dot3ExtPkgOptIfLowerInputPowerThreshold

Object

column r/w 0.1 dbm SNMPv2-SMIInteger32

The lower limit threshold on input power. If ExtPkgOptIfInputPower drops
to this value or below, a Threshold Crossing Alert (TCA) should be sent.
Reading will present the threshold value. Writing will set the value of the
threshold. The write operation is not restricted in this document and can be
done at any time. Changing ExtPkgOptIfLowerInputPowerThreshold can lead to
a Threshold Crossing Alert (TCA) being sent for the respective interface. This
alert may be leading to an interruption of service of the users connected to
the respective EPON interface, depending on the system action on such an alert.
This object is applicable for an OLT and an ONU. At the OLT it has a distinct
value for each virtual interface.

Context

MIB: ZXEPON-SERVICE-MIB
OID: .1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.5
Type: column
Access: readwrite
Status: current
Units: 0.1 dbm
Parent: dot3ExtPkgOptIfEntry
Table: dot3ExtPkgOptIfTable
Siblings: 13

Related Objects

Sibling Objects

Object	Type	Syntax	OID
dot3ExtPkgOptIfSuspectedFlag This object is a reliability indication. If true, the data in this entry may be unreliable. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value f…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.1`
dot3ExtPkgOptIfLowerOutputPowerThreshold The lower limit threshold on output power. If ExtPkgOptIfOutputPower drops to this value or below, a Threshold Crossing Alert (TCA) should be sent. Reading will present the thre…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.10`
dot3ExtPkgOptIfUpperOutputPowerThreshold The upper limit threshold on output power. If ExtPkgOptIfOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading will present the thr…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.11`
dot3ExtPkgOptIfSignalDetect When getting true(1) there is a valid optical signal at the receive, that is above the optical power level for signal detection. When getting false(2) the optical signal at the …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.12`
dot3ExtPkgOptIfTransmitAlarm When getting true(1) there is a non-valid optical signal at the transmit of the interface, either a higher level or lower level than expected. When getting false(2) the optical …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.13`
dot3ExtPkgOptIfTransmitEnable Setting this object to true(1) will cause the optical interface to start transmission (according to the control protocol specified for the logical interface). Setting this objec…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.14`
dot3ExtPkgOptIfInputPower The optical power monitored at the input. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface.	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.2`
dot3ExtPkgOptIfLowInputPower The lowest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for ea…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.3`
dot3ExtPkgOptIfHighInputPower The highest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for e…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.4`
dot3ExtPkgOptIfUpperInputPowerThreshold The upper limit threshold on input power. If ExtPkgOptIfInputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading will present the thres…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.6`
dot3ExtPkgOptIfOutputPower The optical power monitored at the output. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for each virtual interface.	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.7`
dot3ExtPkgOptIfLowOutputPower The lowest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for e…	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.8`
dot3ExtPkgOptIfHighOutputPower The highest optical power monitored at the output during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT it has a distinct value for …	column	0.1 dbm SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3902.1015.1010.1.5.1.5.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects