h3cDot11APDevDetectEnable

A3COM-HUAWEI-DOT11-CFG-MIB · .1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.16
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Represents whether device detection is enabled or not.
'true' : Device detection is enabled.
'false': Device detection is disabled.
If device detection is enabled, the AP will provide both device
detection and WLAN data services.
By default, the AP only provides WLAN data services.  When an AP works
in monitor mode, that is, the value of object h3cDot11APWorkMode is
monitor, device detection can not be enabled with object
h3cDot11APDevDetectEnable.

Context

MIB
A3COM-HUAWEI-DOT11-CFG-MIB
OID
.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.16
Type
column
Access
readwrite
Status
current
Parent
h3cDot11APTemplateEntry
Table
h3cDot11APTemplateTable
Siblings
18

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cDot11APTemplateName
Represents the name of AP template.
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.1
h3cDot11StaIdleTimerInterv
Represents the interval for which the link between AP and STA ( power-save or awake ) can be idle.
columnsecond SNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.10
h3cDot11StaKeepAliveTimerInterv
Represents the interval of the keep alive requests sent between AP and STA.
columnsecond SNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.11
h3cDot11APCir
Represents the committed information rate between AP and AC.
columnKbps SNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.12
h3cDot11APCbs
Represents the committed burst size between AP and AC.
columnBytes SNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.13
h3cDot11APPriorityLevel
This object represents the connection priority for the AP. If the connection priority is 7, the AC is considered as the primary AC for the AP.
columnInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.14
h3cDot11APElementID
This object represents the AP element ID.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.15
h3cDot11APGetIPMethod
This object represents the method how AP gets IP address.
columnEnumeration.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.17
h3cDot11StatisIntervMode
This object represents the mode of statics interval. normal - statics interval value between 10s to 120s realtime - statics interval value between 2s to 5s
columnEnumeration.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.18
h3cDot11ApTrapEnabled
Represents whether the trap status is enabled or not. 'true' : Enable the trap status; 'false' : Disable the trap status.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.19
h3cDot11APSerialID
Represents AP serial id.
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.2
h3cDot11TemplateAPModelAlias
Represents the alias of AP model name.
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.3
h3cDot11Description
This attribute will give more information about AP. Administrator could suggest the location, owner or other information for each AP. If the value is set to NULL, the description …
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.4
h3cDot11APWorkMode
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to find attack. hybrid - A…
columnEnumeration.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.5
h3cDot11APTemplateRowStatus
The status of this table entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.6
h3cDot11APName
Represents the AP name.
columnOctetString.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.7
h3cDot11StatisInterv
Represents the interval of radio statistic.
columnsecond SNMPv2-SMIInteger32.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.8
h3cDot11APBroadcastProbeReply
Represents enable the AP to reply broadcast probe or not. 'true' : The AP to reply broadcast probe is enabled. 'false': The AP to reply broadcast probe is disabled
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.43.45.1.10.2.75.4.3.1.1.9