aal2VclRasTimer
ZhoneAAL2-MIB ·
.1.3.6.1.4.1.5504.4.2.1.1.1.24
Object
The reassembly timer RAS_Timer assures that the
reassembly of an SSSAR-SDU does not exceed a
certain time; if such timer supervision is not
required, the timer is disabled by setting the
timer value to 0.
If the timer is exceeded the i366.1 receive state
machine goes into the abort state, look for the
end of the frame and goes back to idle. See figure
8.1 I.366.2 State transition diagram.
The default is 0 milliseconds. Value of 0 means the
timer is disabled.
Context
- MIB
- ZhoneAAL2-MIB
- OID
.1.3.6.1.4.1.5504.4.2.1.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- aal2VclEntry
- Table
- aal2VclTable
- Siblings
- 26
Syntax
milliseconds SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmVccAal2AppId STR-VMOA-LES-01-00 4.1.1 Application Identifier (AppId)
The Application Identifier (AppId) specifies protocol
combinations used between IWFs.
The … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.1 |
| aal2VclNextCid The Channel Identifier is one of the indicies for
the CID table, aal2CidTable. The Application Identifier,
atmVccAal2AppId, determines the valid range of values for
the aal2Cid… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.10 |
| aal2VclTimerCU Value of the 'combined use' Timer_CU.
The combined use Timer_CU assures that CPS-Packets
with one or more octets already packed, wait at
most the duration of Timer_CU before b… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.11 |
| aal2VclAudioService The service provided is the transfer of audio
signals (voice, voiceband data, and facsimile).
The data unit traversing the SAP (SSCS SDU)
contains either a voice … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.12 |
| aal2VclCircuitModeData The service provided is the transfer of circuit
mode data. The circuit mode data service is an
emulation of the N*64 kbit/s (N = 1, 2, ..., 30)
unrestricted, 8 kHz structured ci… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.13 |
| aal2VclFrameModeData Frame mode data is an intermittent data stream
containing delimited units of information,
possibly of varying size, with idle intervals
between them.
The service… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.14 |
| aal2VclFaxDemoRemo Facsimile Demodulation/Remodulation is the
process of detecting facsimile traffic,
extracting digital information from the
incoming analogue modulated signal,
transporting thi… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.15 |
| aal2VclCAS Channel Associated Signalling Bits are bits
dedicated for connection control across a 1544
kbit/s or 2048 kbit/s interface that carries
64 kbit/s channels. Procedures are based … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.16 |
| aal2VclTrunkType Trunk type specifies the signaling method currently
used. Valid types are loop start,ground start and
loop reverse battery. The default value is loop start.
An instance of this ob… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.17 |
| aal2VclDTMFDialedDigits DTMF Dialed Digits
Dialed Digits are multifrequency audio tones
typically used for inter-register signalling of
addresses during call set-up or for end-to-end
de… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.18 |
| aal2VclMfR1DialedDigits MF-R1 Dialed Digits.
See description for atmVccAal2DTMFDialedDigits.
Valid values are enabled and disabled. | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.19 |
| atmVccAal2VccI STR-VMOA-LES-01-00 4.1.2 VCC Identifier (VCCI)
To distinguish multiple VCCs, each shall be
assigned a VCCI. The creator of an SVC shall
assign its VCCI. The VCCI… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.2 |
| aal2VclMfR2DialedDigits MF-R2 Dialed Digits.
See description for atmVccAal2DTMFDialedDigits.
Valid values are enabled and disabled. | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.20 |
| aal2VclPCMEncoding Encoding Data Unit is an octet-aligned
concatenation of one or more frames of an
audio algorithm, entailing a specific format
of the bits. Every audio packet and SDU
contains… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.21 |
| aal2VclMaxLengthFrame Maximum length for frame mode data.
Valid values are 1..65535. | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.22 |
| aal2VclMaxSDULength Max_SDU_Length indicates the maximum size
SSSAR-SDU, in octets, that is allowed to be
reassembled. Significance to peer-to-peer.
The maximum size of an SSSAR-SDU… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.23 |
| aal2VclCellsReceived Total cells received | column | cells SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.1.1.25 |
| aal2VclCellsSent Total cells sent | column | cells SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.1.1.26 |
| aal2VclStatsTimeElapsed The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.27 |
| atmVccAal2SigVccI STR-VMOA-LES-01-00 4.1.3 Signaling VCC Identifier (SigVCCI)
If an AAL2 VCC is controlled by CCS, then
SigVCCI = VCCI is indicated. Conversely if
SigVCCI = VCCI t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.3 |
| aal2VclAudioProfileIdentifier The Audio Profile for this VCL entry is specified
by the Audio Profile identifier. The range of
valid Audio Profile identifiers is well-defined.
The Audio Profile identifier in… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.4 |
| aal2VclSscsDefaultType STR-VMOA-LES-01-00 4.1.4 SSCS Type
The SSCS type that applies to each channel of
an AAL2 VCC will vary according to the usage
of that channel. Channels that are … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.5 |
| aal2VclMaxCpsSduSize Maximum length of a CPS-SDU (Max_CPS-SDU_Length).
Permitted values: 45 or 64 octets. | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.6 |
| aal2VclMaxNumberMultiplexChannels Maximum number of multiplexed channels.
Peer-to-peer significance. Valid range
of values is 1..255. | column | channels Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.7 |
| aal2VclMinCidForAal2UserChannels Minimum CID value for AAL2 user channels.
Valid range is 1..255.
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
then the valid range for aal2VclMinCidForA… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.8 |
| aal2VclMaxCidForAal2UserChannels Maximum CID value for AAL2 user channels. Valid
range is 1..255. Maximum CID is 255.
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
then the valid range… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.9 |