ACD-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
154

acdL2FilterTable

table deprecated
.1.3.6.1.4.1.22420.2.2.1 · 1 row entry · 23 columns
Open in standard view
Uses the accedian variant from /opt/observium/mibs/accedian.
Command help
Walk acdL2FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACD-FILTER-MIB' -M '/opt/observium/mibs/accedian:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACD-FILTER-MIB::acdL2FilterTable' 
Table of all Layer 2 filters
acdL2FilterEntry row .1.3.6.1.4.1.22420.2.2.1.1
A Filter is a pattern matching a definition against packets.
Indexes
Column Syntax OID
acdL2FilterID
Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.1.1.1
acdL2FilterName
This is a string to identify the filter.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.22420.2.2.1.1.2
acdL2FilterMacDstEn
Enable or disable the destination MAC address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.3
acdL2FilterMacDst
The destination MAC address used to compare the incoming traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.22420.2.2.1.1.4
acdL2FilterMacDstMask
Number of destination MAC address bits to compare. Its value ranges
from 0 to 48. Only specific mask are valid per platform.
Unsigned32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.22420.2.2.1.1.5
acdL2FilterMacSrcEn
Enable or disable the source MAC address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.6
acdL2FilterMacSrc
The source MAC address used to compare the incoming traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.22420.2.2.1.1.7
acdL2FilterMacSrcMask
Number of source MAC address bits to compare. Its value ranges
from 0 to 48. Only specific mask are valid per platform.
Unsigned32r/w
Constraints:
range: 0-48
 .1.3.6.1.4.1.22420.2.2.1.1.8
acdL2FilterEtypeEn
Enable or disable the Ethernet type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.9
acdL2FilterEtype
The Ethernet type used to compare the incoming traffic.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.1.1.10
acdL2FilterVlan1PriorEn
Enable or disable the first VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.11
acdL2FilterVlan1Prior
The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.1.1.12
acdL2FilterVlan1CfiEn
Enable or disable the first VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.13
acdL2FilterVlan1Cfi
The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.22420.2.2.1.1.14
acdL2FilterVlan1IdEn
Enable or disable the first VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.15
acdL2FilterVlan1Id
The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.1.1.16
acdL2FilterVlan2PriorEn
Enable or disable the second VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.17
acdL2FilterVlan2Prior
The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.1.1.18
acdL2FilterVlan2CfiEn
Enable or disable the second VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.19
acdL2FilterVlan2Cfi
The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.22420.2.2.1.1.20
acdL2FilterVlan2IdEn
Enable or disable the second VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.1.1.21
acdL2FilterVlan2Id
The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4065
 .1.3.6.1.4.1.22420.2.2.1.1.22
acdL2FilterRowStatus
All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.22420.2.2.1.1.23

acdIPv4FilterTable

table deprecated
.1.3.6.1.4.1.22420.2.2.2 · 1 row entry · 27 columns
Open in standard view
Uses the accedian variant from /opt/observium/mibs/accedian.
Command help
Walk acdIPv4FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACD-FILTER-MIB' -M '/opt/observium/mibs/accedian:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACD-FILTER-MIB::acdIPv4FilterTable' 
Table of all IPv4 filters
acdIPv4FilterEntry row .1.3.6.1.4.1.22420.2.2.2.1
A Filter is a pattern matching a definition against packets.
Indexes
Column Syntax OID
acdIPv4FilterID
Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.2.1.1
acdIPv4FilterName
This is a string to identify the filter.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.22420.2.2.2.1.2
acdIPv4FilterSrcEn
Enable or disable the Source IP address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.3
acdIPv4FilterSrc
The source IP address used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.2.1.4
acdIPv4FilterSrcMask
The source IP address mask used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.2.1.5
acdIPv4FilterDstEn
Enable or disable the Destination IP address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.6
acdIPv4FilterDst
The destination IP address used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.2.1.7
acdIPv4FilterDstMask
The destination IP address mask used to compare the incoming
traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.2.1.8
acdIPv4FilterProtoEn
Enable or disable the IP protocol check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.9
acdIPv4FilterProto
The IP protocol used to compare the incoming traffic. Its value
ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.2.1.10
acdIPv4FilterTTLEn
Enable or disable the TTL check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.11
acdIPv4FilterTTL
The TTL used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.2.1.12
acdIPv4FilterIHLEn
Enable or disable the IP Header Length check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.13
acdIPv4FilterIHL
The IP Header Length used to compare the incoming traffic.
Its value ranges from 5 to 15.
Unsigned32r/w
Constraints:
range: 5-15
 .1.3.6.1.4.1.22420.2.2.2.1.14
acdIPv4FilterDscpEn
Enable or disable the DSCP (Diff-Serv Code Point) check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.15
acdIPv4FilterDscp
The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.22420.2.2.2.1.16
acdIPv4FilterECNEn
Enable or disable the ECN (Explicite Cogestion Notification) check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.17
acdIPv4FilterECN
The ECN value used to compare the incoming traffic.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.22420.2.2.2.1.18
acdIPv4FilterSrcPortEn
Enable or disable the UDP/TCP Source port check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.19
acdIPv4FilterSrcPort
The UDP/TCP Source Port used to compare the incoming traffic.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.2.1.20
acdIPv4FilterDstPortEn
Enable or disable the UDP/TCP Destination port check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.21
acdIPv4FilterDstPort
The UDP/TCP Destination Port used to compare the incoming traffic.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.2.1.22
acdIPv4FilterIcmpTypeEn
Enable or disable the ICMP type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.23
acdIPv4FilterIcmpType
The ICMP type used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.2.1.24
acdIPv4FilterIcmpCodeEn
Enable or disable the ICMP code check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.2.1.25
acdIPv4FilterIcmpCode
The ICMP code used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.2.1.26
acdIPv4FilterRowStatus
All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.22420.2.2.2.1.27

acdSmapL2FilterTable

table
.1.3.6.1.4.1.22420.2.2.3 · 1 row entry · 43 columns
Open in standard view
Uses the accedian variant from /opt/observium/mibs/accedian.
Command help
Walk acdSmapL2FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACD-FILTER-MIB' -M '/opt/observium/mibs/accedian:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACD-FILTER-MIB::acdSmapL2FilterTable' 
Table of all service mapping (SMAP) Layer 2 filters
acdSmapL2FilterEntry row .1.3.6.1.4.1.22420.2.2.3.1
A Filter is a pattern matching a definition against packets.
Indexes
Column Syntax OID
acdSmapL2FilterID
Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.3.1.1
acdSmapL2FilterName
This is a string to identify the filter.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.22420.2.2.3.1.2
acdSmapL2FilterRowStatus
All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.22420.2.2.3.1.3
acdSmapL2FilterVlan1PriorEn
Enable or disable the first VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.4
acdSmapL2FilterVlan1Prior
The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.5
acdSmapL2FilterVlan1PriorLast
First VLAN priority last value, used in range operation.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.6
acdSmapL2FilterVlan1PriorOper
First VLAN Priority operator. Valid operator types are:
Greater than, Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.7
acdSmapL2FilterVlan1IdEn
Enable or disable the first VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.8
acdSmapL2FilterVlan1Id
The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.3.1.9
acdSmapL2FilterVlan1IdLast
First VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.3.1.10
acdSmapL2FilterVlan1IdOper
First VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.11
acdSmapL2FilterVlan1CfiEn
Enable or disable the first VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.12
acdSmapL2FilterVlan1Cfi
The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.22420.2.2.3.1.13
acdSmapL2FilterVlan1TypeEn
Enable or disable the first VLAN Ethertype check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.14
acdSmapL2FilterVlan1Type
VLAN Ethernet type.
AcdFilterVlanTyper/w
Type Values:
1cvlan
2svlan
3both
4tvlan
5any
 .1.3.6.1.4.1.22420.2.2.3.1.15
acdSmapL2FilterVlan2PriorEn
Enable or disable the second VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.16
acdSmapL2FilterVlan2Prior
The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.17
acdSmapL2FilterVlan2PriorLast
Second VLAN priority last value, used in range operation.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.18
acdSmapL2FilterVlan2PriorOper
VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.19
acdSmapL2FilterVlan2IdEn
Enable or disable the second VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.20
acdSmapL2FilterVlan2Id
The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.3.1.21
acdSmapL2FilterVlan2IdLast
Second VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.3.1.22
acdSmapL2FilterVlan2IdOper
Second VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.23
acdSmapL2FilterVlan2CfiEn
Enable or disable the second VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.24
acdSmapL2FilterVlan2Cfi
The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.22420.2.2.3.1.25
acdSmapL2FilterVlan2TypeEn
Enable or disable the second VLAN Ethertype check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.26
acdSmapL2FilterVlan2Type
VLAN Ethernet type.
AcdFilterVlanTyper/w
Type Values:
1cvlan
2svlan
3both
4tvlan
5any
 .1.3.6.1.4.1.22420.2.2.3.1.27
acdSmapL2FilterMacDstEn
Enable or disable the destination MAC address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.28
acdSmapL2FilterMacDst
The destination MAC address used to compare the incoming traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.22420.2.2.3.1.29
acdSmapL2FilterMacDstMask
Number of destination MAC address bits to compare. Its value ranges
from 0 to 48.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.3.1.30
acdSmapL2FilterMacSrcEn
Enable or disable the source MAC address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.31
acdSmapL2FilterMacSrc
The source MAC address used to compare the incoming traffic.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.22420.2.2.3.1.32
acdSmapL2FilterMacSrcMask
Number of source MAC address bits to compare. Its value ranges
from 0 to 48.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.3.1.33
acdSmapL2FilterEtypeEn
Enable or disable the Ethernet type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.34
acdSmapL2FilterEtype
The Ethernet type used to compare the incoming traffic.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.3.1.35
acdSmapL2FilterIpCosEn
Enable or disable the Ethernet type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.3.1.36
acdSmapL2FilterIpCosMode
VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range).
Enumerationr/w
Enumerated Values:
1dscp
2pre
 .1.3.6.1.4.1.22420.2.2.3.1.37
acdSmapL2FilterDscp
The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.22420.2.2.3.1.38
acdSmapL2FilterDscpLast
The last DSCP value, used in range operation.
Its value ranges from 0 to 63.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.22420.2.2.3.1.39
acdSmapL2FilterDscpOper
DSCP operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.40
acdSmapL2FilterPre
The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.41
acdSmapL2FilterPreLast
The last Precedence value, used in range operation.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.3.1.42
acdSmapL2FilterPreOper
Precedence operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.3.1.43

acdSmapIPv4FilterTable

table
.1.3.6.1.4.1.22420.2.2.4 · 1 row entry · 61 columns
Open in standard view
Uses the accedian variant from /opt/observium/mibs/accedian.
Command help
Walk acdSmapIPv4FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ACD-FILTER-MIB' -M '/opt/observium/mibs/accedian:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ACD-FILTER-MIB::acdSmapIPv4FilterTable' 
Table of all Extended IPv4 filters
acdSmapIPv4FilterEntry row .1.3.6.1.4.1.22420.2.2.4.1
A Filter is a pattern matching a definition against packets.
Indexes
Column Syntax OID
acdSmapIPv4FilterID
Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.4.1.1
acdSmapIPv4FilterName
This is a string to identify the filter.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.22420.2.2.4.1.2
acdSmapIPv4FilterRowStatus
All columns must have a valid value before a row can be activated. To
create a new filter you shall provide the a unique filter name for
an empty row with the RowStatus set to Create and Go. To delete the
row you need t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.22420.2.2.4.1.3
acdSmapIPv4FilterVlan1PriorEn
Enable or disable the first VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.4
acdSmapIPv4FilterVlan1Prior
The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.5
acdSmapIPv4FilterVlan1PriorLast
First VLAN priority last value, used in range operation.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.6
acdSmapIPv4FilterVlan1PriorOper
VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.7
acdSmapIPv4FilterVlan1IdEn
Enable or disable the first VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.8
acdSmapIPv4FilterVlan1Id
The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.4.1.9
acdSmapIPv4FilterVlan1IdLast
First VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.4.1.10
acdSmapIPv4FilterVlan1IdOper
First VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.11
acdSmapIPv4FilterVlan1CfiEn
Enable or disable the first VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.12
acdSmapIPv4FilterVlan1Cfi
The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.22420.2.2.4.1.13
acdSmapIPv4FilterVlan1TypeEn
Enable or disable the first VLAN Ethertype check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.14
acdSmapIPv4FilterVlan1Type
VLAN Ethernet type.
AcdFilterVlanTyper/w
Type Values:
1cvlan
2svlan
3both
4tvlan
5any
 .1.3.6.1.4.1.22420.2.2.4.1.15
acdSmapIPv4FilterVlan2PriorEn
Enable or disable the second VLAN priority check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.16
acdSmapIPv4FilterVlan2Prior
The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.17
acdSmapIPv4FilterVlan2PriorLast
Second VLAN priority last value, used in range operation.
Its value ranges from 0 to 7.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.18
acdSmapIPv4FilterVlan2PriorOper
VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.19
acdSmapIPv4FilterVlan2IdEn
Enable or disable the second VLAN ID check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.20
acdSmapIPv4FilterVlan2Id
The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.4.1.21
acdSmapIPv4FilterVlan2IdLast
The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095.
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.22420.2.2.4.1.22
acdSmapIPv4FilterVlan2IdOper
VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.23
acdSmapIPv4FilterVlan2CfiEn
Enable or disable the second VLAN CFI check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.24
acdSmapIPv4FilterVlan2Cfi
The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.22420.2.2.4.1.25
acdSmapIPv4FilterVlan2TypeEn
Enable or disable the second VLAN Ethertype check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.26
acdSmapIPv4FilterVlan2Type
VLAN Ethernet type.
AcdFilterVlanTyper/w
Type Values:
1cvlan
2svlan
3both
4tvlan
5any
 .1.3.6.1.4.1.22420.2.2.4.1.27
acdSmapIPv4FilterSrcEn
Enable or disable the Source IP address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.28
acdSmapIPv4FilterSrc
The source IP address used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.4.1.29
acdSmapIPv4FilterSrcMask
The source IP address mask used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.4.1.30
acdSmapIPv4FilterDstEn
Enable or disable the Destination IP address check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.31
acdSmapIPv4FilterDst
The destination IP address used to compare the incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.4.1.32
acdSmapIPv4FilterDstMask
The destination IP address mask used to compare the
incoming traffic.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.22420.2.2.4.1.33
acdSmapIPv4FilterProtoEn
Enable or disable the IP protocol check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.34
acdSmapIPv4FilterProto
The IP protocol used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.4.1.35
acdSmapIPv4FilterTTLEn
Enable or disable the TTL check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.36
acdSmapIPv4FilterTTL
The TTL used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.4.1.37
acdSmapIPv4FilterIHLEn
Enable or disable the IP Header Length check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.38
acdSmapIPv4FilterIHL
The IP Header Length used to compare the incoming traffic.
Its value ranges from 5 to 15.
Unsigned32r/w
Constraints:
range: 5-15
 .1.3.6.1.4.1.22420.2.2.4.1.39
acdSmapIPv4FilterIpCosEn
Enable or disable the Ethernet type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.40
acdSmapIPv4FilterIpCosMode
VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range).
Enumerationr/w
Enumerated Values:
1dscp
2pre
 .1.3.6.1.4.1.22420.2.2.4.1.41
acdSmapIPv4FilterDscp
The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.22420.2.2.4.1.42
acdSmapIPv4FilterDscpLast
The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.22420.2.2.4.1.43
acdSmapIPv4FilterDscpOper
DSCP operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.44
acdSmapIPv4FilterPre
The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.45
acdSmapIPv4FilterPreLast
The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.22420.2.2.4.1.46
acdSmapIPv4FilterPreOper
Precedence operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range).
AcdFilterOperatorr/w
Type Values:
1lessThan
2greaterThan
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.47
acdSmapIPv4FilterECNEn
Enable or disable the ECN (Explicite Cogestion Notification) check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.48
acdSmapIPv4FilterECN
The ECN value used to compare the incoming traffic.
Its value ranges from 0 to 3.
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.22420.2.2.4.1.49
acdSmapIPv4FilterSrcPortEn
Enable or disable the UDP/TCP Source port check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.50
acdSmapIPv4FilterSrcPort
The UDP/TCP Source Port used to compare the incoming traffic.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.4.1.51
acdSmapIPv4FilterDstPortEn
Enable or disable the UDP/TCP Destination port check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.52
acdSmapIPv4FilterDstPort
The UDP/TCP Destination Port used to compare the incoming traffic.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.4.1.53
acdSmapIPv4FilterIcmpTypeEn
Enable or disable the ICMP type check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.54
acdSmapIPv4FilterIcmpType
The ICMP type used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.4.1.55
acdSmapIPv4FilterIcmpCodeEn
Enable or disable the ICMP code check.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.22420.2.2.4.1.56
acdSmapIPv4FilterIcmpCode
The ICMP code used to compare the incoming traffic.
Its value ranges from 0 to 255.
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.22420.2.2.4.1.57
acdSmapIPv4FilterSrcPortLast
The UDP/TCP Source Port last value, used in range operation.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.4.1.58
acdSmapIPv4FilterSrcPortOper
The UDP/TCP Source Port operator. Valid operator types are:
Equal to or Range (inclusive range).
AcdFilterOperatorEqualRangeOnlyr/w
Type Values:
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.59
acdSmapIPv4FilterDstPortLast
The UDP/TCP Destination Port last value, used in range operation.
Its value ranges from 0 to 65535.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.22420.2.2.4.1.60
acdSmapIPv4FilterDstPortOper
The UDP/TCP Destination Port operator. Valid operator types are:
Equal to or Range (inclusive range).
AcdFilterOperatorEqualRangeOnlyr/w
Type Values:
3equalTo
4range
 .1.3.6.1.4.1.22420.2.2.4.1.61