zxAnLdpMplsLdpRouterId

ZTE-AN-LDP-MIB · .1.3.6.1.4.1.3902.1015.55.1.4

Object

scalar r/w SNMPv2-SMIInteger32

A zxAnL3IfIndex is used as the LDP router ID. It is recommended
to use loopback interface as LDP router ID. L3 VLAN interface
also can be configed. IP address of zxAnL3IfIndex should be
configured before the zxAnL3IfIndex configured as the router ID.

Context

MIB: ZTE-AN-LDP-MIB
OID: .1.3.6.1.4.1.3902.1015.55.1.4
Type: scalar
Access: readwrite
Status: current
Parent: zxAnLdpGlobalObjects
Siblings: 23

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zxAnLdpMplsEnable Enable MPLS service.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.1`
zxAnLdpMplsSessMaxBackoffTime The maximum time which LDP entity could use to rebuild session after LDP failed to establish a session. The waiting time starts from the initial back off time, then increases expo…	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.10`
zxAnLdpMplsSessKeepAliveTime The timer which is the proposed keep alive hold timer for LDP session.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.11`
zxAnLdpMplsGrEnable LDP GR(Graceful Restart) function enable switch. It indicates whether LDP GR function should be enabled.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.12`
zxAnLdpMplsGrRecoveryTime The maximum time which is the proposed GR recovery timer for this LDP entity. After LDP session rebuilt, GR Helper assists GR Restarter to update label forwarding table.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.13`
zxAnLdpMplsGrNeighKeepAliveTime The maximum time which is the proposed keep alive neighbor when a LDP entity found the peer is down.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.14`
zxAnLdpMplsVpnGrEnable MPLS Layer 2 VPN GR function enable switch.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.15`
zxAnLdpMplsHelloHoldTime The timer which is the proposed Hello hold timer for this LDP entity. A value of 65535 means infinite.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.16`
zxAnLdpMplsHelloSendInterval The time interval to send Hello message for this LDP entity. The time must be smaller than the hello hold time.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.17`
zxAnLdpMplsTgtHelloHoldTime The timer which is the proposed targeted Hello hold timer for this LDP entity. A value of 65535 means infinite.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.18`
zxAnLdpMplsTgtHelloSendInterval The time interval to send targeted Hello message for this LDP entity. The time must be smaller than the targeted hello hold time.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.19`
zxAnLdpMplsMinLabel Minimum value in dynamic label range of MPLS. For OLT C300, the label value range from 16 to 1044478.	scalar	Integer32	`.1.3.6.1.4.1.3902.1015.55.1.2`
zxAnLdpMplsKeepSessWithHelloMsg LDP session keeping alive with hello messages enable switch. If the switch is enabling, the LDP session reset keep alive timer when receiving a hello message.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.20`
zxAnLdpMplsGrHelperEnable Graceful restart helper enable switch.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.21`
zxAnLdpMplsLabelControlMode To specify control mode of LSP.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.22`
zxAnLdpMplsLabelRetentionMode To specify retention mode of LSP.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.23`
zxAnLdpMplsPktWithLabelEnable To specify label encapsulation mode when LSR sending protocol packets.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.24`
zxAnLdpMplsMaxLabel Maximum value in dynamic label range of MPLS. For OLT C300, the label value range from 16 to 1044478, and the default maximum value is 1044478.	scalar	Integer32	`.1.3.6.1.4.1.3902.1015.55.1.3`
zxAnLdpMplsLdpRouterIdForce zxAnLdpMplsLdpRouterId is valid immediately. When force is set whether the router ID designated takes effect depends on the current status of the designated interface. When cur…	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.5`
zxAnLdpMplsExplicitNullEnable MPLS explicit null label enable switch.	scalar	Enumeration	`.1.3.6.1.4.1.3902.1015.55.1.6`
zxAnLdpMplsMinInUseLabel Minimum value in dynamic label range of MPLS in use. For OLT C300, the label value ranges from 16 to 1044478.	scalar	Integer32	`.1.3.6.1.4.1.3902.1015.55.1.7`
zxAnLdpMplsMaxInUseLabel Maximum value in dynamic label range of MPLS in use. For OLT C300, the label value ranges from 16 to 1044478.	scalar	Integer32	`.1.3.6.1.4.1.3902.1015.55.1.8`
zxAnLdpMplsSessInitBackoffTime The initial time which LDP entity should wait and try again after LDP failed to establish a session.	scalar	seconds Integer32	`.1.3.6.1.4.1.3902.1015.55.1.9`