acdSmapIPv4FilterVlan1Cfi

ACD-FILTER-MIB · .1.3.6.1.4.1.22420.2.2.4.1.13
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
The first VLAN CFI used to compare the incoming traffic.
Its value is 0 or 1.

Context

MIB
ACD-FILTER-MIB
OID
.1.3.6.1.4.1.22420.2.2.4.1.13
Type
column
Access
readwrite
Status
current
Parent
acdSmapIPv4FilterEntry
Table
acdSmapIPv4FilterTable
Siblings
60

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
acdSmapIPv4FilterID
Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.1
acdSmapIPv4FilterVlan1IdLast
First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.10
acdSmapIPv4FilterVlan1IdOper
First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.11
acdSmapIPv4FilterVlan1CfiEn
Enable or disable the first VLAN CFI check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.12
acdSmapIPv4FilterVlan1TypeEn
Enable or disable the first VLAN Ethertype check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.14
acdSmapIPv4FilterVlan1Type
VLAN Ethernet type.
columnAcdFilterVlanType.1.3.6.1.4.1.22420.2.2.4.1.15
acdSmapIPv4FilterVlan2PriorEn
Enable or disable the second VLAN priority check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.16
acdSmapIPv4FilterVlan2Prior
The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.17
acdSmapIPv4FilterVlan2PriorLast
Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.18
acdSmapIPv4FilterVlan2PriorOper
VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.19
acdSmapIPv4FilterName
This is a string to identify the filter.
columnOctetString.1.3.6.1.4.1.22420.2.2.4.1.2
acdSmapIPv4FilterVlan2IdEn
Enable or disable the second VLAN ID check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.20
acdSmapIPv4FilterVlan2Id
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.21
acdSmapIPv4FilterVlan2IdLast
The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.22
acdSmapIPv4FilterVlan2IdOper
VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.23
acdSmapIPv4FilterVlan2CfiEn
Enable or disable the second VLAN CFI check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.24
acdSmapIPv4FilterVlan2Cfi
The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.25
acdSmapIPv4FilterVlan2TypeEn
Enable or disable the second VLAN Ethertype check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.26
acdSmapIPv4FilterVlan2Type
VLAN Ethernet type.
columnAcdFilterVlanType.1.3.6.1.4.1.22420.2.2.4.1.27
acdSmapIPv4FilterSrcEn
Enable or disable the Source IP address check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.28
acdSmapIPv4FilterSrc
The source IP address used to compare the incoming traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.22420.2.2.4.1.29
acdSmapIPv4FilterRowStatus
All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Cre…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.22420.2.2.4.1.3
acdSmapIPv4FilterSrcMask
The source IP address mask used to compare the incoming traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.22420.2.2.4.1.30
acdSmapIPv4FilterDstEn
Enable or disable the Destination IP address check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.31
acdSmapIPv4FilterDst
The destination IP address used to compare the incoming traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.22420.2.2.4.1.32
acdSmapIPv4FilterDstMask
The destination IP address mask used to compare the incoming traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.22420.2.2.4.1.33
acdSmapIPv4FilterProtoEn
Enable or disable the IP protocol check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.34
acdSmapIPv4FilterProto
The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.35
acdSmapIPv4FilterTTLEn
Enable or disable the TTL check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.36
acdSmapIPv4FilterTTL
The TTL used to compare the incoming traffic. Its value ranges from 0 to 255.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.37
acdSmapIPv4FilterIHLEn
Enable or disable the IP Header Length check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.38
acdSmapIPv4FilterIHL
The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.39
acdSmapIPv4FilterVlan1PriorEn
Enable or disable the first VLAN priority check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.4
acdSmapIPv4FilterIpCosEn
Enable or disable the Ethernet type check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.40
acdSmapIPv4FilterIpCosMode
VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnEnumeration.1.3.6.1.4.1.22420.2.2.4.1.41
acdSmapIPv4FilterDscp
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.42
acdSmapIPv4FilterDscpLast
The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.43
acdSmapIPv4FilterDscpOper
DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.44
acdSmapIPv4FilterPre
The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.45
acdSmapIPv4FilterPreLast
The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.46
acdSmapIPv4FilterPreOper
Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.47
acdSmapIPv4FilterECNEn
Enable or disable the ECN (Explicite Cogestion Notification) check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.48
acdSmapIPv4FilterECN
The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.49
acdSmapIPv4FilterVlan1Prior
The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.5
acdSmapIPv4FilterSrcPortEn
Enable or disable the UDP/TCP Source port check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.50
acdSmapIPv4FilterSrcPort
The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.51
acdSmapIPv4FilterDstPortEn
Enable or disable the UDP/TCP Destination port check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.52
acdSmapIPv4FilterDstPort
The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.53
acdSmapIPv4FilterIcmpTypeEn
Enable or disable the ICMP type check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.54
acdSmapIPv4FilterIcmpType
The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.55
acdSmapIPv4FilterIcmpCodeEn
Enable or disable the ICMP code check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.56
acdSmapIPv4FilterIcmpCode
The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.57
acdSmapIPv4FilterSrcPortLast
The UDP/TCP Source Port last value, used in range operation. Its value ranges from 0 to 65535.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.58
acdSmapIPv4FilterSrcPortOper
The UDP/TCP Source Port operator. Valid operator types are: Equal to or Range (inclusive range).
columnAcdFilterOperatorEqualRangeOnly.1.3.6.1.4.1.22420.2.2.4.1.59
acdSmapIPv4FilterVlan1PriorLast
First VLAN priority last value, used in range operation. Its value ranges from 0 to 7.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.6
acdSmapIPv4FilterDstPortLast
The UDP/TCP Destination Port last value, used in range operation. Its value ranges from 0 to 65535.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.60
acdSmapIPv4FilterDstPortOper
The UDP/TCP Destination Port operator. Valid operator types are: Equal to or Range (inclusive range).
columnAcdFilterOperatorEqualRangeOnly.1.3.6.1.4.1.22420.2.2.4.1.61
acdSmapIPv4FilterVlan1PriorOper
VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
columnAcdFilterOperator.1.3.6.1.4.1.22420.2.2.4.1.7
acdSmapIPv4FilterVlan1IdEn
Enable or disable the first VLAN ID check.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.22420.2.2.4.1.8
acdSmapIPv4FilterVlan1Id
The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095.
columnUnsigned32.1.3.6.1.4.1.22420.2.2.4.1.9