subVoiceVoipPLAR

ZHONE-GEN-SUBSCRIBER · .1.3.6.1.4.1.5504.3.4.1.13.1.11
MIB view Table view

Object

column SNMPv2-TCTruthValue 
Is this subscriber PLAR (private line automatic ringdown) subscriber. 
If true we immediately send a INVITE instead of play dialtone, collect digits

Context

MIB
ZHONE-GEN-SUBSCRIBER
OID
.1.3.6.1.4.1.5504.3.4.1.13.1.11
Type
column
Access
readonly
Status
current
Parent
subVoiceVoipEntry
Table
subVoiceVoipTable
Siblings
17

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
subVoiceVoipEndPointIndex
The index into this table containing either SIP or MGCP end point information. This index is equal to the index defined for either the SIP or MGCP endpoint in the subVoiceConnec…
columnInteger32.1.3.6.1.4.1.5504.3.4.1.13.1.1
subVoiceVoipPassword
Authentication string needed for call originations through a SIP/MGCP Server. The SIP/MGCP URI acts as the username.
columnZhone-TCZhoneAdminString.1.3.6.1.4.1.5504.3.4.1.13.1.10
subVoiceVoipPlarDestIpAddrType
This object specifies the type of address contained in the associated instance of subVoiceVoipPlarDestIpAddr.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.3.4.1.13.1.12
subVoiceVoipPlarDestIpAddr
The destination IP address to send INVITE to in case the subscriber is PLAR
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.3.4.1.13.1.13
subVoiceVoipPlarUdpPort
Specifies the UDP Port number for the VOIP Setup messages. 5060 is the IANA Registered SIP port.
columnInteger32.1.3.6.1.4.1.5504.3.4.1.13.1.14
subVoiceVoipRegistrationServer
Voip Registration Server Address. A number between 1 and 255 which identifies the Voip Server that is responsible for this particular end point. If this value is not 0, a voip-se…
columnUnsigned32.1.3.6.1.4.1.5504.3.4.1.13.1.15
subVoiceVoipT38Fax
Defines t38 fax protocol used for this subscriber
columnT38FaxType.1.3.6.1.4.1.5504.3.4.1.13.1.16
subVoiceVoipAuthUsername
Authorization username used for calculating the credentials, when we receive 401/407 response. This field is optional, if not configured, then it's value is same as username field
columncharacters Zhone-TCZhoneAdminString.1.3.6.1.4.1.5504.3.4.1.13.1.17
subVoiceVoipHotlineDN
The directory number to auto dial when hotline or warmline feature is activated for the subscriber.
columnZhone-TCZhoneAdminString.1.3.6.1.4.1.5504.3.4.1.13.1.18
subVoiceHotlineInitialTimer
Specifies the timer in seconds to wait before dialing hotline DN when hotline or warmline feature is enabled.
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.3.4.1.13.1.19
subVoiceVoipUserName
A unique string that identifies the user in the system. If this string is not unique, error of inconsisten value is returned.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.5504.3.4.1.13.1.2
subVoiceVoipDirectoryNumber
The directory number, e.g., phone number, assigned to this endpoint. Contains only digits. This number must be unique across subscriber-voice-voip in the system If not, error of…
columnZhone-TCZhoneAdminString.1.3.6.1.4.1.5504.3.4.1.13.1.3
subVoiceVoipIpInterface
Interface Index of the LP Interface through which the SIP signalling and RTP traffic will flow.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.3.4.1.13.1.4
subVoiceVoipPreferredCodec
Defines the preferred voice codec to be used for this subscriber.
columnZhoneCodecType.1.3.6.1.4.1.5504.3.4.1.13.1.5
subVoiceVoipG711Fallback
Indicates whether a subscriber may consume bandwidth by switching to g711, when a fax, modem, b-channel data session is detected.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.3.4.1.13.1.6
subVoiceVoipFramesPerPacket
Indicates the number of voice frames per IP packet.
columnInteger32.1.3.6.1.4.1.5504.3.4.1.13.1.8
subVoiceVoipG726ByteOrder
Indicates the byte order to be used when g.726 voice coding is in use. Cisco uses little endian byte order, whereas the g.726 standard calls for big endian byte order.
columnEnumeration.1.3.6.1.4.1.5504.3.4.1.13.1.9