aal2VclDTMFDialedDigits
ZhoneAAL2-MIB ·
.1.3.6.1.4.1.5504.4.2.1.1.1.18
Object
column
r/w
Enumeration
DTMF Dialed Digits
Dialed Digits are multifrequency audio tones
typically used for inter-register signalling of
addresses during call set-up or for end-to-end
device control during an established call.
Depending on the system, codes are defined for
the digits 0-9 of a telephone keypad and other
auxiliary signals.
The service provided is the transfer of dialed
digits, namely, the transfer of five descriptors:
digit type, digit character, start time, end time,
and power level of the dual frequency pulse.
Valid values are enabled and disabled.
Context
- MIB
- ZhoneAAL2-MIB
- OID
.1.3.6.1.4.1.5504.4.2.1.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aal2VclEntry
- Table
- aal2VclTable
- Siblings
- 26
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmVccAal2AppId STR-VMOA-LES-01-00 4.1.1 Application Identifier (AppId)
The Application Identifier (AppId) specifies protocol
combinations used between IWFs.
The … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.1 |
| aal2VclNextCid The Channel Identifier is one of the indicies for
the CID table, aal2CidTable. The Application Identifier,
atmVccAal2AppId, determines the valid range of values for
the aal2Cid… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.10 |
| aal2VclTimerCU Value of the 'combined use' Timer_CU.
The combined use Timer_CU assures that CPS-Packets
with one or more octets already packed, wait at
most the duration of Timer_CU before b… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.11 |
| aal2VclAudioService The service provided is the transfer of audio
signals (voice, voiceband data, and facsimile).
The data unit traversing the SAP (SSCS SDU)
contains either a voice … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.12 |
| aal2VclCircuitModeData The service provided is the transfer of circuit
mode data. The circuit mode data service is an
emulation of the N*64 kbit/s (N = 1, 2, ..., 30)
unrestricted, 8 kHz structured ci… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.13 |
| aal2VclFrameModeData Frame mode data is an intermittent data stream
containing delimited units of information,
possibly of varying size, with idle intervals
between them.
The service… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.14 |
| aal2VclFaxDemoRemo Facsimile Demodulation/Remodulation is the
process of detecting facsimile traffic,
extracting digital information from the
incoming analogue modulated signal,
transporting thi… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.15 |
| aal2VclCAS Channel Associated Signalling Bits are bits
dedicated for connection control across a 1544
kbit/s or 2048 kbit/s interface that carries
64 kbit/s channels. Procedures are based … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.16 |
| aal2VclTrunkType Trunk type specifies the signaling method currently
used. Valid types are loop start,ground start and
loop reverse battery. The default value is loop start.
An instance of this ob… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.17 |
| aal2VclMfR1DialedDigits MF-R1 Dialed Digits.
See description for atmVccAal2DTMFDialedDigits.
Valid values are enabled and disabled. | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.19 |
| atmVccAal2VccI STR-VMOA-LES-01-00 4.1.2 VCC Identifier (VCCI)
To distinguish multiple VCCs, each shall be
assigned a VCCI. The creator of an SVC shall
assign its VCCI. The VCCI… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.2 |
| aal2VclMfR2DialedDigits MF-R2 Dialed Digits.
See description for atmVccAal2DTMFDialedDigits.
Valid values are enabled and disabled. | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.20 |
| aal2VclPCMEncoding Encoding Data Unit is an octet-aligned
concatenation of one or more frames of an
audio algorithm, entailing a specific format
of the bits. Every audio packet and SDU
contains… | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.21 |
| aal2VclMaxLengthFrame Maximum length for frame mode data.
Valid values are 1..65535. | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.22 |
| aal2VclMaxSDULength Max_SDU_Length indicates the maximum size
SSSAR-SDU, in octets, that is allowed to be
reassembled. Significance to peer-to-peer.
The maximum size of an SSSAR-SDU… | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.23 |
| aal2VclRasTimer The reassembly timer RAS_Timer assures that the
reassembly of an SSSAR-SDU does not exceed a
certain time; if such timer supervision is not
required, the timer is disabled by s… | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.24 |
| aal2VclCellsReceived Total cells received | column | cells SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.1.1.25 |
| aal2VclCellsSent Total cells sent | column | cells SNMPv2-SMIGauge32 | .1.3.6.1.4.1.5504.4.2.1.1.1.26 |
| aal2VclStatsTimeElapsed The number of seconds that have elapsed since
the beginning of the current collection
period. If, for some reason, such as an
adjustment in the system's time-of-day clock,
the … | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.27 |
| atmVccAal2SigVccI STR-VMOA-LES-01-00 4.1.3 Signaling VCC Identifier (SigVCCI)
If an AAL2 VCC is controlled by CCS, then
SigVCCI = VCCI is indicated. Conversely if
SigVCCI = VCCI t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.4.2.1.1.1.3 |
| aal2VclAudioProfileIdentifier The Audio Profile for this VCL entry is specified
by the Audio Profile identifier. The range of
valid Audio Profile identifiers is well-defined.
The Audio Profile identifier in… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.4 |
| aal2VclSscsDefaultType STR-VMOA-LES-01-00 4.1.4 SSCS Type
The SSCS type that applies to each channel of
an AAL2 VCC will vary according to the usage
of that channel. Channels that are … | column | Enumeration | .1.3.6.1.4.1.5504.4.2.1.1.1.5 |
| aal2VclMaxCpsSduSize Maximum length of a CPS-SDU (Max_CPS-SDU_Length).
Permitted values: 45 or 64 octets. | column | octets Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.6 |
| aal2VclMaxNumberMultiplexChannels Maximum number of multiplexed channels.
Peer-to-peer significance. Valid range
of values is 1..255. | column | channels Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.7 |
| aal2VclMinCidForAal2UserChannels Minimum CID value for AAL2 user channels.
Valid range is 1..255.
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
then the valid range for aal2VclMinCidForA… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.8 |
| aal2VclMaxCidForAal2UserChannels Maximum CID value for AAL2 user channels. Valid
range is 1..255. Maximum CID is 255.
If the field atmVccAal2AppId is set to casPotsOnlyNoElcp
then the valid range… | column | Integer32 | .1.3.6.1.4.1.5504.4.2.1.1.1.9 |