ADTRAN-TAOCTADSL2-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

adTAOctAdslConfProfileExtTable

table

.1.3.6.1.4.1.664.2.432.2.1 · 1 row entry · 8 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslConfProfileExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslConfProfileExtTable'

This table contains ADSL line profile configuration
information not defined in the adslLineConfProfileTable
from the ADSL-LINE-MIB.  This includes the line type.

adTAOctAdslConfProfileExtEntry row .1.3.6.1.4.1.664.2.432.2.1.1

An entry extends the adslLineConfProfileEntry
defined in ADSL-LINE-MIB. Each entry corresponds
to an ADSL line profile.

Indexes

ADSL-LINE-MIBadslLineConfProfileName

Column Syntax OID

adTAOctAdslConfProfileLineType

This object is used to configure the ADSL physical
line type. The object, including enumerations, was
taken from the ADSL Extension MIB as this was the only
variable in the Extension MIB to be supported. Only
enumerati…

Enumerationr/w

Enumerated Values:

1	noChannel
2	fastOnly
3	interleavedOnly
4	fastOrInterleaved
5	fastAndInterleaved

.1.3.6.1.4.1.664.2.432.2.1.1.1

adTAOctAdslConfProfileServiceMode

This object is used to provision the ADSL physical
line service mode. If the line card is a legacy adsl
line card, the multiMode option will allow the
ATUC to adapt to the ATUR's mode, assuming it is T1.413,
G.dmt, or G…

Enumerationr/w

Enumerated Values:

1	multiMode
2	t1413
3	gDMT
4	gLite
5	g9923
6	g9924
7	g9925
8	readsl
9	adsl1MultiMode
10	g9925AnxM

.1.3.6.1.4.1.664.2.432.2.1.1.2

adTAOctAdslConfProfileIndexApplied

This object is used to contain the index of the ADSL
template or profile applied to the line. This index
is used internally to look up a name or description
of the profile. It is NOT equivalent to:
INDEX {IMPLIED adslLi…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.664.2.432.2.1.1.3

adTAOctAdslConfProfileName

This object is used to identify the ADSL template or
profile applied to the line by name.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.664.2.432.2.1.1.4

adTAOctAdslAtucConfProfileInterleaveMinINPobsolete

The minimum amount of impulse noise protection,
measured in steps of 0.5 DMT symbols (250
microseconds per DMT symbol). This is for the
downstream direction.
NOTE: A set here applies for both upstream AND downstream.

Enumerationr/w

Enumerated Values:

1	zeroDMTSymbols
2	halfDMTSymbols
3	oneDMTSymbols
4	twoDMTSymbols

.1.3.6.1.4.1.664.2.432.2.1.1.5

adTAOctAdslAturConfProfileInterleaveMinINPobsolete

The minimum amount of impulse noise protection,
measured in steps of 0.5 DMT symbols (250
microseconds per DMT symbol). This is for the
upstream direction.

0.5 DMT symbolsEnumeration

Enumerated Values:

1	zeroDMTSymbols
2	halfDMTSymbols
3	oneDMTSymbols
4	twoDMTSymbols

.1.3.6.1.4.1.664.2.432.2.1.1.6

adTAOctAdslAtucConfProfileInterleaveMinInpRev2

The minimum amount of impulse noise protection,
measured as 0 DMT symbols, 0.5 DMT symbols (250
microseconds per DMT symbol), or 1-16 DMT symbols.
This is for the downstream direction.

Enumerationr/w

Enumerated Values:

1	zeroDMTSymbols
2	halfDMTSymbols
3	oneDMTSymbols
4	twoDMTSymbols
5	threeDMTSymbols
6	fourDMTSymbols
7	fiveDMTSymbols
8	sixDMTSymbols
9	sevenDMTSymbols
10	eightDMTSymbols
11	nineDMTSymbols
12	tenDMTSymbols
13	elevenDMTSymbols
14	twelveDMTSymbols
15	thirteenDMTSymbols
16	fourteenDMTSymbols
17	fifteenDMTSymbols
18	sixteenDMTSymbols

.1.3.6.1.4.1.664.2.432.2.1.1.7

adTAOctAdslAturConfProfileInterleaveMinInpRev2

The minimum amount of impulse noise protection,
measured as 0 DMT symbols, 0.5 DMT symbols (250
microseconds per DMT symbol), or 1-16 DMT symbols.
This is for the upstream direction.

Enumerationr/w

Enumerated Values:

1	zeroDMTSymbols
2	halfDMTSymbols
3	oneDMTSymbols
4	twoDMTSymbols
5	threeDMTSymbols
6	fourDMTSymbols
7	fiveDMTSymbols
8	sixDMTSymbols
9	sevenDMTSymbols
10	eightDMTSymbols
11	nineDMTSymbols
12	tenDMTSymbols
13	elevenDMTSymbols
14	twelveDMTSymbols
15	thirteenDMTSymbols
16	fourteenDMTSymbols
17	fifteenDMTSymbols
18	sixteenDMTSymbols

.1.3.6.1.4.1.664.2.432.2.1.1.8

adTAOctAdslConfLineTable

table

.1.3.6.1.4.1.664.2.432.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslConfLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslConfLineTable'

This table is patterned after the adslLineTable and
includes common attributes describing
both ends of the line.  It applies to all ADSL
physical interfaces.  ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adTAOctAdslConfLineEntry row .1.3.6.1.4.1.664.2.432.2.2.1

An entry in adTAOctAdslConfLineTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adTAOctAdslHamBandMask

Used to enable/disable the hamband mask
for the indexed ADSL port. This object is
only valid for lines trained using ADSL2+
service mode

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.664.2.432.2.2.1.1

adTAOctAdslCabinetMode

Used to enable/disable cabinet mode
for the indexed ADSL port. The different
enable options determine which starting
tone to use. This object is only valid
for lines trained using ADSL2+ service
mode.

Enumerationr/w

Enumerated Values:

1	disable
2	enableTone110
3	enableTone130
4	enableTone250

.1.3.6.1.4.1.664.2.432.2.2.1.2

adTAOctAdslPowerThreshold

Used to set the max ADSL tx power.
Disabled = no restriction,
dBm14 = max tx power 14 dBm,
dBm12 = max tx power 12 dBm,
dBm10 = max tx power 10 dBm

Enumerationr/w

Enumerated Values:

1	disable
2	dBm10
3	dBm12
4	dBm14

.1.3.6.1.4.1.664.2.432.2.2.1.3

adTAOctAdslAtucCarrierMask

Per port Subcarrier Masking. In big endian order, each bit
represents a tone from 0 to 63 in the upstream direction. Writing a 1 to a given bit
location enables a tone. Writing a 0 disables a tone.
Ex. Writing 0xff50 al…

OctetStringr/w

.1.3.6.1.4.1.664.2.432.2.2.1.4

adTAOctAdslAturCarrierMask

Per port Subcarrier Masking. In big endian order, each bit
represents a tone from 0 to 511 in the downstream direction. Writing a 1 to a given bit
location enables a tone. Writing a 0 disables a tone.
Ex. Writing 0xff50…

OctetStringr/w

.1.3.6.1.4.1.664.2.432.2.2.1.5

adTAOctAdslLineTable

table

.1.3.6.1.4.1.664.2.432.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslLineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslLineTable'

This table is patterned after the adslLineTable and
includes common attributes describing
both ends of the line.  It applies to all ADSL
physical interfaces.  ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adTAOctAdslLineEntry row .1.3.6.1.4.1.664.2.432.4.1.1

An entry in adTAOctAdslLineTable.

Indexes

IF-MIBifIndex

Column Syntax OID

adTAOctAdslCurrLinkStatus

The current status of the line (i.e., the link
between the ATUC and ATUR).

Enumeration

Enumerated Values:

1	up
2	down
3	testing
4	training

.1.3.6.1.4.1.664.2.432.4.1.1.1

adTAOctAdslCurrStandard

The standard governing the link
between the ATUC and ATUR.

Enumeration

Enumerated Values:

1	reserved
2	t1413
3	gDMT
4	gLite
5	g9923
6	g9924
7	g9925
8	readsl
9	adsl1MultiMode
10	g9925AnxM

.1.3.6.1.4.1.664.2.432.4.1.1.2

adTAOctAdslBitAllocationMap

Per port Bit Allocation Table. 256 nibbles are represented.
For each byte bits 4-7 map to the first sub-carrier, bits 0-3 map
to the second sub-carrier.

OctetString

Constraints:
range: 128-128

.1.3.6.1.4.1.664.2.432.4.1.1.3

adTAOctAdslBitAllocationMapGroup2

Per port Bit Allocation Table tones 256-511. 256 nibbles are represented.
For each byte bits 4-7 map to the first sub-carrier, bits 0-3 map
to the second sub-carrier.

OctetString

Constraints:
range: 128-128

.1.3.6.1.4.1.664.2.432.4.1.1.4

adTAOctAdslUsSnrMarginMap

Per port Signal-to-Noise Ratio table. Each two bytes represents the
upstream margin in tenth dB per tone.

0.1 dBOctetString

Constraints:
range: 128-128

.1.3.6.1.4.1.664.2.432.4.1.1.5

adTAOctAdslAtucPhysTable

table

.1.3.6.1.4.1.664.2.432.4.2 · 1 row entry · 3 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAtucPhysTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAtucPhysTable'

This table provides one row for each ATUC.
Each row contains the Physical Layer Parameters
table for that ATUC. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adTAOctAdslAtucPhysEntry row .1.3.6.1.4.1.664.2.432.4.2.1

An entry in the adTAOctAdslAtucPhysTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAtucNumParityBytes Number of Reed-Solomon parity bytes per frame. The value corresponds to the parameter R. This value is only valid when the link is up.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.2.1.2`
adTAOctAdslAtucFramesPerCodeword Hundredth downstream frames per codeword. For G.dmt Mode and G.lite Mode this value corresponds to the data-frames per DMT-symbol. For ADSL2, ADSL2lite, and ADSL2+ modes the value corresponds to the mux data frames per …	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.2.1.3`
adTAOctAdslAtucInterleavingDepth Interleaving depth. The value corresponds to the parameter D. This value is only valid when the link is up.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.2.1.4`

adTAOctAdslAturPhysTable

table

.1.3.6.1.4.1.664.2.432.4.3 · 1 row entry · 5 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAturPhysTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAturPhysTable'

This table provides one row for each ATUR.
Each row contains the Physical Layer Parameters
table for that ATUR. ADSL physical interfaces are
those ifEntries where ifType is equal to adsl(94).

adTAOctAdslAturPhysEntry row .1.3.6.1.4.1.664.2.432.4.3.1

An entry in the adTAOctAdslAturPhysTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAturNumParityBytes Number of Reed-Solomon parity bytes per frame. The value corresponds to the parameter R. This value is only valid when the link is up.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.3.1.2`
adTAOctAdslAturFramesPerCodeword Hundredth upstream frames per codeword. For G.dmt Mode and G.lite Mode this value corresponds to the data-frames per DMT-symbol. For ADSL2, ADSL2lite, and ADSL2+ modes the value corresponds to the mux data frames per co…	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.3.1.3`
adTAOctAdslAturInterleavingDepth Interleaving depth. The value corresponds to the parameter D. This value is only valid when the link is up.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.664.2.432.4.3.1.4`
adTAOctAdslAturCapabilities The ATUR capabilities is a listing of ADSL properties on a port. It is bit-masked (0 for disabled, 1 for enabled) in the following way: Bit Capability --- ---------- 0 Full Rate ADSL over ISDN 1 Full …	Integer32 Constraints: `range: 1-1048575`	`.1.3.6.1.4.1.664.2.432.4.3.1.5`
adTAOctAdslAturInvProviderCode The provider code is a copy of the binary provider code field defined by the PHY[10] and expressed as readable characters.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.664.2.432.4.3.1.6`

adTAOctAdslAtucChanTable

table

.1.3.6.1.4.1.664.2.432.4.4 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAtucChanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAtucChanTable'

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adTAOctAdslAtucChanEntry row .1.3.6.1.4.1.664.2.432.4.4.1

An entry in the adTAOctAdslAAtucChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAtucChanINP Current impulse noise protection on this channel, measured in increments of 0.01 DMT symbols.	0.01 dmt symbolsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.4.1.1`
adTAOctAdslAtucRelativeCap Relative capacity of the ADSL line being used measured by percentage.	0.1 percentSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.4.1.2`

adTAOctAdslAturChanTable

table

.1.3.6.1.4.1.664.2.432.4.5 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAturChanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAturChanTable'

This table provides one row for each ATUR channel.
ADSL channel interfaces are those ifEntries
where ifType is equal to adslInterleave(124)
or adslFast(125).

adTAOctAdslAturChanEntry row .1.3.6.1.4.1.664.2.432.4.5.1

An entry in the adTAOctAdslAAturChanTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAturChanINP Current impulse noise protection on this channel, measured in increments of 0.01 DMT symbols.	0.01 dmt symbolsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.5.1.1`
adTAOctAdslAturRelativeCap Relative capacity of the ADSL line being used measured by percentage.	0.1 percentSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.5.1.2`

adTAOctAdslAtmAtucCellCountTable

table

.1.3.6.1.4.1.664.2.432.4.6 · 1 row entry · 3 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAtmAtucCellCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAtmAtucCellCountTable'

This table provides one row for each ATM ATUC 
cell count.

adTAOctAdslAtmAtucCellCountEntry row .1.3.6.1.4.1.664.2.432.4.6.1

An entry in the AdTAOctAdslAtmAtucCellCountEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAtmAtucCellCount The ATUC cell count is the sum of all ATM cells from all VCIs on a given port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.6.1.1`
adTAOctAdslAtmAtucIdleCellCount The ATUC idle cell count is the sum of all idle ATM cells from all VCIs on a given port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.6.1.2`
adTAOctAdslAtmAtucHecErrorCount The ATUC HEC Error count is the sum of all HEC errors from all VCIs on a given port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.6.1.3`

adTAOctAdslAtmAturCellCountTable

table

.1.3.6.1.4.1.664.2.432.4.7 · 1 row entry · 2 columns

Open in standard view

Uses the adtran variant from /opt/observium/mibs/adtran.

Command help

Walk adTAOctAdslAtmAturCellCountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADTRAN-TAOCTADSL2-MIB' -M '/opt/observium/mibs/adtran:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADTRAN-TAOCTADSL2-MIB::adTAOctAdslAtmAturCellCountTable'

This table provides one row for each ATM ATUR 
cell count.

adTAOctAdslAtmAturCellCountEntry row .1.3.6.1.4.1.664.2.432.4.7.1

An entry in the AdTAOctAdslAtmAturCellCountEntry.

Indexes

IF-MIBifIndex

Column	Syntax	OID
adTAOctAdslAtmAturCellCount The ATUR cell count is the sum of all ATM cells from all VCIs on a given port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.7.1.1`
adTAOctAdslAtmAturIdleCellCount The ATUR idle cell count is the sum of all idle ATM cells from all VCIs on a given port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.664.2.432.4.7.1.2`