802.1X Pass Alternate Edge Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.15
flag to indicate 802.1X Authentication .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.16
flag to indicate if 802.1X Authentication
tx-period is configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.17
802.1X Tx periaod .
secondsInteger32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.18
flag to indicate if 802.1X Authentication
supp-timeout is configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.19
802.1X Authenttication Supp Timeout .
secondsInteger32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.20
flag to indicate if 802.1X Authentication
max-req is configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.21
802.1X Authenttication Max Req .
Integer32r/w
Constraints:
range: 0-3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.22
Associated Group ID .
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.23
Associated Aaa Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.24
Associated Edge Template .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.25
The flag to indicate whether port-bounce is enabled or disabled on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.26
Failure Policy type.
Enumerationr/w
Enumerated Values:
1default
2macAuth
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.27
Flag to indicate Bypass enable status on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.28
Flag to indicate Allow Eap on port.
Enumerationr/w
Enumerated Values:
1pass
2fail
3noauth
4none
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.29
The current value of the administrative controlled
directions parameter for the Port.
Enumerationr/w
Enumerated Values:
1both
2in
3noVal
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.30
The operational value of the administrative controlled
directions parameter for the Port.
Enumeration
Enumerated Values:
1both
2in
3noVal
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.31
802.1X Pass Alternate Vlan Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.32
802.1X Pass Alternate SPB Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.33
802.1X Pass Alternate VXLAN Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.34
The Pass alternate VXLAN Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.35
The default VXLAN Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.36
Configuration is made by admin or auto-fabric on
this interface
Enumeration
Enumerated Values:
1admin
2autoFabric
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.37
Current Ingress BW active on UNP Port in Kbps.
If value is -1, it means no Ingress Bandwidth exists on port.
kilobits per secondInteger32
Constraints:
range: -1-10485760
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.38
Application responsible for setting Ingress BW on port.
Enumeration
Enumerated Values:
1notApplicable
2unp
3qos
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.39
Current Egress BW active on UNP Port in Kbps.
If value is -1, it means no Egress Bandwidth exists on port.
kilobits per secondInteger32
Constraints:
range: -1-10485760
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.40
Application responsible for setting Egress BW on port.
Enumeration
Enumerated Values:
1notApplicable
2unp
3qos
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.41
Ingress Depth applied on the port.
Integer32
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.42
Egress Depth applied on the port.
Integer32
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.43
The name of the UNP Profile responsible for setting current Ingress
Bandwidth limitation on port. Applicable only if current bandwidth set is
due to UNP classification on port.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.44
The name of the UNP Profile responsible for setting current Egress
Bandwidth limitation on port. Applicable only if current bandwidth set is
due to UNP classification on port
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.45
UNP force L3 learning status on the UNP Port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.46
Port-Bounce associated with UNP force L3 learning status on the UNP Port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.47
802.1X Pass Alternate Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.48
Associated port Template .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.49
The Domain that this port belongs to. Default is on domain 0.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.50
The flag to indicate if admin state is enabled on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.51
Indicates the type of dynamic service for the port.
Dynamic Service type SPB/VXLAN are applicable for Access type UNP port.
Enumerationr/w
Enumerated Values:
1none
2spb
3vxlan
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.52
The Port type in PVLAN Domain.
Enumeration
Enumerated Values:
1none
2community
3isolated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.53
Service L2-Profile to be bound to UNP Dynamic Access Ports
for controlling L2-Traffic passing through that port.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.54
The flag to indicate whether AP-mode is enabled or disabled on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.7.1.55
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9 · 1 row entry · 39 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaMacVlanUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaMacVlanUserTable'
A table of non 802.1x supplicants learned on 802.1x authenticated ports.
alaDaMacVlanUserEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1
Non 802.1x supplicant information.
Column Syntax OID
The ifIndex representing the slot and port where the non 802.1x supplicant is learned.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.1
The MAC address of the non 802.1x supplicant.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.2
The Id of the VLAN on which the non 802.1x supplicant is learned.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.3
Authentication status of the non 802.1x supplicant.
Enumeration
Enumerated Values:
1idle
2inProgress
3authenticated
4failed
5failedTimeout
6failedNoServer
7failedNoResources
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.4
The type of the IP address of the user. For now
only IPv4 is supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.5
The ip address from which the mac user is sending the packets
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.6
The UNP used for classifying the mac user
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.7
The Login time stamp of the mac user
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.8
The authentication type of the mac user
Enumeration
Enumerated Values:
0macAuthentication
1others
2onexAuthentication
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.9
Classification policy under which the non 802.1x supplicant is learned.
AlaDaClassificationPolicyType
Type Values:
1authPassAltUnp
2authPassDefUnp
3authPassSrvUnp
4noAuthMacRuleUnp
5noAuthMacRangeRuleUnp
6noAuthIpRuleUnp
7authFailDefUnp
8authFailMacRuleUnp
9authFailMacRangeRuleUnp
10authFailIpRuleUnp
11authFailRuleDefUnp
12authFailMacRangeVlanTagRuleUnp
13tagAuthFailMacRuleUnp
14tagAuthFailMacVlanTagRuleUnp
15tagAuthFailMacRangeRuleUnp
16tagAuthFailMacRangeVlanTagRuleUnp
17tagAuthFailIpRuleUnp
18tagAuthFailIpVlanTagRuleUnp
19tagAuthFailVlanTagRuleUnp
20tagAuthPassAltUnp
21tagAuthPassDefUnp
22tagAuthPassSrvUnp
23tagMacRuleUnp
24tagMacVlanTagRuleUnp
25tagMacRangeRuleUnp
26tagMacRangeVlanTagRuleUnp
27tagIpRuleUnp
28tagIpVlanTagRuleUnp
29tagVlanTagRuleUnp
30tagRuleDefUnp
31authPassDefUnpBlk
32authFailDefUnpBlk
33authFailRuleDefUnpBlk
34tagAuthPassDefUnpBlk
35tagRuleDefUnpBlk
36authPassSrvUnpTagMismatchBlk
37authPassAltUnpTagMismatchBlk
38authPassDefUnpTagMismatchBlk
39authFailMacRuleUnpTagMismatchBlk
40authFailMacVlanRuleUnpTagMismatchBlk
41authFailMacRangeRuleUnpTagMismatchBlk
42authFailMacRangeVlanRuleUnpTagMismatchBlk
43authFailIpRuleUnpTagMismatchBlk
44authFailIpVlanRuleUnpTagMismatchBlk
45authFailVlanRuleUnpTagMismatchBlk
46defUnpBlk
47authPassSrvUnpBlk
48authPassAltUnpBlk
49authFailMacRuleUnpBlk
50authFailMacRangeRuleUnpBlk
51authFailIpRuleUnpBlk
52tagMacRuleUnpBlk
53tagMacVlanTagRuleUnpBlk
54tagMacRangeRuleUnpBlk
55tagMacRangeVlanTagRuleUnpBlk
56tagIpRuleUnpBlk
57tagIpVlanTagRuleUnpBlk
58tagVlanTagRuleUnpBlk
59authSrvDownUnpTagMismatchBlk
60noMatchingUnpBlk
61trustTag
62authSrvDownUnp
63defUnp
64lpsUnpBlk
65sysDefSpb
66defSpbProfile
67noSpbResource
68tagAuthPassPortMacIpRuleUnp
69tagAuthPassPortMacRuleUnp
70tagAuthPassPortIpRuleUnp
71tagAuthPassGroupMacIpRuleUnp
72tagAuthPassGroupMacRuleUnp
73tagAuthPassGroupIpRuleUnp
74tagAuthPassPortRuleUnp
75tagAuthPassGroupRuleUnp
76tagAuthPassMacVlanRuleUnp
77tagAuthPassMacRuleUnp
78tagAuthPassMacouiRuleUnp
79tagAuthPassMacrangeVlanRuleUnp
80tagAuthPassMacrangeRuleUnp
81tagAuthPassLldpRuleUnp
82tagAuthPassL2authRuleUnp
83tagAuthPassIpVlanRuleUnp
84tagAuthPassIpRuleUnp
85tagAuthPassVlanRuleUnp
86tagAuthPassDmGroupRuleUnp
87tagAuthFailPortMacIpRuleUnp
88tagAuthFailPortMacRuleUnp
89tagAuthFailPortIpRuleUnp
90tagAuthFailGroupMacIpRuleUnp
91tagAuthFailGroupMacRuleUnp
92tagAuthFailGroupIpRuleUnp
93tagAuthFailPortRuleUnp
94tagAuthFailGroupRuleUnp
95tagAuthFailMacouiRuleUnp
96tagAuthFailLldpRuleUnp
97tagAuthFailL2authRuleUnp
98tagAuthFailDmGroupRuleUnp
99tagPortMacIpRuleUnp
100tagPortMacRuleUnp
101tagPortIpRuleUnp
102tagGroupMacIpRuleUnp
103tagGroupMacRuleUnp
104tagGroupIpRuleUnp
105tagPortRuleUnp
106tagGroupRuleUnp
107tagMacouiRuleUnp
108tagLldpRuleUnp
109tagL2authRuleUnp
110tagDmGroupRuleUnp
111authPassPortMacIpRuleUnp
112authPassPortMacRuleUnp
113authPassPortIpRuleUnp
114authPassGroupMacIpRuleUnp
115authPassGroupMacRuleUnp
116authPassGroupIpRuleUnp
117authPassPortRuleUnp
118authPassGroupRuleUnp
119authPassMacRuleUnp
120authPassMacouiRuleUnp
121authPassMacrangeRuleUnp
122authPassLldpRuleUnp
123authPassL2authRuleUnp
124authPassIpRuleUnp
125authPassDmGroupRuleUnp
126authFailPortMacIpRuleUnp
127authFailPortMacRuleUnp
128authFailPortIpRuleUnp
129authFailGroupMacIpRuleUnp
130authFailGroupMacRuleUnp
131authFailGroupIpRuleUnp
132authFailPortRuleUnp
133authFailGroupRuleUnp
134authFailMacouiRuleUnp
135authFailLldpRuleUnp
136authFailL2authRuleUnp
137authFailDmGroupRuleUnp
138noAuthPortMacIpRuleUnp
139noAuthPortMacRuleUnp
140noAuthPortIpRuleUnp
141noAuthGroupMacIpRuleUnp
142noAuthGroupMacRuleUnp
143noAuthGroupIpRuleUnp
144noAuthPortRuleUnp
145noAuthGroupRuleUnp
146noAuthMacouiRuleUnp
147noAuthLldpRuleUnp
148noAuthL2authRuleUnp
149noAuthDmGroupRuleUnp
150authPassPortMacIpRuleUnpTagMismatchBlk
151authPassPortMacRuleUnpTagMismatchBlk
152authPassPortIpRuleUnpTagMismatchBlk
153authPassGroupMacIpRuleUnpTagMismatchBlk
154authPassGroupMacRuleUnpTagMismatchBlk
155authPassGroupIpRuleUnpTagMismatchBlk
156authPassPortRuleUnpTagMismatchBlk
157authPassGroupRuleUnpTagMismatchBlk
158authPassMacVlanRuleUnpTagMismatchBlk
159authPassMacRuleUnpTagMismatchBlk
160authPassMacouiRuleUnpTagMismatchBlk
161authPassMacrangeVlanRuleUnpTagMismatchBlk
162authPassMacrangeRuleUnpTagMismatchBlk
163authPassLldpRuleUnpTagMismatchBlk
164authPassL2authRuleUnpTagMismatchBlk
165authPassIpVlanRuleUnpTagMismatchBlk
166authPassIpRuleUnpTagMismatchBlk
167authPassVlanRuleUnpTagMismatchBlk
168authPassDmGroupRuleUnpTagMismatchBlk
169authFailPortMacIpRuleUnpTagMismatchBlk
170authFailPortMacRuleUnpTagMismatchBlk
171authFailPortIpRuleUnpTagMismatchBlk
172authFailGroupMacIpRuleUnpTagMismatchBlk
173authFailGroupMacRuleUnpTagMismatchBlk
174authFailGroupIpRuleUnpTagMismatchBlk
175authFailPortRuleUnpTagMismatchBlk
176authFailGroupRuleUnpTagMismatchBlk
177authFailMacouiRuleUnpTagMismatchBlk
178authFailLldpRuleUnpTagMismatchBlk
179authFailL2authRuleUnpTagMismatchBlk
180authFailDmGroupRuleUnpTagMismatchBlk
181portMacIpRuleUnpTagMismatchBlk
182portMacRuleUnpTagMismatchBlk
183portIpRuleUnpTagMismatchBlk
184groupMacIpRuleUnpTagMismatchBlk
185groupMacRuleUnpTagMismatchBlk
186groupIpRuleUnpTagMismatchBlk
187portRuleUnpTagMismatchBlk
188groupRuleUnpTagMismatchBlk
189macouiRuleUnpTagMismatchBlk
190lldpRuleUnpTagMismatchBlk
191l2authRuleUnpTagMismatchBlk
192dmGroupRuleUnpTagMismatchBlk
193tagAuthPassExtendedRuleUnp
194tagAuthFailExtendedRuleUnp
195tagExtendedRuleUnp
196authPassExtendedRuleUnp
197authFailExtendedRuleUnp
198noAuthExtendedRuleUnp
199authPassExtendedRuleUnpTagMismatchBlk
200authFailExtendedRuleUnpTagMismatchBlk
201extendedRuleUnpTagMismatchBlk
202lpsStatic
203lpsPseudoStatic
204lpsDupStatic
205authSrvDownEdgeProfileUnp
206byodPauseTimerFilter
207byodServerUnp
208noVxlanResource
209noVxlanResourceAuthSrvDownUnp
210defVxlanProfile
211sysDefVxlan
212cportalEdgeProfilePolicy
213tagAuthPassPortMacIpVlanRuleUnp
214tagAuthPassPortMacVlanRuleUnp
215tagAuthPassPortIpVlanRuleUnp
216tagAuthPassGroupMacIpVlanRuleUnp
217tagAuthPassGroupMacVlanRuleUnp
218tagAuthPassGroupIpVlanRuleUnp
219tagAuthPassPortVlanRuleUnp
220tagAuthPassGroupVlanRuleUnp
221tagAuthPassMacouiVlanRuleUnp
222tagAuthPassL2authVlanRuleUnp
223tagAuthPassDmGroupVlanRuleUnp
224tagAuthFailPortMacIpVlanRuleUnp
225tagAuthFailPortMacVlanRuleUnp
226tagAuthFailPortIpVlanRuleUnp
227tagAuthFailGroupMacIpVlanRuleUnp
228tagAuthFailGroupMacVlanRuleUnp
229tagAuthFailGroupIpVlanRuleUnp
230tagAuthFailPortVlanRuleUnp
231tagAuthFailGroupVlanRuleUnp
232tagAuthFailMacouiVlanRuleUnp
233tagAuthFailL2authVlanRuleUnp
234tagAuthFailDmGroupVlanRuleUnp
235tagPortMacIpVlanRuleUnp
236tagPortMacVlanRuleUnp
237tagPortIpVlanRuleUnp
238tagGroupMacIpVlanRuleUnp
239tagGroupMacVlanRuleUnp
240tagGroupIpVlanRuleUnp
241tagPortVlanRuleUnp
242tagGroupVlanRuleUnp
243tagMacouiVlanRuleUnp
244tagL2authVlanRuleUnp
245tagDmGroupVlanRuleUnp
246authPassPortMacIpVlanRuleUnp
247authPassPortMacVlanRuleUnp
248authPassPortIpVlanRuleUnp
249authPassGroupMacIpVlanRuleUnp
250authPassGroupMacVlanRuleUnp
251authPassGroupIpVlanRuleUnp
252authPassPortVlanRuleUnp
253authPassGroupVlanRuleUnp
254authPassMacouiVlanRuleUnp
255authPassL2authVlanRuleUnp
256authPassDmGroupVlanRuleUnp
257authFailPortMacIpVlanRuleUnp
258authFailPortMacVlanRuleUnp
259authFailPortIpVlanRuleUnp
260authFailGroupMacIpVlanRuleUnp
261authFailGroupMacVlanRuleUnp
262authFailGroupIpVlanRuleUnp
263authFailPortVlanRuleUnp
264authFailGroupVlanRuleUnp
265authFailMacouiVlanRuleUnp
266authFailL2authVlanRuleUnp
267authFailDmGroupVlanRuleUnp
268noAuthPortMacIpVlanRuleUnp
269noAuthPortMacVlanRuleUnp
270noAuthPortIpVlanRuleUnp
271noAuthGroupMacIpVlanRuleUnp
272noAuthGroupMacVlanRuleUnp
273noAuthGroupIpVlanRuleUnp
274noAuthPortVlanRuleUnp
275noAuthGroupVlanRuleUnp
276noAuthMacouiVlanRuleUnp
277noAuthL2authVlanRuleUnp
278noAuthDmGroupVlanRuleUnp
279authPassPortMacIpVlanRuleUnpTagMismatchBlk
280authPassPortMacVlanRuleUnpTagMismatchBlk
281authPassPortIpVlanRuleUnpTagMismatchBlk
282authPassGroupMacIpVlanRuleUnpTagMismatchBlk
283authPassGroupMacVlanRuleUnpTagMismatchBlk
284authPassGroupIpVlanRuleUnpTagMismatchBlk
285authPassPortVlanRuleUnpTagMismatchBlk
286authPassGroupVlanRuleUnpTagMismatchBlk
287authPassMacouiVlanRuleUnpTagMismatchBlk
288authPassL2authVlanRuleUnpTagMismatchBlk
289authPassDmGroupVlanRuleUnpTagMismatchBlk
290authFailPortMacIpVlanRuleUnpTagMismatchBlk
291authFailPortMacVlanRuleUnpTagMismatchBlk
292authFailPortIpVlanRuleUnpTagMismatchBlk
293authFailGroupMacIpVlanRuleUnpTagMismatchBlk
294authFailGroupMacVlanRuleUnpTagMismatchBlk
295authFailGroupIpVlanRuleUnpTagMismatchBlk
296authFailPortVlanRuleUnpTagMismatchBlk
297authFailGroupVlanRuleUnpTagMismatchBlk
298authFailMacouiVlanRuleUnpTagMismatchBlk
299authFailL2authVlanRuleUnpTagMismatchBlk
300authFailDmGroupVlanRuleUnpTagMismatchBlk
301portMacIpVlanRuleUnpTagMismatchBlk
302portMacVlanRuleUnpTagMismatchBlk
303portIpVlanRuleUnpTagMismatchBlk
304groupMacIpVlanRuleUnpTagMismatchBlk
305groupMacVlanRuleUnpTagMismatchBlk
306groupIpVlanRuleUnpTagMismatchBlk
307portVlanRuleUnpTagMismatchBlk
308groupVlanRuleUnpTagMismatchBlk
309macouiVlanRuleUnpTagMismatchBlk
310l2authVlanRuleUnpTagMismatchBlk
311dmGroupVlanRuleUnpTagMismatchBlk
312cportalPauseTimerFilter
313noSpbResourceAuthSrvDownUnp
314authSrvDowniVoiceUnp
315authSrvDownVoiceUnpTagMismatchBlk
316sysMacCollision
317noGreResource
318ovEnforced
319tcamTtiRuleExhaust
Description:
This policy type is the classification policy used to classify
a device onto the system.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.10
Source of Learning. Informs whether the Mac was learnt locally or through remote.
Enumeration
Enumerated Values:
1local
2remote
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.11
The UNP used for classifying the mac user
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.12
The UNP used for classifying the mac user role
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.13
The mac user role source
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.14
The mac vlan user auth fail reason.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.15
The mac vlan user auth retry count.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.16
The mac vlan user auth server ip address.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.17
The mac vlan user auth server ip address.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.18
The mac vlan user auth server ip address.
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.19
The mac vlan user auth server ip address.
Enumeration
Enumerated Values:
1notApplicable
2pass
3fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.20
The mac vlan user auth server ip address.
Enumeration
Enumerated Values:
1notApplicable
2pass
3fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.21
The mac vlan user auth server ip address.
Enumeration
Enumerated Values:
1notApplicable
2pass
3fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.22
The mac vlan user auth server ip address.
Enumeration
Enumerated Values:
1notApplicable
2pass
3fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.23
The type of the IP address of the user. For now
only IPv4 is supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.24
The authentication server ip address used to
authentication the user.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.25
The authentication server name (configured in AAA)
used for the latest authentication session of the user.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.26
The RADIUS server message displayed to the user. In case of successful
authentication the information returned in the RADIUS Reply-Message
attribute is displayed to the user, otherwise the reason for failure
is display…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.27
The mac vlan user redirection URL.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.28
SIP call type status of the non 802.1x supplicant.
Enumeration
Enumerated Values:
1normalCall
2emergencyCall
3notInCall
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.29
SIP media type status of the non 802.1x supplicant.
Enumeration
Enumerated Values:
1other
2audio
3video
4none
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.30
The UNP profile returned from the Authentication
server. It also indicates if the profile is configured
in the system or not.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.31
Service type of UNP user.
Enumeration
Enumerated Values:
1bridge
2spbAccess
3edge
4vxlanAccess
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.32
Service ID assigned to of UNP user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.33
Interface Index of the Service SAP-ID assigned to the UNP users.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.34
Encapsulation Value of the Service SAP-ID assigned to of UNP user.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapVal
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.35
VNID assigned to the VXLAN UNP user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.36
I-SID assigned to the SPB UNP user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.37
BVLAN ID assigned to the SPB UNP user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.38
The mac vlan user Kerberos authentication status.
Enumeration
Enumerated Values:
1notApplicable
2pass
3fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.9.1.39
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUnpCustomerDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUnpCustomerDomainTable'
This table creates and deletes the UNP group within a switch.
alaDaUnpCustomerDomainEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1
UNP Group: entry
Column Syntax OID
The Customer Domain ID. Domain ID zero (0) is the default and is always present in the switch.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.1
A field to provide meaningful description of the Customer Domain for easy identification of the domain.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.11.1.3

alaDaSpbProfileTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12 · 1 row entry · 10 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaSpbProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaSpbProfileTable'
This table stores the Service Classification profiles created in the system.
The entries provides information to classify device in the Service domain.
alaDaSpbProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1
Service Classification Profile entry
Column Syntax OID
The name of this profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.1
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.2
The name of the QoS Policy List name that will be used if this
User Network Profile is applied for a given device along with
alaDaSpbProfileVlanID.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.3
The object represnet the I-SID that is to be dynamically created when
alaDaSpbProfileServiceID does not exist in the system and must be
used along with alaDaSpbProfileBVlan.
Unsigned32r/w
Constraints:
range: 256-16777214
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.4
The Backbone VLAN ID (BVLAN) used for the I-SID specified in alaDaSpbProfileIsid.
This object must be specified along with alaDaSpbProfileIsid.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.5
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.6
To configure the multicast replication mode for each service:
Head-end(1) where a non-unicast packet entering the SAP port
is replicated once for each receiver in the b-domain using its
unicast BMAC.
Tandem(2) where a n…
Enumerationr/w
Enumerated Values:
1headend
2tandem
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.7
To enable/disable the vlan translation for all the SAPs configured
in this service if the corresponding access ports for the SAPs also
has the vlan translation enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.8
SPB Profile Mobile Tag .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.9
Configuration is made by admin or auto-fabric on
this profile
Enumeration
Enumerated Values:
1admin
2autoFabric
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.12.1.10
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainEvbGpIdRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainEvbGpIdRuleTable'
A list of EVB group ID based classification rules.  This is used to match
the EVB Group ID passed from EVB to a User Network Profile entry
alaDaUNPCustDomainEvbGpIdRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1
A EVB Group ID rule entry.
Column Syntax OID
The UNP Customer Domain ID that will be used for profile lookup.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.1
The EVB Group ID used for profile lookup.
Unsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.2
The VLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.3
The SBP profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.4
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.5
The VXLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.13.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainVlanTagRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainVlanTagRuleTable'
A list of Customer Domain and Vlan Tag based classification rules.  This is used to match
the vlan tag in a packet and the port's UNP Customer Domain to a User Network Profile entry
alaDaUNPCustDomainVlanTagRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1
A Vlan Tag rule entry.
Column Syntax OID
The UNP Customer Domain ID for profile lookup.
Integer32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.1
The VLAN Tag used for VLAN classification. The range states the valid
VLAN range in the system. The VLAN Tag is of the Q-in-Q VLAN Tag
format, where the value of the outer 802.1Q VLAN ID is encoded in the
least signif…
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.2
The VLAN profile name in the User Network Profile Table to be applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.3
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.4
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.6
This object specify the tag position to apply this Vlan Tag rule for
double tagged frames.
Enumerationr/w
Enumerated Values:
0notApplicable
1outerTag
2innerTag
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.7
The VXLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.8
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.9
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.10
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.14.1.11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15 · 1 row entry · 14 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainIpNetRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainIpNetRuleTable'
A list of IP network address rules.  This is used to match
the InetAddress of a packet to a User Network Profile entry.
alaDaUNPCustDomainIpNetRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1
An IP network address rule entry.
Column Syntax OID
The UNP Customer Domain ID for profile lookup.
Integer32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.1
The IP network address type used for VLAN classification. For now
Only IPv4 is supported.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.2
The IP network address used for VLAN classification. Only IPv4 is
supported.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.3
The IP network mask applying to the IP network address.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.4
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.5
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated.
The VLAN Tag is of the Q-in-Q VLAN Tag format, where the value of the
outer 802.1Q VLAN ID is encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.6
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.7
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.8
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.9
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.10
The VXLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.11
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.12
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.13
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.15.1.14
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16 · 1 row entry · 12 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainMacRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainMacRuleTable'
A list of MAC address rules.  This is used to match
the MAC Address of a packet to a User Network Profile entry
alaDaUNPCustDomainMacRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1
A MAC rule entry.
Column Syntax OID
The UNP Customer Domain ID for profile lookup.
Integer32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.1
The MAC address used for VLAN classification.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.2
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.3
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of
the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q
VLAN ID is encoded in the le…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.4
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.5
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.6
The SBP profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.7
The SBP profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.8
The VXLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.9
The profile name to be applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.10
The profile name to be applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.11
The profile name to be applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.16.1.12
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17 · 1 row entry · 13 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainMacRangeRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainMacRangeRuleTable'
A list of MAC range rules.  This is used to match
the MAC Address Range of a packet to a User Network Profile entry.
alaDaUNPCustDomainMacRangeRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1
A MAC range rule entry.
Column Syntax OID
The UNP Customer Domain ID for profile lookup.
Integer32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.1
The lower bound of MAC address range used for VLAN classification.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.2
The upper bound of MAC address range used for VLAN classification.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.3
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.4
The VLAN Tag to be used for classification of tagged pkts.
The range states the valid VLAN range in the system.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN tag is of the
Q-in-Q VLAN Tag format, where the val…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.5
Row Status for creating/deleting rules.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.6
Result of MCLAG Consistency Check. All rows will be created as local.
Actual status will be set through remote chassis synchronization.
AlaMultiChassisConfigStatus
Type Values:
1local
2sync
3outOfSync
Description:
The status of Multi-Chassis consistency check. If no MCLAG involved
then status is local to the switch.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.7
The SBP profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.8
The Edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.9
The VXLAN profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.10
The profile name to be appiled.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.11
The profile name to be appiled.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.12
The profile name to be appiled.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.17.1.13
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaSaaProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaSaaProfileTable'
This table stores the SAA Performance Monitoring profiles 
that holds the Latency and Jitter Threshold of a network connection.
alaDaSaaProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1
Service Classification Profile entry
Column Syntax OID
The name of this profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.1
The object holds the Latency Threshold. A value of zero (0) means no threshold
Integer32r/w
Constraints:
range: 0-1000000
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.4
The object holds the Jitter Threshold. A value of zero (0) means no threshold
Integer32r/w
Constraints:
range: 0-1000000
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.5
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.18.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaCPortalAuthPassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaCPortalAuthPassTable'
Current Rate Limit Table On 8021x Port
alaDaCPortalAuthPassEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1
Captive Portal Auth Pass Enty
Column Syntax OID
Captive Portal Authenticated Pass Domain Name.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.1
Captive Portal Authenticated Pass Realm
Enumerationr/w
Enumerated Values:
1prefix
2suffix
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.2
Captive Portal Authenticated Policy List Name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.3
This object allows entries to be created and deleted in the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.4
Captive Portal Authenticated UNP Profile Name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.5
Captive Portal Global UNP Profile Status
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.2.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaCPortalProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaCPortalProfTable'
Table contain Captive Portal profiles
alaDaCPortalProfEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1
Each entry defines Captive portal profile
Column Syntax OID
Captive Portal Profile name .
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.1
Captive Portal Profile Mode
Enumerationr/w
Enumerated Values:
1internal
2external
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.2
Captive Portal's Redirect Url upon successful authentication.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-63
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.3
Number of retries for the Captive Portal Profile to provide the user
credential before the software will classify the user to the failed
policy according the the alaCaptivePortalPolicy.
Integer32r/w
Constraints:
range: 1-99
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.4
Captive Portal Profile Authenticated Pass Policy List Name
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.5
Captive Portal Profile associated with AAA profile
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.6
Row Status for initiating a MIB retrieval request.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.7
UNP Profile associated with Captive Portal Profile
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.8
UNP Profile Status associated with Captive Portal Profile
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.3.1.9
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaCPortalProfDomainTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaCPortalProfDomainTable'
Table contain Captive Portal profiles domain specific policy list.
alaDaCPortalProfDomainEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1
Each entry defines Captive portal profiles domain specific policy paramaters.
Column Syntax OID
Captive Portal Profile Authenticated Domain Name
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.1
Captive Portal Profile Authenticated Pass Policy List Name
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.2
Captive Portal Profile Authenticated Pass Realm
Enumerationr/w
Enumerated Values:
1prefix
2suffix
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.3
This object allows entries to be created and deleted in the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.4
Captive Portal Profile Authenticated UNP Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.5
Captive Portal Profile Authenticated UNP Profile Status.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.19.4.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2 · 1 row entry · 9 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaHICSvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaHICSvrTable'
This table shows current configuration for each HIC server.
alaDaHICSvrEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1
A HIC server configuration.
Indexes
Column Syntax OID
Name of the server.
This name is given by the operator to refer the server.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.1
IP address of the server host.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.2
IP address of the server host.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.3
For HIC server only. Port number for HIC request
Integer32r/w
Constraints:
range: 1025-65535
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.4
The shared secret is a string of characters known to the switch
and to the HIC server. It is used to compute the digest to
preserve the integrity between the HIC server and the AoS Switch.
The secret is stored encrypted…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.5
HIC server status.
Enumeration
Enumerated Values:
1down
2up
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.6
Role of the server either primary or backup
Enumeration
Enumerated Values:
1primary
2backup
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.7
The server connection specifies the current mode of the server either active or inactive.
Enumeration
Enumerated Values:
1active
2inactive
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.8
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.2.1.9
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaHICAllowedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaHICAllowedTable'
This table contains the list of allowed/exception IP Addresses the
the HIC hosts allowed to access during HIC. Those are the IP addresses
of the Remediation/Patch servers, and the Web Agent Download server.
alaDaHICAllowedEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1
A Remediation server configuration.
Column Syntax OID
Name of the server.
This name is given by the operator to refer the server.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.1
IP address of the allowed entry.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.2
IP address of the allowed entry.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.3
IP mask type of the allowed entry.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.4
IP Mask of the allowed entry.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.3.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaHICSvrFailPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaHICSvrFailPolicyTable'
This table shows current configuration for HIC server Fail Policy list mapping.
alaDaHICSvrFailPolicyEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1
A HIC server Fail UNP configuration.
Column Syntax OID
The profile name which needs to be modified when the HIC server is down.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.1
The profile name to which the host needs to be moved when the HIC server is down.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.2
Row Status for creating/deleting policy list name .
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.4.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaHICHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaHICHostTable'
This table shows list of HIC Hosts and their active HIC status.
alaDaHICHostEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1
HIC Host status information.
Indexes
Column Syntax OID
Static MAC address index to each override entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1.1
HIC status of each HIC Host.
Enumeration
Enumerated Values:
1inprogress
2success
3fail
4timeout
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.20.5.1.2

alaDaUNPETmplTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21 · 1 row entry · 24 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPETmplTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPETmplTable'
Unp Edge Template Table .
alaDaUNPETmplEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1
EdgeTemplate Entries.
Column Syntax OID
UNP Edge Template name.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.1
Edge Template 802.1X Authenttication Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.2
Edge Template 802.1X Authentication
tx-period configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.3
Edge Template 802.1X Tx period .
secondsInteger32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.4
Edge Template 802.1X Authentication
supp-timeout configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.5
Edge Template 802.1X Authenttication Supp Timeout .
secondsInteger32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.6
Edge Template 802.1X Authentication
supp-timeout configured or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.7
Edge Template 802.1X Authenttication Max Req .
Integer32r/w
Constraints:
range: 0-3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.8
802.1X Auth Pass Alternate Edge Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.9
Edge Template Mac Authenttication Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.10
Mac Auth Pass Alternate Edge Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.11
Edge Template Classification Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.12
Edge Template default Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.13
Associated Group ID .
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.14
Associated Aaa Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.15
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.16
Edge Template Classification Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.17
Failure Policy type.
Enumerationr/w
Enumerated Values:
1default
2macAuth
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.18
Flag to indicate Bypass enable status on port.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.19
Flag to indicate Allow Eap on port.
Enumerationr/w
Enumerated Values:
1pass
2fail
3noauth
4none
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.20
The current value of the administrative controlled
directions parameter for the Port.
Enumerationr/w
Enumerated Values:
1both
2in
3noVal
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.21
The flag to indicate whether the vlan tag in the incoming packet
could be used for classifying the user when MAC authentication fails
and classification rules dont match.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.22
UNP force L3 learning status on the Edge-Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.23
Port-Bounce associated with UNP force L3 learning status on the Edge-Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.21.1.24

alaDaUNPEdgeProfTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22 · 1 row entry · 17 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPEdgeProfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPEdgeProfTable'
Unp Edge Profile Table .
alaDaUNPEdgeProfEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1
Edge Profile Table Entries .
Column Syntax OID
UNP Edge Profile name.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.1
Associated Qos Policy List.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.2
Associated Edge Profile Location Policy Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.3
Associated Edge Profile Period Policy Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.4
Edge Profile HIC Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.5
Edge Profile Captive Portal Authentication Status.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.6
Edge Profile Authentication Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.7
Edge Profile Mobile Tag .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.8
Edge Profile Dhcp Enforcement .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.9
Associated Captive Portal Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.10
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.11
Edge Profile Port bounce Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.12
Edge Profile Kerberos Status .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.13
Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.14
Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.15
Maximum Ingress Depth associated to Bandwidth.
If set to 0, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.16
Maximum Egress Depth associated to Bandwidth.
If set to 0, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.22.1.17
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortRuleTable'
Unp Port Rule Table .
alaDaUNPPortRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1
PortRule Table Entries .
Column Syntax OID
ifIndex .
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.1
Associated Edge Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.3
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.4
Associated Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.5
Associated Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.6
Associated Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.23.1.7

alaDaUNPGroupRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPGroupRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPGroupRuleTable'
Based on Group id , Edge Profile Classification table  .
alaDaUNPGroupRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1
Group Rule Table Entries .
Column Syntax OID
Group Id .
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.1
Associated Edge Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.3
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.24.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacOuiRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacOuiRuleTable'
A list of MAC Oui rules.  This is used to match
the MAC Oui  of a packet to a User Network Profile entry
alaDaUNPMacOuiRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1
A MAC rule entry.
Column Syntax OID
The MAC Oui address used for classification.
MacOui
Type Constraints:
range: 3
Description:
Represents a MAC-OUI.
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.1
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.3
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.4
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.6
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.25.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPEndPoinRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPEndPoinRuleTable'
A list of  End point  rules.  This is used to match
the lldp med-endpoint   of a packet to a User Network Profile entry
alaDaUNPEndPoinRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1
A MAC rule entry.
Column Syntax OID
End Point Identifier .
Enumeration
Enumerated Values:
1ipPhone
2accessPoint
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.1
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.3
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.4
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.6
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of
the Q-in-Q VLAN Tag format, where the value of the outer 802.1Q
VLAN ID is encoded in the le…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.26.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPAuthRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPAuthRuleTable'
A list of  Auth  rules.  This is used to match
authentication type  to a User Network Profile entry
alaDaUNPAuthRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1
Auth based rule entry.
Column Syntax OID
Auth Rule Identifier .
Enumeration
Enumerated Values:
1none
2dot1x
3mac
4dot1xFail
5macFail
6noAuth
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.1
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.3
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.4
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.6
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.27.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28 · 1 row entry · 23 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPClassifRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPClassifRuleTable'
A list of  Calssification rules.  This is used to match
classification rule  to a User Network Profile entry
alaDaUNPClassifRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1
Classification rule entry.
Column Syntax OID
Classification Rule Name .
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.1
Classification Rule Precedence number .
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.2
Classification Rule Edge ProfileName .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.3
Classification Rule port .
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.4
Classification Rule port .
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.5
Classification Rule Group Id. Value of -1
indicates uncofiguring the previously
configured groupId value .
Integer32r/w
Constraints:
range: -1-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.6
Classification Rule mac Address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.7
Classification Rule mac Address Range starting address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.8
Classification Rule mac Address Range ending address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.9
Classification Rule mac oui address.
OctetStringr/w
Constraints:
range: 0-0
range: 3-3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.10
End Point Identifier .
Enumerationr/w
Enumerated Values:
0none
1ipPhone
2accessPoint
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.11
Classification Rule Auth Type .
Enumerationr/w
Enumerated Values:
0none
1noAuth
2dot1x
3mac
4dot1xFail
5macFail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.12
The IP address type .
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.13
Classification Rule Ip address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.14
The IP Mask type .
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.15
Classification Rule Ip Mask.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.16
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.17
The VLAN Tag to be used for classification of tagged pkts.
The VLAN Tag is of the Q-in-Q VLAN Tag format,
where the value of the outer 802.1Q VLAN ID is
encoded in the least significant 16 bits, and the value of the in…
Integer32r/w
Constraints:
range: -1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.18
Classification Rule Customer Domain. Value of -1
indicates uncofiguring the previously
configured customer domain value .
Integer32r/w
Constraints:
range: -1-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.19
Profile with priority 1 associated with the Classification Rule.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.20
Profile with priority 2 associated with the Classification Rule.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.21
Profile with priority 3 associated with the Classification Rule.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.22
Device type associates with the Classification Rule.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.28.1.23
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacPortRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacPortRuleTable'
Mac Address & port classification table .
alaDaUNPMacPortRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1
Mac & port based classification rule .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.1
Classification Rule Port num.
IF-MIBInterfaceIndex
Constraints:
range: 1-2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.2
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.4
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.6
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.7
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.29.1.8
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPIpPortRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPIpPortRuleTable'
Ip Address & port classification table .
alaDaUNPIpPortRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1
Ip & port based classification rule .
Column Syntax OID
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.1
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.2
Classification Rule Port num.
IF-MIBInterfaceIndex
Constraints:
range: 1-2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.3
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.4
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.5
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.6
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.7
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.8
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.9
The IP mask type. This field is mandatory.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.10
The IP network mask applying to the IP network address. This field is mandatory.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.30.1.11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31 · 1 row entry · 12 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacIpPortRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacIpPortRuleTable'
Mac, Ip Address & port classification table .
alaDaUNPMacIpPortRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1
Mac, Ip & port based classification rule .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.1
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.2
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.3
Classification Rule Port num.
IF-MIBInterfaceIndex
Constraints:
range: 1-2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.4
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.6
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.7
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.8
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.9
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.10
The IP mask type. This field is mandatory.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.11
The IP network mask applying to the IP network address. This field is mandatory.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.31.1.12

alaDaUNPMacGroupRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacGroupRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacGroupRuleTable'
Mac Address & Group classification table .
alaDaUNPMacGroupRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1
Mac & group based classification rule .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.1
Classification Rule Group Id.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.2
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.4
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.32.1.5

alaDaUNPIpGroupRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPIpGroupRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPIpGroupRuleTable'
Ip Address & Group classification table .
alaDaUNPIpGroupRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1
Ip & Group based classification rule .
Column Syntax OID
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.1
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.2
Classification Rule Group num.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.3
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.4
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.5
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.33.1.6

alaDaUNPMacIpGroupRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacIpGroupRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacIpGroupRuleTable'
Mac Address,IP  & Group classification table .
alaDaUNPMacIpGroupRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1
Mac Ip & group based classification rule entries .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.1
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.2
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.3
Classification Rule Group Id.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.4
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.6
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.34.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPUserRoleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPUserRoleTable'
User Role Table.
alaDaUNPUserRoleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1
User Role Name based rule entry.
Column Syntax OID
User Role Name .
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.1
User Role Precedence number .
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.2
User Role Policy List Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.3
User Role Edge ProfileName .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.4
User Rule Auth Type .
Enumerationr/w
Enumerated Values:
0noAuth
1none
2dot1x
3mac
4dot1xFail
5macFail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.5
Enable/Disable Captive Portal Post Login Status
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.6
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.7
Enable/Disable Kerberos Post Login Status
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.8
User Role ProfileName .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.9
User Role ProfileName .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.10
User Role ProfileName .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.35.1.11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPRstrctedRoleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPRstrctedRoleTable'
Restricted  Role Table.
alaDaUNPRstrctedRoleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1
Entry identified by Restricted Role .
Column Syntax OID
Unp Restricted Roles .
Enumeration
Enumerated Values:
1unauthorized
2hic
3qmr
4blacklist
5cpPreLogin
6kerberosPreLogin
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.1
Restricted Role Policy List Name .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.36.1.3

alaDaUNPVlanMapTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVlanMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVlanMapTable'
Vlan/Unp Mapping Table .
alaDaUNPVlanMapEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1
Entry identified by Edge Profile Name .
Column Syntax OID
Edge Profile Name .
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.1
Vlan Identifier which is mapped to Edge profile .
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.37.1.3

alaDaUnpGroupIdTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUnpGroupIdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUnpGroupIdTable'
This table creates and deletes the UNP group within a switch.
alaDaUnpGroupIdEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1
UNP GroupId entry
Indexes
Column Syntax OID
alaDaUnpGroupIddeprecated
Unp Group Id.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.1
Unp Group Id.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.38.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPEdgeFlushTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPEdgeFlushTable'
Port, LinkAgg, Mac, Edge User Type Based Flush Table .
alaDaUNPEdgeFlushEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1
One entry to flush edge users on the basis of user criteria.
Column Syntax OID
Interface index .
Integer32
Constraints:
range: 1-1
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.1
Edge Flush Port Criteria .
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.2
Edge Flush Port Criteria .
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.3
Edge Flush Type criteria .
Enumerationr/w
Enumerated Values:
1noAuth
2onex
3mac
4none
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.4
Edge Flush MAC criteria .
SNMPv2-TCMacAddressr/w
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.5
To flush all Edge Users .
Enumerationr/w
Enumerated Values:
1no
2all
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.6
To flush all Edge Users in the given Edge-Profile
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.39.1.7

alaDaUNPMacRulesTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacRulesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacRulesTable'
Mac Address classification table .
alaDaUNPMacRulesEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1
Mac based classification rule .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.1
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.2
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.3
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.40.1.4

alaDaUNPMacRangeTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPMacRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPMacRangeTable'
Mac Address classification table .
alaDaUNPMacRangeEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1
Mac based classification rule .
Column Syntax OID
Classification Rule start mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.1
Classification Rule end mac Address.
SNMPv2-TCMacAddressr/w
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.2
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.4
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.41.1.5

alaDaUNPIpMaskRuleTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPIpMaskRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPIpMaskRuleTable'
Ip Address & port classification table .
alaDaUNPIpMaskRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1
Ip & Mask based classification rule .
Column Syntax OID
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.1
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.2
The IP mask type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.3
The IP network mask.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.4
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.6
The vlan tag to be used for classification of tagged pkts.
Vlan tag of 0 indicates no VLAN is associated.
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.42.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaQMRAllowedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaQMRAllowedTable'
This table shows the list of IP addresses the host can communicate with
when it is in quarantined state.
alaDaQMRAllowedEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1
Entry of the IP address the host can communicate with
when it is in quarantined state..
Column Syntax OID
Allowed name.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.1
IP address type of the IP Adddress that is allowed.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.2
The IP address that is allowed to access.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.3
IP mask type of the allowed entry.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.4
IP Mask of the allowed entry.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.43.2.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44 · 1 row entry · 15 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPValidityPeriodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPValidityPeriodTable'
Table of UNP ValidityPeriod definitions
alaDaUNPValidityPeriodEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1
Definition of UNP ValidityPeriod
Column Syntax OID
Name of validity period
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.1
Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday is most significant.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.2
Status field indicating whether the validity period
has specific active days of the month.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.3
Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.4
Status field indicating whether the validity period
has specific active days of the week.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.5
Time of day this period becomes active.
Format is 'hh:mm'
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.6
Status field indicating whether the validity period
has specific active hours of the day.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.7
Time of day this period becomes inactive.
Format is 'hh:mm'
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.8
Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-19
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.9
Status field indicating whether the validity period
has a specific active date-time interval.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.10
Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-19
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.11
Timezone in which the policy's time has
to be interpreted.
Enumerationr/w
Enumerated Values:
1nzst
2zp11
3aest
4gst
5acst
6kst
7jst
8awst
9zp8
10zp7
11zp6
12ist
13zp5
14zp4
15msk
16eet
17cet
18met
19bst
20wat
21utc
22gmt
23wet
24zm2
25zm3
26nst
27ast
28astcam
29est
30estcam
31cst
32cstcam
33mst
34mstcam
35pst
36pstcam
37akst
38hst
39zm11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.12
Status field indicating whether the validity period
has specific timezone enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.13
Status field indicating whether the validity period
is currently active in the system so that Access Guardian will
utilize it for Time-based Policy checks.
Enumeration
Enumerated Values:
1active
2inactive
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.14
Used to create/delete validity periods according
to the RowStatus convention
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.44.1.15
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPLocationPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPLocationPolicyTable'
Table of UNP Location Policy definitions
alaDaUNPLocationPolicyEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1
Definition of UNP Location Policy
Column Syntax OID
Name of the Location Policy
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.1
Specifies the port criterion
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.2
Specifies the upper bound of the port criterion
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.3
This object has to be set to ENABLE when the ports form one of the criteria for the location policy.
It should be set to DISABLE when the ports are to be removed.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.4
System Name criterion of the Location Policy
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.5
System Location criterion of the Location Policy
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.6
Used to create/delete location policies according
to the RowStatus convention
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.45.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPRedirectAllowedServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPRedirectAllowedServerTable'
Table of UNP Redirect Allowed Server
alaDaUNPRedirectAllowedServerEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1
Definition of UNP Redirect Allowed Server
Column Syntax OID
Name of Redirect Allowed Server
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.1
IP Address Type IPV4/IPV6 of Redirect server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.2
IP Address of Redirect server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.3
IP Mask Type IPV4/IPV6 of Redirect server
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.4
IP Mask Address of Redirect server
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.5
ROwStatus Implies deleting/adding Entry to Table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.46.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaMacVlanUserExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaMacVlanUserExtTable'
Extension to alaDaMacVlanUserTable to support number of applications.
alaDaMacVlanUserExtEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1
Non 802.1x supplicant information.
Column Syntax OID
The ifIndex representing the slot and port where the non 802.1x supplicant is learned.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.1
The MAC address of the non 802.1x supplicant.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.2
The Id of the VLAN on which the non 802.1x supplicant is learned.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.3
to indicate the application number or ID.
Unsigned32
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.4
Applications added to the non 802.1x supplicant
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.47.1.5

alaDaUNPVxlanProfileTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVxlanProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVxlanProfileTable'
This table stores the Service Classification profiles created in the system.
The entries provides information to classify device in the VXLAN Service domain.
alaDaUNPVxlanProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1
VXLAN Service Classification Profile entry
Column Syntax OID
The name of the profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.1
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.2
The object represnet the VNID that is to be used to dynamically
create a VXLAN service.
Unsigned32r/w
Constraints:
range: 1-16777214
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.3
The name of the QoS Policy List name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.4
The name of the Far End IP List that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.5
The IP address type of the multicast group IP address.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.6
The multicast group IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.7
To enable/disable the vlan translation for all the SAPs configured
in this service if the corresponding access ports for the SAPs also
has the vlan translation enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.8
VXLAN Profile Mobile Tag status. When enabled, the packets egressing out on the SAP
will be tagged.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.9
To configure the multicast replication mode for each service:
Head-end(1) where a non-unicast packet entering the SAP port
is replicated once for each receiver in the b-domain using its
unicast BMAC.
Tandem(2) where a n…
Enumerationr/w
Enumerated Values:
1headend
2tandem
3hybrid
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.10
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.48.1.11

alaDaUNPVxlanFlushTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVxlanFlushTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVxlanFlushTable'
Table to flush the VXLAN access users based on some criteria 
such as MAC Address, Authentication Type, SAP, Service and/or Profile.
alaDaUNPVxlanFlushEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1
One entry to flush VXLAN access users on the basis of user criteria.
Column Syntax OID
Flush index.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.1
Flush all users learnt on all VXLAN-access type ports.
Enumerationr/w
Enumerated Values:
1none
2all
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.2
Flush based on the authentication type of the user.
Enumerationr/w
Enumerated Values:
1noAuth
2onex
3mac
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.3
Flush based on a single MAC address.
SNMPv2-TCMacAddressr/w
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.4
Flush the users learnt on the given SAP-ID Interface Index.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.5
Flush the users learnt on the given SAP-ID Encapsulation.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.6
Flush the users learnt of the given VXLAN service.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.7
Flush the users learnt on the given VXLAN Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.49.1.8
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVxlanFarEndIPListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVxlanFarEndIPListTable'
Table shows all the Far-End-IP-Lists configured.
alaDaUNPVxlanFarEndIPListEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1
Far-end IP List entry.
Column Syntax OID
Name of the Far-End-IP list configured.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.1
The count of the IP Addresses configured for the corresponding Far-End-IP-List.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.2
This object is used to remove a Far-End-IP-List.
Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.50.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVxlanFarEndIPAddressListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVxlanFarEndIPAddressListTable'
Table to configure the Far-End-List and the IP Addresses for that list.
alaDaUNPVxlanFarEndIPAddressListEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1
Far-end IP Address List entry.
Column Syntax OID
The IP address type of the IP address.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.1
The Far-End IP address.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.2
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.51.1.3

alaDaUNPSpbFlushTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPSpbFlushTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPSpbFlushTable'
Table to flush the VXLAN access users based on some criteria 
such as MAC Address, Authentication Type, SAP, Service and/or Profile.
alaDaUNPSpbFlushEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1
One entry to flush SPB access users on the basis of user criteria.
Column Syntax OID
Flush index.
Integer32
Constraints:
range: 1-1
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.1
Flush all users learnt on all SPB-access type ports.
Enumerationr/w
Enumerated Values:
1none
2all
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.2
Flush based on the authentication type of the user.
Enumerationr/w
Enumerated Values:
1noAuth
2onex
3mac
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.3
Flush based on a single mac-address.
SNMPv2-TCMacAddressr/w
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.4
Flush the users learnt on the given SAP-ID Interface Index.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.5
Flush the users learnt on the given SAP-ID Encapsulation.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.6
Flush the users learnt of the given VXLAN service.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.7
Flush the users learnt on the given SPB Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.52.1.8
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaKerberosPolicyConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaKerberosPolicyConfigTable'
Provide the list of user policies configured per user domain.
alaDaKerberosPolicyConfigEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1
Policy config table entry.
Column Syntax OID
The name of the kerberos user domain.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.1
The name of the QoS Policy List name that will be used for a kerberos user
in the domain.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-31
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.2
The status of domain level policy list. This can be Active or Inactive.
Enumeration
Enumerated Values:
1active
2inactive
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.3
This object allows entries to be created and deleted in the table
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.2.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaKerberosUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaKerberosUserTable'
Provide the list of Kerberos users.
alaDaKerberosUserEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1
Kerberos user Table entry.
Column Syntax OID
Mac address of the user.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.1
Port number on which user is learned.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.2
Name of the user
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.3
Domain of the user.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.4
Current state of the Kerberos User authentication.
Enumeration
Enumerated Values:
1asAuthenticating
2asAuthenticated
3asFailed
4asTimeout
5tgsAuthenticating
6tgsAuthenticated
7tgsFailed
8tgsTimeout
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.5
Classification Policy applied for the user.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.6
Inactivity Timer left value for the Kerberos users in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.7
Current state of the Kerberos User.
Enumeration
Enumerated Values:
1idle
2active
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.3.1.8

alaDaKerberosPortStatsTable

table deprecated
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaKerberosPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaKerberosPortStatsTable'
This table contains the statistics for kerberos on per port basis.
alaDaKerberosPortStatsEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1
Kerberos statistics table entry.
Column Syntax OID
The ifindex of the port on which Kerberos Snooping is running.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.1
When this object is set to reset(1), all statistics parameters
corresponding to this port gets cleared (reset).
Enumerationr/w
Enumerated Values:
1default
2reset
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.2
Number of packets received by software on a port, destined to the kerberos server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.3
Number of packets from kerberos server received by software on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.4
Number of packets discarded by software on a port, destined to the kerberos server.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.5
Number of packets from kerberos server discarded by software on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.6
Number of AS-REQ packets received on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.7
Number of AS-REP packets received on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.8
Number of TGS-REQ packets received on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.9
Number of TGS-REP packets received on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.10
Number of KRB-ERROR packet received on a port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.4.1.11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaKerberosServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaKerberosServerTable'
This table configures the kerberos server ip address.
alaDaKerberosServerEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1
Kerberos server table entry.
Column Syntax OID
The ip-address type of the Kerberos server.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.1
The ip-address of the Kerberos server.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.2
The UDP port number for Kerberos server host.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.3
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.53.5.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortVlanTable'
This table contains a list of untagged VLANs configured for an UNP Port/Linkagg
alaDaUNPPortVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1
Each of these entries represents an untagged Vlan Port association
Column Syntax OID
Untagged VLAN for an UNP Port/Linkagg.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.1
On create, the specified UNP Port/Linkagg must exist in alaDaUNPPortTable,
otherwise an entry creation in this table would not be allowed. Deletion of an UNP Port/Linkagg entry in
alaDaUNPPortTable would result in dele…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.2
The type of the vpa - unpUntag or unpQtag
Enumerationr/w
Enumerated Values:
1unpQtag
2unpUntag
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.54.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPVlanRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPVlanRuleTable'
Vlan Tag classification table .
alaDaUNPVlanRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1
VlanTag based classification rule .
Column Syntax OID
The vlan tag to be used for classification of tagged pkts. The range states
the valid Vlan range in the system.
Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.1
This object specifies the tag position to which this Vlan Tag rule should be applied in the case of double tagged frames.
Enumerationr/w
Enumerated Values:
1outerTag
2innerTag
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.2
The edge profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.3
The Row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.55.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPETmplVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPETmplVlanTable'
This table contains a list of untagged VLANs configured for an UNP Edge Template.
alaDaUNPETmplVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1
Each of these entries represents an untagged Vlan Edge Template association.
Column Syntax OID
Untagged VLAN for an UNP Edge Template.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1.1
On create, the specified UNP Edge Template must exist in alaDaUNPETmplTable,
otherwise an entry creation in this table would not be allowed. Deletion of an Edge Template entry in
alaDaUNPETmplTable would result in dele…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.56.1.2
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57 · 1 row entry · 10 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPUserFlushTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPUserFlushTable'
Table to flush the UNP users based on some criteria 
such as MAC Address, Authentication Type and Port or SAP/Service.
alaDaUNPUserFlushEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1
One entry to flush users on the basis of user criteria.
Column Syntax OID
Flush index.
Integer32
Constraints:
range: 1-1
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.1
Flush all users learnt on all access type ports.
Enumerationr/w
Enumerated Values:
1none
2all
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.2
Flush based on the authentication type of the user.
Enumerationr/w
Enumerated Values:
1noAuth
2onex
3mac
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.3
Flush based on a single MAC address.
SNMPv2-TCMacAddressr/w
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.4
Flush the users learnt on the given Profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.5
Start of the Port-Range on which the users learnt need to be flushed.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.6
End of the Port-Range on which the users learnt need to be flushed.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.7
Flush the users learnt on the given SAP-ID Interface Index.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.8
Flush the users learnt on the given SAP-ID Encapsulation.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.9
Flush the users learnt of the given service.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.57.1.10
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58 · 1 row entry · 6 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainRuleTable'
Based on customer domain id , Profile Classification table.
alaDaUNPCustDomainRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1
Customer Domain Rule Table Entries .
Column Syntax OID
CustDomain Id .
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.1
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.2
Associated Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.3
Associated Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.4
Associated Profile .
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.5
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.58.1.6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59 · 1 row entry · 25 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortTemplateTable'
Unp Port Template Table.
alaDaUNPPortTemplateEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1
EdgeTemplate Entries.
Column Syntax OID
The name of the Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.1
To enable/disable the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.2
The current value of the administrative controlled
directions parameter for the Port Template.
Enumerationr/w
Enumerated Values:
1both
2in
3noVal
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.3
The Domain that this port belongs to. Default is on domain 0.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.4
To enable/disable Classification on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.5
To enable/disable Truth Tag on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.6
Indicates the type of dynamic service for the port-template.
Dynamic Service type SPB/VXLAN are applicable for Access type UNP port.
Enumerationr/w
Enumerated Values:
1none
2spb
3vxlan
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.7
The default profile for the Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.8
The AAA profile for the Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.9
To enable/disable Redirect Port bounce on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.10
To enable/disable 802.1x authentication on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.11
The Pass-Alternate profile for 802.1X authentication on the Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.12
To enable/disable 802.1x authentication bypass on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.13
802.1x authentication failure policy for the Port Template.
Enumerationr/w
Enumerated Values:
1default
2mac
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.14
802.1x authentication Tx period.
secondsUnsigned32r/w
Constraints:
range: 1-60
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.15
802.1x authentication supplicant Timeout period.
secondsUnsigned32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.16
802.1x authentication Max requests.
Unsigned32r/w
Constraints:
range: 1-3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.17
To enable/disable MAC authentication on the Port Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.18
The Pass-Alternate profile for MAC authentication on the Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.19
To enable/disable MAC authentication on the Port Template.
Enumerationr/w
Enumerated Values:
1pass
2fail
3noAuth
4none
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.20
UNP force L3 learning status on the UNP Port-Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.21
Port-Bounce associated with UNP force L3 learning status on the UNP Port-Template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.22
Row Status for this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.23
Service L2-Profile to be bound to UNP Dynamic Access Ports
for controlling L2-Traffic passing through that port.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.24
To enable/disable AP-mode on the port template.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.59.1.25
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60 · 1 row entry · 19 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileTable'
This table stores the profiles created in the system.
alaDaUNPProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1
Profile entry.
Column Syntax OID
The name of the UNP profile.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.1
UNP profile authentication flag.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.2
UNP profile Mobile Tag flag.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.3
UNP profile Captive Profile Authentication flag.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.4
UNP profile redirect flag.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.5
The name of the QoS Policy List name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.6
The name of the Period Policy List name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.7
The name of the Captive Portal Profile Policy List name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.8
The name of the Location Policy name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.9
The name of the SAA profile name that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.10
Inactivity Timer value for the UNP profile users in minutes.
minutesInteger32r/w
Constraints:
range: 10-600
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.11
UNP profile Kerberos Authentication flag.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.12
Maximum Ingress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Ingress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.13
Maximum Egress Bandwidth (Kbits/sec or Mbits/sec) allowed for traffic associated to this profile.
If value is set to -1, then the Egress Bandwidth specified for the profile is unconfigured.
kilobits per secondInteger32r/w
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.14
Maximum Ingress Depth associated to Bandwidth.
If set to -1, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.15
Maximum Egress Depth associated to Bandwidth.
If set to -1, then the Depth associated with the profile is unconfigured.
Integer32r/w
Constraints:
range: -1-16384
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.16
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.17
Configuration is made by admin or auto-fabric on
this profile
Enumeration
Enumerated Values:
1admin
2autoFabric
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.18
Profile configuration for allowing mac-mobility.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.60.1.19
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileMapVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileMapVlanTable'
This table stores the VLAN profiles created in the system.
The entries would be mapped to vlan ID which would be used
by device authentication for classifying users.
alaDaUNPProfileMapVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1
VLAN Profile entry.
Column Syntax OID
The VLAN ID for this profile.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1.1
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.61.1.2
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62 · 1 row entry · 10 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileMapSpbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileMapSpbTable'
This table stores the Service Classification profiles created in the system.
The entries provides information to classify device in the Service domain.
alaDaUNPProfileMapSpbEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1
Service Classification Profile entry
Column Syntax OID
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.1
The object represent the I-SID that is to be dynamically created when
SPB Service ID does not exist in the system and must be
used along with B-VLAN.
Unsigned32r/w
Constraints:
range: 256-16777214
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.2
The Backbone VLAN ID (BVLAN) used for the I-SID specified in alaUNPProfileMapSpbIsid.
This object must be specified along with alaUNPProfileMapSpbIsid.
Unsigned32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.3
To configure the multicast replication mode for each service:
Head-end(1) where a non-unicast packet entering the SAP port
is replicated once for each receiver in the b-domain using its
unicast BMAC.
Tandem(2) where a n…
Enumerationr/w
Enumerated Values:
1headend
2tandem
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.4
To enable/disable the vlan translation for all the SAPs configured
in this service if the corresponding access ports for the SAPs also
has the VLAN translation enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.5
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.6
To enable/disable the IGMP-snooping.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.7
The name of the IGMP-snooping IPMS profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.8
To enable/disable the MLD-snooping.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.9
The name of the MLD-snooping IPMS profile.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.62.1.10
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63 · 1 row entry · 8 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileMapVxlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileMapVxlanTable'
This table stores the Service Classification profiles created in the system.
The entries provides information to classify device in the VXLAN Service domain.
alaDaUNPProfileMapVxlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1
VXLAN Service Classification Profile entry
Column Syntax OID
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.1
The object represnet the VNID that is to be used to dynamically
create a VXLAN service.
Unsigned32r/w
Constraints:
range: 1-16777215
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.2
The name of the Far End IP List that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.3
The IP address type of the multicast group IP address.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.4
The multicast group IP address.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.5
To enable/disable the vlan translation for all the SAPs configured
in this service if the corresponding access ports for the SAPs also
has the vlan translation enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.6
To configure the multicast replication mode for each service:
Head-end(1) where a non-unicast packet entering the SAP port
is replicated once for each receiver in the b-domain using its
unicast BMAC.
Tandem(2) where a n…
Enumerationr/w
Enumerated Values:
1headend
2tandem
3hybrid
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.7
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.63.1.8
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileMapStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileMapStaticTable'
This table stores the Static profiles created in the system.
alaDaUNPProfileMapStaticEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1
Static Profile entry.
Column Syntax OID
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.1
The Service ID for this profile.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.2
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.64.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65 · 1 row entry · 11 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPCustDomainMacIpRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPCustDomainMacIpRuleTable'
Mac Address,IP  & customer domain classification table .
alaDaUNPCustDomainMacIpRuleEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1
Mac Ip & customer domain based classification rule entries .
Column Syntax OID
Classification Rule mac Address.
SNMPv2-TCMacAddress
Constraints:
range: 6-6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.1
The IP address type .
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.2
The IP network address .
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.3
Classification Rule Group Id.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.4
The VLAN Tag to be used for classification of tagged pkts.
VLAN Tag of 0 indicates no VLAN is associated. The VLAN Tag is of the
Q-in-Q VLAN Tag format, where the value of the outer 802.1Q VLAN ID is
encoded in the leas…
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.5
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.6
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.7
The profile name in the User Network Profile Table to be
applied.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.8
The status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.9
The IP mask type. This object is mandatory.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.10
The IP network mask applying to the IP network address.
This object is mandatory.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.65.1.11
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortTemplateVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortTemplateVlanTable'
This table contains a list of untagged VLANs configured for an UNP Port Template.
alaDaUNPPortTemplateVlanEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1
Each of these entries represents an untagged Vlan Port Template association.
Column Syntax OID
Untagged VLAN for an UNP Port Template.
Unsigned32
Constraints:
range: 1-4094
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.1
On create, the specified UNP Port Template must exist in alaDaUNPPortTemplateTable,
otherwise an entry creation in this table would not be allowed. Deletion of an Port Template entry in
alaDaUNPPortTemplateTable would …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.2
The type of the vpa - unpUntag or unpQtag
Enumerationr/w
Enumerated Values:
1unpQtag
2unpUntag
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.66.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPProfileMapL2GreTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPProfileMapL2GreTable'
This table stores the Service Classification profiles created in the system.
The entries provides information to classify device in the L2Gre Service domain.
alaDaUNPProfileL2GreEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1
L2Gre Service Classification Profile entry.
Column Syntax OID
The encapsulation to be used for the SAP connecting to the service.
ALCATEL-ENT1-TIMETRA-TC-MIBTmnxEncapValr/w
Description:
The value of the label used to identify the entity using the
specified encapsulation value on a specific port.

The format of this object depends on the encapsulation type
defined on this port.

When…
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.1
The object represent the VPNID that is to be used to dynamically
create a L2GRE service.
Unsigned32r/w
Constraints:
range: 1-16777215
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.2
The IP address type. This feature only supports IPv4.
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.3
The IP address. This feature only supports IPv4.
INET-ADDRESS-MIBInetAddressr/w
Constraints:
range: 0-0
range: 4-4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.4
The name of the Far End IP List that will be used if this
User Network Profile is applied for a given device.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.5
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.6
To enable/disable the vlan translation for L2GRE .
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.68.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPL2GreFarEndIPListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPL2GreFarEndIPListTable'
Table shows all the Far-End-IP-Lists configured.
alaDaUNPL2GreFarEndIPListEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1
Far-end IP List entry.
Column Syntax OID
Name of the Far-End-IP list configured.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.1
The count of the IP Addresses configured for the corresponding Far-End-IP-List.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.2
This object is used to remove a Far-End-IP-List.
Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.69.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70 · 1 row entry · 3 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPL2GreFarEndIPAddressListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPL2GreFarEndIPAddressListTable'
Table to configure the Far-End-List and the IP Addresses for that list.
alaDaUNPL2GreFarEndIPAddressListEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1
Far-end IP Address List entry.
Column Syntax OID
The IP address type of the IP address.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.1
The Far-End IP address.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.2
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.70.1.3
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71 · 1 row entry · 5 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPNetworkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPNetworkGroupTable'
Network-group is basic building for defining any number of network groups
alaDaUNPNetworkGroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1
Entry of network groups
Column Syntax OID
The name of the network group entry
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.1
Address type of the network group entry
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.2
IP address of network group
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.3
IP Mask of the network group entry
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.4
Status of the network group entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.71.1.5
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72 · 1 row entry · 4 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPRouterAuthUserGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPRouterAuthUserGroupTable'
Configures a condition for L3-Authentication using a condition as either source- network-group
or destination- network-group or both
alaDaUNPRouterAuthUserGroupEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1
Router Authentication Entry
Column Syntax OID
The name of the condition for router-authentication trigger
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.1
The source-network-group configured group of IPv4 addresse(s)
which needs to be used in defining source and/or dest-network-group condition for
challenging authentication on traffic matching it
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.2
The destination-network-group configuredgroup of IPv4 addresse(s)
which needs to be used in defining source and/or dest-network-group
condition for challenging authentication on traffic matching it
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.3
Router Authentication Row Status
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.72.1.4
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74 · 1 row entry · 7 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPRouterAuthenticationFlushTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPRouterAuthenticationFlushTable'
Table to flush the UNP router authentication.
alaDaUNPRouterAuthenticationFlushEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1
The entry of router authentication flush.
Column Syntax OID
Flush index.
Integer32
Constraints:
range: 1-1
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.1
Flush all users learnt on all access type ports.
Enumerationr/w
Enumerated Values:
1none
2all
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.2
The router authentication flush group name.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.3
The router authentication flush type .
Enumerationr/w
Enumerated Values:
1cp
2ip
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.4
The username of router authentication flush.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.5
The IP address type of router authentication flush
INET-ADDRESS-MIBInetAddressTyper/w
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.6
The IP address of router authentication flush.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.74.1.7
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortProfileTable'
This table contains a list of persistent profile configured for an 
UNP Port/Linkagg. This is applicable only to UNP Port-Type Access.
alaDaUNPPortProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1
Each of these entries represents a persistent UNP-Profile associated
with UNP Access Port/Linkagg.
Column Syntax OID
Persistent UNP-Profile Name assigned on UNP Access Port/Linkagg.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1.1
On create, the specified UNP Port/Linkagg must exist in alaDaUNPPortTable,
otherwise an entry creation in this table would not be allowed. Deletion of an UNP Port/Linkagg entry in
alaDaUNPPortTable would result in dele…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.75.1.2
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76 · 1 row entry · 2 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUNPPortTemplateProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUNPPortTemplateProfileTable'
This table contains a list of persistent profile configured for an 
UNP Port Template.
alaDaUNPPortTemplateProfileEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1
Each of these entries represents a persistent UNP-Profile associated
with an UNP Port Template.
Column Syntax OID
Persistent UNP-Profile Name assigned on UNP Port Template.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 1-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1.1
On create, the specified UNP Port Template must exist in alaDaUNPPortTemplateTable,
otherwise an entry creation in this table would not be allowed. Deletion of an UNP PortTemplate entry in
alaDaUNPPortTemplateTable wou…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.76.1.2
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77 · 1 row entry · 10 columns
Uses the alcatel-ent1 variant from /opt/observium/mibs/alcatel-ent1.
Command help
Walk alaDaUnpRouterAuthenticationUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ALCATEL-ENT1-DA-MIB' -M '/opt/observium/mibs/alcatel-ent1:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ALCATEL-ENT1-DA-MIB::alaDaUnpRouterAuthenticationUserTable'
A table of router authentication users.
alaDaUnpRouterAuthenticationUserEntry row .1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1
The entry of router authentication user.
Column Syntax OID
The address type of the router authentication user.
INET-ADDRESS-MIBInetAddressType
Enumerated Values:
1ipv4
2ipv6
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.1
The IP address of the router authentication user.
INET-ADDRESS-MIBInetAddress
Constraints:
range: 4-4
range: 16-16
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.2
The name of the condition for router authentication user.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.3
The destination group configured group of IPv4 address(s).
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.4
The name of the router authentication user interface.
SNMP-FRAMEWORK-MIBSnmpAdminString
Constraints:
range: 0-32
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.5
The Vlan of the router authentication user.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.6
The type of the router authentication user.
Enumeration
Enumerated Values:
1ip
2cp
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.7
The status of the router authentication user.
Enumeration
Enumerated Values:
1pass
2fail
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.8
The login time stamp of the router authentication user.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.9
The number of seconds after which the session is disabled.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6486.801.1.2.1.63.1.1.77.1.10