zxAnXdsl2LConfPsdMaskSelectUs

ZTE-AN-XDSL2-MIBII · .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9
MIB view Table view

Object

column r/w VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUs 
The selected upstream PSD mask.  This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
zxAnXdsl2LConfXtuTransSysEna.

Context

MIB
ZTE-AN-XDSL2-MIBII
OID
.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9
Type
column
Access
readwrite
Status
current
Parent
zxAnXdsl2ProfModeSpecEntry
Table
zxAnXdsl2ProfModeSpecTable
Siblings
12

Syntax

VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUs
Source
VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUs
Base type
Enumeration

Values & Constraints

Type Values
1adlu32Eu32
2adlu36Eu36
3adlu40Eu40
4adlu44Eu44
5adlu48Eu48
6adlu52Eu52
7adlu56Eu56
8adlu60Eu60
9adlu64Eu64

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnXdsl2LConfXdslMode
The DSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should be multiple entries i…
columnZxAnXdsl2OperationModes.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.1
zxAnXdsl2LConfClassMask
(CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask classes. Each class is de…
columnVDSL2-LINE-TC-MIBXdsl2LineClassMask.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.10
zxAnXdsl2LConfLimitMask
(LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of profiles.…
columnVDSL2-LINE-TC-MIBXdsl2LineLimitMask.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.11
zxAnXdsl2LConfUs0Disable
Enable or disable the use of US0.
columnVDSL2-LINE-TC-MIBXdsl2LineUs0Disable.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.12
zxAnXdsl2LConfMaxNomPsdDs
(MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values…
column0.1 dBm/Hz Integer32.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.2
zxAnXdsl2LConfMaxNomPsdUs
(MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values a…
column0.1 dBm/Hz Integer32.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3
zxAnXdsl2ProfModeSpecRowStatus
This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.30
zxAnXdsl2LConfMaxNomAtpDs
(MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical val…
column0.1 dBm Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.4
zxAnXdsl2LConfMaxNomAtpUs
(MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical value…
column0.1 dBm Unsigned32.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.5
zxAnXdsl2LConfMaxAggRxPwrUs
(MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximu…
column0.1 dBm Integer32.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.6
zxAnXdsl2LConfPsdMaskDs
(PSDMASKds). The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition t…
columnVDSL2-LINE-TC-MIBXdsl2PsdMaskDs.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.7
zxAnXdsl2LConfPsdMaskUs
(PSDMASKus). The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to …
columnVDSL2-LINE-TC-MIBXdsl2PsdMaskUs.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.8