dot3ExtPkgOptIfOutputPower
ZXEPON-SERVICE-MIB ·
.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.7
Object
The optical power monitored at the output. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface.
Context
- MIB
- ZXEPON-SERVICE-MIB
- OID
.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.7- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.1 dbm
- Parent
- dot3ExtPkgOptIfEntry
- Table
- dot3ExtPkgOptIfTable
- Siblings
- 13
Syntax
0.1 dbm SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3ExtPkgOptIfSuspectedFlag This object is a reliability indication. If true, the data in this entry
may be unreliable. This object is applicable for an OLT and an ONU. At the
OLT it has a distinct value f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.1 |
| dot3ExtPkgOptIfLowerOutputPowerThreshold The lower limit threshold on output power. If ExtPkgOptIfOutputPower drops
to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading
will present the thre… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.10 |
| dot3ExtPkgOptIfUpperOutputPowerThreshold The upper limit threshold on output power. If ExtPkgOptIfOutputPower reaches
or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading
will present the thr… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.11 |
| dot3ExtPkgOptIfSignalDetect When getting true(1) there is a valid optical signal at the receive, that is above
the optical power level for signal detection. When getting false(2) the optical
signal at the … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.12 |
| dot3ExtPkgOptIfTransmitAlarm When getting true(1) there is a non-valid optical signal at the transmit of the
interface, either a higher level or lower level than expected. When getting false(2)
the optical … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.13 |
| dot3ExtPkgOptIfTransmitEnable Setting this object to true(1) will cause the optical interface to start transmission
(according to the control protocol specified for the logical interface). Setting this
objec… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.14 |
| dot3ExtPkgOptIfInputPower The optical power monitored at the input. This object is applicable for an OLT
and an ONU. At the OLT it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.2 |
| dot3ExtPkgOptIfLowInputPower The lowest optical power monitored at the input during the current 15-minute
interval. This object is applicable for an OLT and an ONU. At the OLT it has
a distinct value for ea… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.3 |
| dot3ExtPkgOptIfHighInputPower The highest optical power monitored at the input during the current 15-minute
interval. This object is applicable for an OLT and an ONU. At the OLT it has
a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.4 |
| dot3ExtPkgOptIfLowerInputPowerThreshold The lower limit threshold on input power. If ExtPkgOptIfInputPower drops
to this value or below, a Threshold Crossing Alert (TCA) should be sent.
Reading will present the thresh… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.5 |
| dot3ExtPkgOptIfUpperInputPowerThreshold The upper limit threshold on input power. If ExtPkgOptIfInputPower reaches
or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading
will present the thres… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.6 |
| dot3ExtPkgOptIfLowOutputPower The lowest optical power monitored at the output during the current 15-minute
interval. This object is applicable for an OLT and an ONU. At the OLT it has
a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.8 |
| dot3ExtPkgOptIfHighOutputPower The highest optical power monitored at the output during the current 15-minute
interval. This object is applicable for an OLT and an ONU. At the OLT it has
a distinct value for … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.9 |