zxAnXdsl2LConfMaxNomPsdUs
ZTE-AN-XDSL2-MIBII ·
.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3
Object
column
r/w
0.1 dBm/Hz Integer32
(MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz).
Context
- MIB
- ZTE-AN-XDSL2-MIBII
- OID
.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dBm/Hz
- Parent
- zxAnXdsl2ProfModeSpecEntry
- Table
- zxAnXdsl2ProfModeSpecTable
- Siblings
- 12
Syntax
0.1 dBm/Hz Integer32
Values & Constraints
Object Constraints
range: -600--300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnXdsl2LConfXdslMode The DSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares
the same PSD configuration.
There should be multiple entries i… | column | ZxAnXdsl2OperationModes | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.1 |
| zxAnXdsl2LConfClassMask (CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is de… | column | VDSL2-LINE-TC-MIBXdsl2LineClassMask | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.10 |
| zxAnXdsl2LConfLimitMask (LIMITMASK).
This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the
near-end xTU on this line for each class of profiles.… | column | VDSL2-LINE-TC-MIBXdsl2LineLimitMask | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.11 |
| zxAnXdsl2LConfUs0Disable Enable or disable the use of US0. | column | VDSL2-LINE-TC-MIBXdsl2LineUs0Disable | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.12 |
| zxAnXdsl2LConfMaxNomPsdDs (MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values… | column | 0.1 dBm/Hz Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.2 |
| zxAnXdsl2ProfModeSpecRowStatus This object is used to create a new row or to modify or
delete an existing row in this table.
A profile is activated by setting this object to 'active'.
When 'activ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.30 |
| zxAnXdsl2LConfMaxNomAtpDs (MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical val… | column | 0.1 dBm Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.4 |
| zxAnXdsl2LConfMaxNomAtpUs (MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical value… | column | 0.1 dBm Unsigned32 | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.5 |
| zxAnXdsl2LConfMaxAggRxPwrUs (MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximu… | column | 0.1 dBm Integer32 | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.6 |
| zxAnXdsl2LConfPsdMaskDs (PSDMASKds).
The downstream PSD mask applicable at the U-C2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition t… | column | VDSL2-LINE-TC-MIBXdsl2PsdMaskDs | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.7 |
| zxAnXdsl2LConfPsdMaskUs (PSDMASKus).
The upstream PSD mask applicable at the U-R2 reference
point.
This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to … | column | VDSL2-LINE-TC-MIBXdsl2PsdMaskUs | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.8 |
| zxAnXdsl2LConfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
zxAnXdsl2L… | column | VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUs | .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9 |