zxPwCTDMCfgJtrBfrDepth

ZXPW-TDM-MIB · .1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.7
MIB view Table view

Object

column r/w microsecond SNMPv2-SMIUnsigned32 
The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific packet
delay variation.
              
If configured to a value not supported by the
implementation, the agent MUST return an error code
'jtrBfrDepth' in 'pwCTDMConfigError '
              
NOTE: jitter buffers are a limited resource to
be managed. The actual size should be at least twice as big
as the value of zxPwCTDMCfgJtrBfrDepth

Context

MIB
ZXPW-TDM-MIB
OID
.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.7
Type
column
Access
readwrite
Status
current
Units
microsecond
Parent
zxPwCTDMCfgEntry
Table
zxPwCTDMCfgTable
Siblings
21

Syntax

microsecond SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxPwCTDMCfgIndex
Index to an entry in this table. The value is a copy of the assigned zxPwCTDMCfgIndexNext
columnPwTDMCfgIndex.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.1
zxPwCTDMCfgConsecMissPktsOutSynch
The number of consecutive missing packets that are required to enter the LOPS state.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.10
zxPwCTDMCfgSetUp2SynchTimeOut
The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the admins…
columnmillisecond SNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.11
zxPwCTDMCfgPktReplacePolicy
This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for any reason. This byte pattern is sent (played) on …
columnEnumeration.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.12
zxPwCTDMCfgAvePktLossTimeWindow
The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate
columnmillisecond SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.13
zxPwCTDMCfgExcessivePktLossThreshold
Excessive packet loss rate is detected by computing the average packetloss rate over a zxPwCTDMCfgAvePktLossTimeWindow amount of time and comparing it with this threshold value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.14
zxPwCTDMCfgAlarmThreshold
Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.15
zxPwCTDMCfgClearAlarmThreshold
Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.16
zxPwCTDMCfgMissingPktsToSes
Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.17
zxPwCTDMCfgTimestampMode
Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming TDM attachment ci…
columnEnumeration.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.18
zxPwCTDMCfgQueueSize
The actual queue size is the 'zxPwCTDMCfgQueueSize' power of 2. The range of this object is from 1 to 10. But when resequencing, the maximum value is 7.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.19
zxPwCTDMCfgRowStatus
Object used for creating, modifying, and deleting a row from this table. The following objects should not be modified if the entry is in used and the status is active: zxPwCTDMCfg…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.2
zxPwCTDMCfgNamecolumnOctetString.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.20
zxPwCTDMCfgSSRC
This object must be set when zxPwCTDMCfgRtpHdrUsed is 'TRUE'.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.21
zxPwCTDMCfgStorageType
This variable indicates the storage type for this row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.22
zxPwCTDMCfgConfErr
Various configuration errors. Illegal settings within the zxPwCTDMCfg table.
columnBits.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.3
zxPwCTDMCfgPayloadSize
The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon RX…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.4
zxPwCTDMCfgPktReorder
If set True: as CE bound packets are queued in the jitter buffer, out of order packets are re-ordered. The maximum sequence number differential (i.e., the range in which re-sequen…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.5
zxPwCTDMCfgRtpHdrUsed
If set to False: an RTP header is not pre-pended to the TDM packet.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.6
zxPwCTDMCfgPayloadSuppression
Selecting 'enable' means: Payload suppression is allowed. Payload MAY be omitted in order to conserve bandwidth. Selecting 'disable' means: no suppresion under any condition.
columnEnumeration.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.8
zxPwCTDMCfgConsecPktsInSynch
The number of consecutive packets with sequential sequence numbers that are required to exit the LOPS state.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.3902.1015.1013.2.1.2.1.3.1.9