zxPwCTDMCfgPktReplacePolicy

ZXPW-TDM-MIB · .1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.12

Object

column r/w Enumeration

This parameter determines the value to be played when CE bound
packets have over/underflow the jitter buffer, or are missing
for any reason. This byte pattern is sent (played) on
the TDM line.

Context

MIB: ZXPW-TDM-MIB
OID: .1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.12
Type: column
Access: readwrite
Status: current
Parent: zxPwCTDMCfgEntry
Table: zxPwCTDMCfgTable
Siblings: 21

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	ais
`2`	implementationSpecific

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxPwCTDMCfgIndex Index to an entry in this table. The value is a copy of the assigned zxPwCTDMCfgIndexNext	column	PwTDMCfgIndex	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.1`
zxPwCTDMCfgConsecMissPktsOutSynch The number of consecutive missing packets that are required to enter the LOPS state.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.10`
zxPwCTDMCfgSetUp2SynchTimeOut The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the admins…	column	millisecond SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.11`
zxPwCTDMCfgAvePktLossTimeWindow The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate	column	millisecond SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.13`
zxPwCTDMCfgExcessivePktLossThreshold Excessive packet loss rate is detected by computing the average packetloss rate over a zxPwCTDMCfgAvePktLossTimeWindow amount of time and comparing it with this threshold value.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.14`
zxPwCTDMCfgAlarmThreshold Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.15`
zxPwCTDMCfgClearAlarmThreshold Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.16`
zxPwCTDMCfgMissingPktsToSes Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted.	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.17`
zxPwCTDMCfgTimestampMode Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming TDM attachment ci…	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.18`
zxPwCTDMCfgQueueSize The actual queue size is the 'zxPwCTDMCfgQueueSize' power of 2. The range of this object is from 1 to 10. But when resequencing, the maximum value is 7.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.19`
zxPwCTDMCfgRowStatus Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entry is in used and the status is active: zxPwCTDMCfg…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.2`
zxPwCTDMCfgName	column	OctetString	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.20`
zxPwCTDMCfgSSRC This object must be set when zxPwCTDMCfgRtpHdrUsed is 'TRUE'.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.21`
zxPwCTDMCfgStorageType This variable indicates the storage type for this row.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.22`
zxPwCTDMCfgConfErr Various configuration errors. Illegal settings within the zxPwCTDMCfg table.	column	Bits	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.3`
zxPwCTDMCfgPayloadSize The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon RX…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.4`
zxPwCTDMCfgPktReorder If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-sequen…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.5`
zxPwCTDMCfgRtpHdrUsed If set to False: an RTP header is not pre-pended to the TDM packet.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.6`
zxPwCTDMCfgJtrBfrDepth The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by th…	column	microsecond SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.7`
zxPwCTDMCfgPayloadSuppression Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disable' means: no suppresion under any condition.	column	Enumeration	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.8`
zxPwCTDMCfgConsecPktsInSynch The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.9`