acdSmapIPv4FilterRowStatus
ACD-FILTER-MIB ·
.1.3.6.1.4.1.22420.2.2.4.1.3
Object
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy.
Context
- MIB
- ACD-FILTER-MIB
- OID
.1.3.6.1.4.1.22420.2.2.4.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- acdSmapIPv4FilterEntry
- Table
- acdSmapIPv4FilterTable
- Siblings
- 60
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acdSmapIPv4FilterID Unique value for each filter. Its value ranges from 1 to maximum
value. This maximum value depend of the type of platform. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.1 |
| acdSmapIPv4FilterVlan1IdLast First VLAN ID last value, used in range operation.
Its value ranges from 0 to 4095. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.10 |
| acdSmapIPv4FilterVlan1IdOper First VLAN ID operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.11 |
| acdSmapIPv4FilterVlan1CfiEn Enable or disable the first VLAN CFI check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.12 |
| acdSmapIPv4FilterVlan1Cfi The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.13 |
| acdSmapIPv4FilterVlan1TypeEn Enable or disable the first VLAN Ethertype check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.14 |
| acdSmapIPv4FilterVlan1Type VLAN Ethernet type. | column | AcdFilterVlanType | .1.3.6.1.4.1.22420.2.2.4.1.15 |
| acdSmapIPv4FilterVlan2PriorEn Enable or disable the second VLAN priority check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.16 |
| acdSmapIPv4FilterVlan2Prior The second VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.17 |
| acdSmapIPv4FilterVlan2PriorLast Second VLAN priority last value, used in range operation.
Its value ranges from 0 to 7. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.18 |
| acdSmapIPv4FilterVlan2PriorOper VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.19 |
| acdSmapIPv4FilterName This is a string to identify the filter. | column | OctetString | .1.3.6.1.4.1.22420.2.2.4.1.2 |
| acdSmapIPv4FilterVlan2IdEn Enable or disable the second VLAN ID check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.20 |
| acdSmapIPv4FilterVlan2Id The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.21 |
| acdSmapIPv4FilterVlan2IdLast The second VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.22 |
| acdSmapIPv4FilterVlan2IdOper VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.23 |
| acdSmapIPv4FilterVlan2CfiEn Enable or disable the second VLAN CFI check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.24 |
| acdSmapIPv4FilterVlan2Cfi The second VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.25 |
| acdSmapIPv4FilterVlan2TypeEn Enable or disable the second VLAN Ethertype check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.26 |
| acdSmapIPv4FilterVlan2Type VLAN Ethernet type. | column | AcdFilterVlanType | .1.3.6.1.4.1.22420.2.2.4.1.27 |
| acdSmapIPv4FilterSrcEn Enable or disable the Source IP address check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.28 |
| acdSmapIPv4FilterSrc The source IP address used to compare the incoming traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.22420.2.2.4.1.29 |
| acdSmapIPv4FilterSrcMask The source IP address mask used to compare the incoming traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.22420.2.2.4.1.30 |
| acdSmapIPv4FilterDstEn Enable or disable the Destination IP address check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.31 |
| acdSmapIPv4FilterDst The destination IP address used to compare the incoming traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.22420.2.2.4.1.32 |
| acdSmapIPv4FilterDstMask The destination IP address mask used to compare the
incoming traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.22420.2.2.4.1.33 |
| acdSmapIPv4FilterProtoEn Enable or disable the IP protocol check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.34 |
| acdSmapIPv4FilterProto The IP protocol used to compare the incoming traffic.
Its value ranges from 0 to 255. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.35 |
| acdSmapIPv4FilterTTLEn Enable or disable the TTL check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.36 |
| acdSmapIPv4FilterTTL The TTL used to compare the incoming traffic.
Its value ranges from 0 to 255. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.37 |
| acdSmapIPv4FilterIHLEn Enable or disable the IP Header Length check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.38 |
| acdSmapIPv4FilterIHL The IP Header Length used to compare the incoming traffic.
Its value ranges from 5 to 15. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.39 |
| acdSmapIPv4FilterVlan1PriorEn Enable or disable the first VLAN priority check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.4 |
| acdSmapIPv4FilterIpCosEn Enable or disable the Ethernet type check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.40 |
| acdSmapIPv4FilterIpCosMode VLAN ID operator. Valid operator types are: Greater than, Less than,
Equal to or Range (inclusive range). | column | Enumeration | .1.3.6.1.4.1.22420.2.2.4.1.41 |
| acdSmapIPv4FilterDscp The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.42 |
| acdSmapIPv4FilterDscpLast The DSCP value used to compare the incoming traffic.
Its value ranges from 0 to 63. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.43 |
| acdSmapIPv4FilterDscpOper DSCP operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.44 |
| acdSmapIPv4FilterPre The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.45 |
| acdSmapIPv4FilterPreLast The Precedence value used to compare the incoming traffic.
Its value ranges from 0 to 3. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.46 |
| acdSmapIPv4FilterPreOper Precedence operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.47 |
| acdSmapIPv4FilterECNEn Enable or disable the ECN (Explicite Cogestion Notification) check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.48 |
| acdSmapIPv4FilterECN The ECN value used to compare the incoming traffic.
Its value ranges from 0 to 3. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.49 |
| acdSmapIPv4FilterVlan1Prior The first VLAN priority used to compare the incoming traffic.
Its value ranges from 0 to 7. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.5 |
| acdSmapIPv4FilterSrcPortEn Enable or disable the UDP/TCP Source port check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.50 |
| acdSmapIPv4FilterSrcPort The UDP/TCP Source Port used to compare the incoming traffic.
Its value ranges from 0 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.51 |
| acdSmapIPv4FilterDstPortEn Enable or disable the UDP/TCP Destination port check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.52 |
| acdSmapIPv4FilterDstPort The UDP/TCP Destination Port used to compare the incoming traffic.
Its value ranges from 0 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.53 |
| acdSmapIPv4FilterIcmpTypeEn Enable or disable the ICMP type check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.54 |
| acdSmapIPv4FilterIcmpType The ICMP type used to compare the incoming traffic.
Its value ranges from 0 to 255. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.55 |
| acdSmapIPv4FilterIcmpCodeEn Enable or disable the ICMP code check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.56 |
| acdSmapIPv4FilterIcmpCode The ICMP code used to compare the incoming traffic.
Its value ranges from 0 to 255. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.57 |
| acdSmapIPv4FilterSrcPortLast The UDP/TCP Source Port last value, used in range operation.
Its value ranges from 0 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.58 |
| acdSmapIPv4FilterSrcPortOper The UDP/TCP Source Port operator. Valid operator types are:
Equal to or Range (inclusive range). | column | AcdFilterOperatorEqualRangeOnly | .1.3.6.1.4.1.22420.2.2.4.1.59 |
| acdSmapIPv4FilterVlan1PriorLast First VLAN priority last value, used in range operation.
Its value ranges from 0 to 7. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.6 |
| acdSmapIPv4FilterDstPortLast The UDP/TCP Destination Port last value, used in range operation.
Its value ranges from 0 to 65535. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.60 |
| acdSmapIPv4FilterDstPortOper The UDP/TCP Destination Port operator. Valid operator types are:
Equal to or Range (inclusive range). | column | AcdFilterOperatorEqualRangeOnly | .1.3.6.1.4.1.22420.2.2.4.1.61 |
| acdSmapIPv4FilterVlan1PriorOper VLAN Priority operator. Valid operator types are: Greater than,
Less than, Equal to or Range (inclusive range). | column | AcdFilterOperator | .1.3.6.1.4.1.22420.2.2.4.1.7 |
| acdSmapIPv4FilterVlan1IdEn Enable or disable the first VLAN ID check. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.22420.2.2.4.1.8 |
| acdSmapIPv4FilterVlan1Id The first VLAN ID used to compare the incoming traffic.
Its value ranges from 0 to 4095. | column | Unsigned32 | .1.3.6.1.4.1.22420.2.2.4.1.9 |