A3COM-HUAWEI-DOT11-CFG-MIB Table View

The table defines the parameters for radio policy, as per
radio policy of CLI.
One radio policy could be assigned to the different radios (AP).

h3cDot11RadioPolicyEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1

Each entry contains information of each radio policy.

Indexes

h3cDot11RadioPolicyName

Column	Syntax	OID
h3cDot11RadioPolicyName Represents the name of radio policy.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.1
h3cDot11BeaconInterval Represents the interval for Beacon management frame.	TUSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.2
h3cDot11DtimInterval Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.3
h3cDot11RtsThreshold Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.4
h3cDot11FragThreshold Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.5
h3cDot11ShortRetryThreshold Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.6
h3cDot11LongRetryThreshold Represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.7
h3cDot11MaxRxLifetime Represents the elapsed time. After the time specified by h3cDot11MaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.	millisecondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.8
h3cDot11RdoPolicyRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.9
h3cDot11RdoClientMaxCount Represent the maximum number of stations supported by this radio policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.10
h3cDot11BeaconIntervalMs Represents the interval for Beacon management frame.	msSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.1.1.11

The table defines the parameters for ESS, as per service policy
of CLI.
One service policy could be assigned to the different radios
(AP).

h3cDot11ServicePolicyEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1

Each entry contains information of each service policy.

Indexes

h3cDot11ServicePolicyID

Column	Syntax	OID
h3cDot11ServicePolicyID Represents the ID of each service policy.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.1
h3cDot11SSIDName Represents the ESS. As per CLI, the value of service policy name will be SSID.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11SSIDStringTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.2
h3cDot11SSIDHidden This attribute controls whether the SSID will be advertised in the beacon frame. If it is true, then SSID will not be advertised in the beacon frame.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.3
h3cDot11AuthenMode Represents the Authentication mode defined by 802.11.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11AuthenTyper/w Type Values: 1 none 2 opensystem 3 sharedkey 4 all	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.4
h3cDot11SSIDEncryptionMode Represents the encryption mode for this ESS.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11SSIDEncryptModeTyper/w Type Values: 1 cleartxt 2 cipher 3 ext	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.5
h3cDot11WlanInfBindingType Represents the service policy will bind to what kind of data forwarding interface.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.6
h3cDot11WlanInfBindingID Represents the interface ID of the interface that ESS will bind to. If the value is set to -1, the binding will be removed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.7
h3cDot11SrvPolicyRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.8
h3cDot11ClientMaxCount Represent the maximum number of stations supported by this service policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.9
h3cDot11SPInCirMode CIR(committed information rate) mode of inbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.10
h3cDot11SPInCirValue Represents the CIR of inbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.11
h3cDot11SPOutCirMode CIR(committed information rate) mode of outbound direction. This object is useful only when the corresponding CIR is nonzero. If value of this object is changed, corresponding CIR will be reset.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11CirModer/w Type Values: 1 static 2 dynamic	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.12
h3cDot11SPOutCirValue Represents the CIR of outbound direction of this service policy. If the value is 0, it means that no flow control is applied to the service policy, and the corresponding CIR mode is meaningless.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.13
h3cDot11WlanInfPVID Represents the VLAN ID of SSID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.14
h3cDot11SPInCirStaticValue Represents the CIR of inbound direction for static CIR mode.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.15
h3cDot11SPOutCirStaticValue Represents the CIR of outbound direction for static CIR mode.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.16
h3cDot11SPIsolate If it is true, then stations connected with the service policy are isolated.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.17
h3cDot11WAPIAuthServerIP Represents the IP address of the WAPI Authentication server	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.2.1.18

The table defines the parameters for ESS, as per service policy
of CLI.
When the value of h3cDot11SSIDEncryptionMode equals to cipher(2),
more configuration for a ESS will be put into the table.

h3cDot11ServicePolicyExtEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1

Each entry contains information of each service policy under cipher(2)
mode.

Indexes

h3cDot11ServicePolicyExtID

Column	Syntax	OID
h3cDot11ServicePolicyExtID Represents the ID of each service policy.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.1
h3cDot11SecIEStatus To enable the security Information element in the beacon and probe response frames sent by AP.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11SecIEStatusTyper/w Type Values: 1 none 2 rsn 3 wpa 4 all 5 ext	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.2
h3cDot11SecurityCiphers The WLAN system support the following cipher type for data frame encryption. wep40(2) tkip(4) aesccmp(16) wep104(32) wpisms4(64) wep128(128) For each service policy,it could support multiple cipher types at the same tim…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.3
h3cDot11CipherKeyIndex Represents the key index of cipher key for packet. When h3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.4
h3cDot11CipherKey Represents the cipher key for packet. When h3cDot11SecurityCiphers value is wep40 or wep104, the configuration will take effective.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.5
h3cDot11SrvPolicyExtRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.6
h3cDot11CipherKeyType Represents the cipher key type of h3cDot11CipherKey.	Enumerationr/w Enumerated Values: 1 char 2 hex	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.3.1.7

The table defines the radio policy of each radio.
It can't be modified if the radio policy is a default radio policy.

h3cDot11RadioPolicyExtEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1

Each entry contains information of each radio policy.

Indexes

h3cDot11RPAPSerialID h3cDot11RPRadioID

Column	Syntax	OID
h3cDot11RPAPSerialID This object represents the Serial ID of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.1
h3cDot11RPRadioID This object represents each radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.2
h3cDot11RPBeaconInterval This object represents the interval for Beacon management frame.	millisecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.3
h3cDot11RPDtimInterval This object represents the number of beacon intervals that shall elapse between transmissions of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM count field is 0. This value is transmitted in…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.4
h3cDot11RPRtsThreshold This object represents the current minimum size, in octets, of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.5
h3cDot11RPFragThreshold This object represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers a…	byteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.6
h3cDot11RPShortRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.7
h3cDot11RPLongRetryThreshold This object represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RTSThreshold, and that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.8
h3cDot11RPClientMaxCount This object represents the maximum number of stations supported by this radio policy.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.4.1.9

This table defines the WLAN security status for ESS, BSS and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
h3cPortSecurityTables should be used to configure port security.

h3cDot11SrvPortSecurityEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1

There is a row in this table for service policy.

Indexes

h3cDot11SecurityServicePolicyID

Column	Syntax	OID
h3cDot11SecurityServicePolicyID Represents the ID of each service policy.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1.1
h3cDot11SrvPortSecurityMode Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is…	Enumerationr/w Enumerated Values: 1 noRestrictions 2 userLoginSecureExt 3 psk 4 macAddressAndPsk 5 userLoginSecureExtOrPsk 6 ext	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1.2
h3cDot11SrvSecurityKeyType This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type.…	Enumerationr/w Enumerated Values: 1 userLoginTxKeyTypeNone 2 userLoginTxKeyTypeDot11Key 3 userLoginTxKeyTypeRsaRC4Key	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1.3
h3cDot11SrvSecurityPskKeyMode This is the password input mode. When input as pskKeyModePassPhrase, h3cDot11SrvSecurityPskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, h3cDot11SrvSecurityPskKeyString must be 64 characters and …	Enumerationr/w Enumerated Values: 1 pskKeyModeNone 2 pskKeyModePassPhrase 3 pskKeyModeRawKey	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1.4
h3cDot11SrvSecurityPskKeyString This is the password string used for psk authentication.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.5.1.5

The table defines the parameters of each service policy.

h3cDot11SrvPolicyExtendEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.2.6.1

Each entry contains information of each service policy.

Indexes

h3cDot11ServicePolicyID

Column	Syntax	OID
h3cDot11SPEnable Represents whether the service policy is enabled.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.43.45.1.10.2.75.4.2.6.1.1

By AP template CLI, administrator will configure the parameters of AP
by convenience.
Before AP boot up and connect to AC by CAPWAP tunnel, administrator
will create AP template for each AP. When AP connect to AC,
AC will assign configuration to AP by h3cDot11APSerialID
information in AP template.

h3cDot11APTemplateEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1

Each entry contains configuration information for each AP.

Indexes

h3cDot11APTemplateName

Column	Syntax	OID
h3cDot11APTemplateName Represents the name of AP template.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.1
h3cDot11APSerialID Represents AP serial id.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.2
h3cDot11TemplateAPModelAlias Represents the alias of AP model name.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.3
h3cDot11Description This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.4
h3cDot11APWorkMode Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device de…	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.5
h3cDot11APTemplateRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.6
h3cDot11APName Represents the AP name.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.7
h3cDot11StatisInterv Represents the interval of radio statistic.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.8
h3cDot11APBroadcastProbeReply Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.9
h3cDot11StaIdleTimerInterv Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.10
h3cDot11StaKeepAliveTimerInterv Represents the interval of the keep alive requests sent between AP and STA.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.11
h3cDot11APCir Represents the committed information rate between AP and AC.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.12
h3cDot11APCbs Represents the committed burst size between AP and AC.	BytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.13
h3cDot11APPriorityLevel This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.14
h3cDot11APElementID This object represents the AP element ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.15
h3cDot11APDevDetectEnable Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.16
h3cDot11APGetIPMethod This object represents the method how AP gets IP address.	Enumerationr/w Enumerated Values: 1 dhcpAlloc 2 static	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.17
h3cDot11StatisIntervMode This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s	Enumerationr/w Enumerated Values: 1 normal 2 realtime	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.18
h3cDot11ApTrapEnabled Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.19

Before AP connects to AC, administrator will configure radio
parameter to each radio.

h3cDot11RadioToConfigEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1

Each entry contains configuration information for each radio.

Indexes

h3cDot11APTemplateNameCfg h3cDot11CfgRadioID

Column	Syntax	OID
h3cDot11APTemplateNameCfg Represents the name of AP template.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.1
h3cDot11CfgRadioID Represents each radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.2
h3cDot11CfgRadioPolicyName Represents the name of radio policy.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.3
h3cDot11CfgRadioType Represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.4
h3cDot11CfgChannel Represents the channel allocation of radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.5
h3cDot11CfgMaxTxPowerLevel Represents the maximal transmit power scope for AP.	dbmA3COM-HUAWEI-DOT11-REF-MIBH3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.6
h3cDot11PreambleLen Represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be valid. Othwise, the value for it will be invalid.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.7
h3cDot11CfgRadioStatus Represents the radio admin status whether is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.8
h3cDot11CfgRdElementID Represents the element ID of this radio. It comprises two parts. The highest 24 bits are AP element ID and the lowest 8 bits are radio ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.9
h3cDot11CfgWorkMode Represents work mode of the radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11WorkModer/w Type Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.10
h3cDot11CfgPwrAttValue Represents the value of power attenuation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.11
h3cDot11RadioTxArithmetic Represents the transmission arithmetic of the radio. The following values are supported: quality(1) - Consider the quality first during the transmission. bandwidth(2) - Consider the bandwidth first during the transmiss…	Enumerationr/w Enumerated Values: 1 quality 2 bandwidth	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.12
h3cDot11CfgChannelLockStat Represents locked status of channel on the radio.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.13
h3cDot11CfgPowerLockStat Represents locked status of power on the radio.	Enumerationr/w Enumerated Values: 1 unlocked 2 locked	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.14
h3cDot11CfgLBRdGroupId Represents the load balance group ID allocated for the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.15
h3cDot11CfgRRMSDRdGroupId Represents the RRM self-decisive group ID allocated for the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.16
h3cDot11CfgRadioType2 Represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.17
h3cDot11CfgIDSEnable Represents whether intrusion detection is enabled for this radio.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.18
h3cDot11CfgSaEnable Represents whether spectrum analysis is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.19
h3cDot11CfgSaCltRtFFTData Represents whether to collect real-time FFT data for this radio.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.20
h3cDot11CfgSaBand Represents which band of channels will be monitored when collection real-time FFT data is enabled for this radio. Detection of interference devices and air quality will also be affected. Each band responds to the foll…	Enumerationr/w Enumerated Values: 1 dot11g 2 dot11aLower 3 dot11aMiddle 4 dot11aUpper	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.2.1.21

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

h3cDot11APServiceSetEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.3.1

Each entry contains service policy information for each
specific radio of AP.

Indexes

h3cDot11APTemplateNameCfg h3cDot11CfgRadioID h3cDot11CfgServicePolicyID

Column	Syntax	OID
h3cDot11CfgServicePolicyID Represents the ID of each service policy used by the AP.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.3.1.1
h3cDot11SrvSetRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.3.1.2
h3cDot11ServiceSetVlanId Represents the Vlan ID of BSS which is generated when service policy is binded with the Radio.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.3.1.3

The table of the system information for each AP.

h3cDot11APSysInfoSetEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.4.1

The system information configuration for each AP.

Indexes

h3cDot11SIDAPSerialID

Column	Syntax	OID
h3cDot11APSysNetID Represents the system Net ID for AP.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.4.1.1
h3cDot11APCpuUsageThreshold The CPU usage threshold for AP.	onepercentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.4.1.2
h3cDot11APMemUsageThreshold The memory usage threshold for AP.	onepercentInteger32r/w Constraints: range: 0-100	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.4.1.3

For each connected APs, administrator could configure a series of
limits.  This table describes the limit information for AP(s).

h3cDot11APLimitEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.5.1

Each entry contains the limit information for each AP.

Indexes

A3COM-HUAWEI-DOT11-REF-MIBh3cDot11APElementIndex

Column	Syntax	OID
h3cDot11APSsidNumLimit Represents the upper limit of service template binded with this AP. All radios of AP share this limit. Default value 0 : There is no upper limit of service template binded with this AP.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.5.1.1
h3cDot11APUserCntLimit Represents the upper limit of user which has access to this AP. All BSSs binded with AP share this limit. Default value 0 : There is no upper limit of user which has access to this AP.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.5.1.2
h3cDot11APUserThreshold Represents the threshold of user which has access to this AP. All BSSs binded with AP share this limit. If the user counter is overflow, the trap will be sent. Default value 0 : There is no threshold of user which has…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.5.1.3

The table of the interface information for each AP.

h3cDot11APIfSetEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.6.1

The interface information configuration for each AP.

Indexes

A3COM-HUAWEI-DOT11-REF-MIBh3cDot11APElementIndex h3cDot11APSetIfIndex

Column	Syntax	OID
h3cDot11APSetIfIndex Represents the index for a interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.6.1.1
h3cDot11APIfAlias This object is an 'alias' name for the interface as specified by a network manager for AP.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.6.1.2

For all the radios on the AP, it could configure multiple service policies.
The table describes the relationship between AP and
service policies.

h3cDot11APServiceVlanEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.7.1

Each entry contains service policy information for each AP.

Indexes

h3cDot11APServiceVlanSerialID h3cDot11APServiceVlanSPID

Column	Syntax	OID
h3cDot11APServiceVlanSerialID This object represents AP serial id.	OctetString	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.7.1.1
h3cDot11APServiceVlanSPID This object represents the ID of each service policy used by the AP.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.7.1.2
h3cDot11APServiceVlanId This object represents the VLAN ID of BSS which is generated when the service policy is bound to the radio.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.7.1.3
h3cDot11APServiceVlanRowStatus This object represents the status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.7.1.4

Before AP connects to AC, administrator will configure radio
parameter to each radio.

h3cDot11RadioConfigEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1

Each entry contains configuration information for each radio.

Indexes

h3cDot11RCAPSerialID h3cDot11RCRadioID

Column	Syntax	OID
h3cDot11RCAPSerialID This object represents the Serial ID of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.1
h3cDot11RCRadioID This object represents each radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.2
h3cDot11RCRadioType This object represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.3
h3cDot11RCChannel This object represents the channel allocation of radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.4
h3cDot11RCPreambleLen This object represents whether use long or short preamble for 802.11 MAC frame. When h3cDot11CfgRadioType is either dot11b or dot11g, then value for h3cDot11PreambleLen will be valid. Otherwise, the value for it will be…	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.5
h3cDot11RCPwrAttValue This object represents the value of power attenuation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.6
h3cDot11RCApPowerLevel Represents the maximal transmit power scope for AP.	dbmA3COM-HUAWEI-DOT11-REF-MIBH3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.7
h3cDot11RCDynamicChlState Enable/Disable dynamic channel selection.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.8
h3cDot11RCDynamicPowerState Enable/Disable dynamic power selection for the band.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.9
h3cDot11RCRadioStatus Represents the radio admin status whether is enabled or disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.10
h3cDot11RCRadioRate Set data transmit rates for the radio, in the format of 1,2,5.5... For 802.11n radios, the format can be MCS X. The data transmit rates between AP and STA must fall into the configured rates. (Note: For 802.11n radios, …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.11
h3cDot11RCPwrAdjustStepLength Power adjustment step-length in dBm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.12
h3cDot11RCRadioType2 This object represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.13

For each radio, it could configure multiple service policies.
The table describes the relationship between radio and
service policies.

h3cDot11RadioSSIDCfgEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1

Each entry contains SSID configuration information for each radio.

Indexes

h3cDot11RadioSSIDSerialID h3cDot11RadioSSIDRadioID h3cDot11RadioSSIDWLANID

Column	Syntax	OID
h3cDot11RadioSSIDSerialID This object represents the serial ID of AP.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ObjectIDType Type Constraints: range: 0..127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.1
h3cDot11RadioSSIDRadioID This object represents each radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.2
h3cDot11RadioSSIDWLANID This object represents the WLAN ID of the BSSID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.3
h3cDot11RadioSSIDIndex This object represents the ID of each service policy used by the radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.4
h3cDot11RadioBSSID As MAC address format, it is used to identify BSS.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.5
h3cDot11RadioSSIDRowStatus RowStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.9.1.6

The table will provide the general information about APs.

h3cDot11APSerialIDEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1

Each entry contains the general information of an AP.

Indexes

h3cDot11SIDAPSerialID

Column	Syntax	OID
h3cDot11SIDAPSerialID Represents AP serial id.	OctetString	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.1
h3cDot11SIDAPWorkMode Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - AP will supply WLAN service and Device detection i…	Enumerationr/w Enumerated Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.2
h3cDot11SIDAPGetIPMethod This object represents the method how AP gets IP address.	Enumerationr/w Enumerated Values: 1 dhcpAlloc 2 static	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.3
h3cDot11SIDAPTemplateName Represents the name of AP template.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.4
h3cDot11SIDModelAlias Represents the alias of AP model name.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.5
h3cDot11SIDAPDescription This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description will be removed.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.6
h3cDot11SIDRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.7
h3cDot11SIDAPName Represents the AP name.	OctetStringr/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.8
h3cDot11SIDStatisInterv Represents the interval of radio statistic.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.9
h3cDot11SIDAPBroadcastProbeReply Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.10
h3cDot11SIDAPStaIdleTimerInterv Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.11
h3cDot11SIDStaKeepAliveTimerInterv Represents the interval of the keep alive requests sent between AP and STA.	secondSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.12
h3cDot11SIDAPCir Represents the committed information rate between AP and AC.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.13
h3cDot11SIDAPCbs Represents the committed burst size between AP and AC.	BytesSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.14
h3cDot11SIDAPPriorityLevel This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.15
h3cDot11SIDAPElementID This object represents the AP element ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.16
h3cDot11SIDAPDevDetectEnable Represents whether device detection is enabled or not. 'true' : Device detection is enabled. 'false': Device detection is disabled. If device detection is enabled, the AP will provide both device detection and WLAN data…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.17
h3cDot11SIDAPStatisIntervMode This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s	Enumerationr/w Enumerated Values: 1 normal 2 realtime	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.10.1.18

For each service policy, it could be bind to several VLANs.
The table describes the relationship between VLAN and
service policies.

h3cDot11APSTVlanEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.3.11.1

Each entry contains VLAN and service policy information for each
specific radio of AP.

Indexes

h3cDot11SIDAPSerialID h3cDot11CfgRadioID h3cDot11CfgServicePolicyID

Column	Syntax	OID
h3cDot11CfgSTVLANID Represents the VLAN that current Service Policy have bind to.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.11.1.1
h3cDot11CfgSTNASPortID Represents the NAS Port ID of current Service Policy for each specific radio of AP.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.11.1.2
h3cDot11CfgServiceSetRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.3.11.1.3

The table defines the parameters for radio in AP, as per
radio.

h3cDot11RadioIntfConfigEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1

Each entry contains information of each radio in AP.

Indexes

h3cDot11RadioIfIdx

Column	Syntax	OID
h3cDot11RadioIfIdx Represents the Radio IfIndex of radio in AP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.1
h3cDot11RadioCfgBeaconIntvl Represents the interval for Beacon management frame.	TUSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.2
h3cDot11RadioCfgDtimIntvl Represents the number of beacon intervals that shall elapse between transmission of Beacons frames containing a Traffic Indication Map (TIM) element whose DTIM Count field is 0. This value is transmitted in the Delivery…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.3
h3cDot11RadioCfgRtsThreshold Represents the current minimum size,in octets,of the MAC protocol data unit (MPDU), below which a Request to send/Clear to send (RTS/CTS) handshake shall not be performed.	ByteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.4
h3cDot11RadioCfgFragThreshold Represents the current maximum size, in octets, of the MPDU that may be delivered to the PHY. A MSDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers.	ByteSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.5
h3cDot11RadioCfgShtRetryThld Represents the maximum number of transmission attempts of a frame, the length of which is less than or equal to h3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.6
h3cDot11RadioCfglongRtrThld Represents the maximum number of transmission attempts of a frame, the length of which is longer than h3cDot11RadioRTSThreshold, that shall be made before a failure condition is indicated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.7
h3cDot11RadioCfgMaxRxLifetime Represents the elapsed time. After the time specified by h3cDot11RadioCfgMaxRxLifetime, the further attempts to reassemble the MSDU shall be terminated.	millisecondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.8
h3cDot11RadioCfgType Represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioTyper/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.9
h3cDot11RadioCfgChannel Represents the channel allocation of radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ChannelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.10
h3cDot11RadioCfgMaxTxPwrLvl Represents the maximal transmit power scope for AP.	dbmA3COM-HUAWEI-DOT11-REF-MIBH3cDot11TxPwrLevelScopeTyper/w	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.11
h3cDot11RadioCfgPreambleLen Represents whether use long or short preamble for 802.11 MAC frame.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11PreambleTyper/w Type Values: 1 long 2 short	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.12
h3cDot11RadioCfgWorkMode Represents work mode of the radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11WorkModer/w Type Values: 1 normal 2 monitor 3 hybrid	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.13
h3cDot11RadioCfgOnly11gEnable Represents whether enable only 802.11g radio mode or not. 'true' : Only 802.11g radio mode is enabled. 'false': Only 802.11g radio mode is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.14
h3cDot11RadioCfgType2 Represents the radio will work with which 802.11 radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType2r/w Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11an 16 dot11gn	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.1.1.15

The table defines the binding information for each radio in AP.

h3cDot11RadioIntfBindEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.4.2.1

Each entry contains the radio interface binding information
in AP.

Indexes

h3cDot11RadioIfIdx h3cDot11RadioIntfBindSvcPlcyID

Column	Syntax	OID
h3cDot11RadioIntfBindSvcPlcyID Represents the ID of each service policy.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ServicePolicyIDType	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.2.1.1
h3cDot11RadioIntfBindIfIdx Represents the Ifindex of interface which is binded to the radio.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.2.1.2
h3cDot11RadioIntfBindRowStatus The status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.4.2.1.3

Table will provide data rate configuration for a specific radio type.

h3cDot11DataRateConfigEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1

Each entry of the table will provide data rate configuration for a
specific radio type.

Indexes

h3cDot11RadioTypeID

Column	Syntax	OID
h3cDot11RadioTypeID Represents the radio type.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType Type Values: 1 dot11a 2 dot11b 4 dot11g 8 dot11n 16 dot11gn 32 dot11an	.1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1.1
h3cDot11SupportedRateSet Represents the supported rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1.2
h3cDot11MandatoryRateSet Represents the mandatory rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1.3
h3cDot11DisabledRateSet Represents the disabled rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1.4
h3cDot11SmartRateSet Represents the rate set of a particular radio type.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.43.45.1.10.2.75.4.5.1.1.5

This table is used to configure WLAN ESS interface.

h3cDot11WlanEssIfEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.6.1.1

Each entry contains the WLAN ESS interface configuration.

Indexes

h3cDot11WlanEssIfNumber

Column	Syntax	OID
h3cDot11WlanEssIfNumber This node represents the WLAN ESS interface number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.1.1.1
h3cDot11WlanEssIfIndex This node represents the ifIndex of WLAN-ESS interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.1.1.2
h3cDot11WlanEssRowStatus This node represents the WLAN ESS interface row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.1.1.3

This table is used to configure WLAN BSS interface.

h3cDot11WlanBssIfEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.6.2.1

Each entry contains the WLAN BSS interface configuration.

Indexes

h3cDot11WlanBssIfNumber

Column	Syntax	OID
h3cDot11WlanBssIfNumber This node represents the WLAN BSS interface number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.2.1.1
h3cDot11WlanBssIfIndex This node represents the ifIndex of WLAN-BSS interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.2.1.2
h3cDot11WlanBssRowStatus This node represents the WLAN BSS interface row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.2.1.3

This table is used to configure WLAN Ethernet interface.

h3cDot11WLANEthernetIfEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.6.3.1

Each entry contains the WLAN Ethernet interface configuration.

Indexes

h3cDot11WlanEthernetIfNumber

Column	Syntax	OID
h3cDot11WlanEthernetIfNumber This node represents the WLAN Ethernet interface number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.3.1.1
h3cDot11WLANEthernetIfIndex This node represents the ifIndex of WLAN-Ethernet interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.3.1.2
h3cDot11WlanEthernetRowStatus This node represents the Wlan Ethernet interface row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.3.1.3

This table defines the WLAN security status for ESS, BSS, mesh and
WLAN-Ethernet interface which binding the crypto service-template.
Otherwise, when binding the clear service-template,
h3cPortSecurityTables should be used to configure port security.

h3cDot11PortSecurityEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.6.4.1

There is a row in this table for each ESS, BSS and WLAN-Ethernet
interface.It is indexed using the object ifIndex in RFC1213-MIB.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
h3cDot11PortSecurityMode Determines the security modes of the WLAN port. noRestrictions(1) The default value,no any security mode is set. userLoginSecureExt(2) Access to the port is denied until the port client is…	Enumerationr/w Enumerated Values: 1 noRestrictions 2 userLoginSecureExt 3 psk 4 macAddressAndPsk 5 userLoginSecureExtOrPsk 6 ext	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.4.1.1
h3cDot11SecurityUserLoginTxKeyType This indicates the key type in the 802.1X EAPOL_Key packet. userLoginTxKeyTypeNone(1) This means the key type is not set yet. userLoginTxKeyTypeDot11Key(2) This selects the 802.11 key type.…	Enumerationr/w Enumerated Values: 1 userLoginTxKeyTypeNone 2 userLoginTxKeyTypeDot11Key 3 userLoginTxKeyTypeRsaRC4Key	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.4.1.2
h3cDot11SecurityPskKeyMode This is the password input mode. When input as pskKeyModePassPhrase, h3cDot11SecurePskKeyString must be 8 to 63 characters; when input as pskKeyModeRawKey, h3cDot11SecurePskKeyString must be 64 characters and each chara…	Enumerationr/w Enumerated Values: 1 pskKeyModeNone 2 pskKeyModePassPhrase 3 pskKeyModeRawKey	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.4.1.3
h3cDot11SecurityPskKeyString This is the password string used for psk authentication.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.4.1.4

This table is used to configure WLAN mesh interface.

h3cDot11WlanMeshIfEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.6.5.1

Each entry contains the WLAN mesh interface configuration.

Indexes

h3cDot11WlanMeshIfNumber

Column	Syntax	OID
h3cDot11WlanMeshIfNumber This node represents the WLAN mesh interface number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.5.1.1
h3cDot11WlanMeshIfIndex This node represents the index of WLAN mesh interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.5.1.2
h3cDot11WlanMeshRowStatus This node represents the WLAN mesh interface row status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.43.45.1.10.2.75.4.6.5.1.3

This table is used to configure dot11n on the radio.

h3cDot11nRadioCfgEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1

This entry contains the dot11n configuration on the radio.

Indexes

h3cDot11nRadioCfgIndex

Column	Syntax	OID
h3cDot11nRadioCfgIndex Represents index of the radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioElementIndex	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.1
h3cDot11nAMpduEnable Enable the function of A-MPDU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.2
h3cDot11nAMsduEnable Enable the function of A-MSDU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.3
h3cDot11nClientDot11nOnly Only permit clients of 11n mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.4
h3cDot11nChanelBand Specify the bandwidth mode.	Enumerationr/w Enumerated Values: 1 mode20 2 mode40	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.5
h3cDot11nShortGiEnable The function of Short GI.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.1.1.6

This table is used to configure WDS on the radio.

h3cDot11RadioWDSEntry row .1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1

Each entry contains the WDS configuration on the radio.

Indexes

h3cDot11RadioWDSIndex

Column	Syntax	OID
h3cDot11RadioWDSIndex Represents the element index of radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioElementIndex	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1.1
h3cDot11RadioWDSMode Represents enable the WDS mode or not. nowds: The WDS mode is disabled. wds : The WDS mode is enabled	Enumerationr/w Enumerated Values: 1 nowds 2 wds	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1.2
h3cDot11RadioWDSNetWorkID Represents the mesh ID of WDS.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1.3
h3cDot11WDSSecPskKeyMode Represents the PSK mode of WDS.	Enumerationr/w Enumerated Values: 1 pskKeyModeNone 2 pskKeyModePassPhrase 3 pskKeyModeRawKey	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1.4
h3cDot11WDSSecPskKeyString Represents the PSK value of WDS.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.2.1.5

This table is used to configure dot11n on the radio.

h3cDot11nRadioCfg2Entry row .1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1

This entry contains the dot11n configuration on the radio.

Indexes

h3cDot11nRadioCfg2APIDIndex h3cDot11nRadioCfg2RadioIDIndex

Column	Syntax	OID
h3cDot11nRadioCfg2APIDIndex Represents index of the AP.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ObjectIDType Type Constraints: range: 0..127	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.1
h3cDot11nRadioCfg2RadioIDIndex Represents index of the radio.	A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.2
h3cDot11nRadioCfg2AMpduEnable Enable the function of A-MPDU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.3
h3cDot11nRadioCfg2AMsduEnable Enable the function of A-MSDU.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.4
h3cDot11nRadioCfg2ClientDot11nOnly Only permit clients of 11n mode.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.5
h3cDot11nRadioCfg2ChannelBand Specify the bandwidth mode.	Enumerationr/w Enumerated Values: 1 mode20 2 mode40	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.6
h3cDot11nRadioCfg2ShortGiEnable Enable the function of Short GI.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.43.45.1.10.2.75.4.8.3.1.7