h3cDot11RCChannel
A3COM-HUAWEI-DOT11-CFG-MIB ·
.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.4
Object
This object represents the channel allocation of radio.
Context
- MIB
- A3COM-HUAWEI-DOT11-CFG-MIB
- OID
.1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- h3cDot11RadioConfigEntry
- Table
- h3cDot11RadioConfigTable
- Siblings
- 12
Syntax
A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ChannelScopeType
- Source
- A3COM-HUAWEI-DOT11-REF-MIBH3cDot11ChannelScopeType
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| h3cDot11RCAPSerialID This object represents the Serial ID of AP. | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.1 |
| h3cDot11RCRadioStatus Represents the radio admin status whether is enabled
or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.10 |
| h3cDot11RCRadioRate Set data transmit rates for the radio, in the format of 1,2,5.5...
For 802.11n radios, the format can be MCS X. The data transmit rates
between AP and STA must fall into the confi… | column | OctetString | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.11 |
| h3cDot11RCPwrAdjustStepLength Power adjustment step-length in dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.12 |
| h3cDot11RCRadioType2 This object represents the radio will work with which 802.11 radio
type. | column | A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType2 | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.13 |
| h3cDot11RCRadioID This object represents each radio. | column | A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioScopeType | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.2 |
| h3cDot11RCRadioType This object represents the radio will work with which 802.11 radio
type. | column | A3COM-HUAWEI-DOT11-REF-MIBH3cDot11RadioType | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.3 |
| h3cDot11RCPreambleLen This object represents whether use long or short preamble for 802.11
MAC frame.
When h3cDot11CfgRadioType is either dot11b or dot11g,
then value for h3cDot11PreambleLen will be va… | column | A3COM-HUAWEI-DOT11-REF-MIBH3cDot11PreambleType | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.5 |
| h3cDot11RCPwrAttValue This object represents the value of power attenuation. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.6 |
| h3cDot11RCApPowerLevel Represents the maximal transmit power scope for AP. | column | dbm A3COM-HUAWEI-DOT11-REF-MIBH3cDot11TxPwrLevelScopeType | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.7 |
| h3cDot11RCDynamicChlState Enable/Disable dynamic channel selection. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.8 |
| h3cDot11RCDynamicPowerState Enable/Disable dynamic power selection for the band. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.43.45.1.10.2.75.4.3.8.1.9 |