zxAnXdsl2LConfClassMask – ZTE-AN-XDSL2-MIBII

Object

column r/w VDSL2-LINE-TC-MIBXdsl2LineClassMask

(CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each
limit PSD mask of a specific class are equal in their
respective passband above 276 kHz.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfPrfXtuTransSysEna object. It selects a single
PSD mask class per Annex that is activated at the
VTU-O.

Context

MIB: ZTE-AN-XDSL2-MIBII
OID: .1.3.6.1.4.1.3902.1015.1001.1.3.19.1.10
Type: column
Access: readwrite
Status: current
Parent: zxAnXdsl2ProfModeSpecEntry
Table: zxAnXdsl2ProfModeSpecTable
Siblings: 12

Syntax

VDSL2-LINE-TC-MIBXdsl2LineClassMask

Source: VDSL2-LINE-TC-MIBXdsl2LineClassMask
Base type: Enumeration

Values & Constraints

Type Values

`1`	none
`2`	a998ORb997M1cORc998B
`3`	b997M1xOR998co
`4`	b997M2x
`5`	b998M1x
`6`	b998M2x
`7`	b998AdeM2x
`8`	bHpeM1

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxAnXdsl2LConfXdslMode The DSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should be multiple entries i…	column	ZxAnXdsl2OperationModes	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.1`
zxAnXdsl2LConfLimitMask (LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for each class of profiles.…	column	VDSL2-LINE-TC-MIBXdsl2LineLimitMask	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.11`
zxAnXdsl2LConfUs0Disable Enable or disable the use of US0.	column	VDSL2-LINE-TC-MIBXdsl2LineUs0Disable	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.12`
zxAnXdsl2LConfMaxNomPsdDs (MAXNOMPSDds). The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values…	column	0.1 dBm/Hz Integer32	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.2`
zxAnXdsl2LConfMaxNomPsdUs (MAXNOMPSDus). The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values a…	column	0.1 dBm/Hz Integer32	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.3`
zxAnXdsl2ProfModeSpecRowStatus This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When 'activ…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.30`
zxAnXdsl2LConfMaxNomAtpDs (MAXNOMATPds). The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical val…	column	0.1 dBm Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.4`
zxAnXdsl2LConfMaxNomAtpUs (MAXNOMATPus). The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical value…	column	0.1 dBm Unsigned32	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.5`
zxAnXdsl2LConfMaxAggRxPwrUs (MAXRXPWRus). The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this maximu…	column	0.1 dBm Integer32	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.6`
zxAnXdsl2LConfPsdMaskDs (PSDMASKds). The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition t…	column	VDSL2-LINE-TC-MIBXdsl2PsdMaskDs	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.7`
zxAnXdsl2LConfPsdMaskUs (PSDMASKus). The upstream PSD mask applicable at the U-R2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to …	column	VDSL2-LINE-TC-MIBXdsl2PsdMaskUs	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.8`
zxAnXdsl2LConfPsdMaskSelectUs The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled bits in zxAnXdsl2L…	column	VDSL2-LINE-TC-MIBXdsl2LinePsdMaskSelectUs	`.1.3.6.1.4.1.3902.1015.1001.1.3.19.1.9`