subVoiceVoipDirectoryNumber
ZHONE-GEN-SUBSCRIBER ·
.1.3.6.1.4.1.5504.3.4.1.13.1.3
Object
The directory number, e.g., phone number, assigned to this endpoint. Contains only digits. This number must be unique across subscriber-voice-voip in the system If not, error of inconsistent value is returned.
Context
- MIB
- ZHONE-GEN-SUBSCRIBER
- OID
.1.3.6.1.4.1.5504.3.4.1.13.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- subVoiceVoipEntry
- Table
- subVoiceVoipTable
- Siblings
- 17
Values & Constraints
Type Constraints
range: 0..32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| subVoiceVoipEndPointIndex The index into this table containing either SIP or MGCP end
point information. This index is equal to the index
defined for either the SIP or MGCP endpoint in the
subVoiceConnec… | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.13.1.1 |
| subVoiceVoipPassword Authentication string needed for call originations through a SIP/MGCP Server.
The SIP/MGCP URI acts as the username. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.4.1.13.1.10 |
| subVoiceVoipPLAR Is this subscriber PLAR (private line automatic ringdown) subscriber.
If true we immediately send a INVITE instead of play dialtone, collect digits | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.4.1.13.1.11 |
| subVoiceVoipPlarDestIpAddrType This object specifies the type of address contained
in the associated instance of subVoiceVoipPlarDestIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5504.3.4.1.13.1.12 |
| subVoiceVoipPlarDestIpAddr The destination IP address to send INVITE to in case the subscriber is PLAR | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5504.3.4.1.13.1.13 |
| subVoiceVoipPlarUdpPort Specifies the UDP Port number for the VOIP Setup messages.
5060 is the IANA Registered SIP port. | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.13.1.14 |
| subVoiceVoipRegistrationServer Voip Registration Server Address. A number between 1 and 255
which identifies the Voip Server that is responsible for this
particular end point.
If this value is not 0, a voip-se… | column | Unsigned32 | .1.3.6.1.4.1.5504.3.4.1.13.1.15 |
| subVoiceVoipT38Fax Defines t38 fax protocol used for this subscriber | column | T38FaxType | .1.3.6.1.4.1.5504.3.4.1.13.1.16 |
| subVoiceVoipAuthUsername Authorization username used for calculating the credentials,
when we receive 401/407 response. This field is optional,
if not configured, then it's value is same as username field | column | characters Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.4.1.13.1.17 |
| subVoiceVoipHotlineDN The directory number to auto dial when hotline or warmline feature is
activated for the subscriber. | column | Zhone-TCZhoneAdminString | .1.3.6.1.4.1.5504.3.4.1.13.1.18 |
| subVoiceHotlineInitialTimer Specifies the timer in seconds to wait before dialing hotline DN
when hotline or warmline feature is enabled. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.3.4.1.13.1.19 |
| subVoiceVoipUserName A unique string that identifies the user in the system.
If this string is not unique, error of inconsisten value
is returned. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.3.4.1.13.1.2 |
| subVoiceVoipIpInterface Interface Index of the LP Interface through which
the SIP signalling and RTP traffic will flow. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.3.4.1.13.1.4 |
| subVoiceVoipPreferredCodec Defines the preferred voice codec to be used for this
subscriber. | column | ZhoneCodecType | .1.3.6.1.4.1.5504.3.4.1.13.1.5 |
| subVoiceVoipG711Fallback Indicates whether a subscriber may consume bandwidth by
switching to g711, when a fax, modem, b-channel data
session is detected. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.3.4.1.13.1.6 |
| subVoiceVoipFramesPerPacket Indicates the number of voice frames per IP packet. | column | Integer32 | .1.3.6.1.4.1.5504.3.4.1.13.1.8 |
| subVoiceVoipG726ByteOrder Indicates the byte order to be used when g.726 voice
coding is in use. Cisco uses little endian byte order,
whereas the g.726 standard calls for big endian byte order. | column | Enumeration | .1.3.6.1.4.1.5504.3.4.1.13.1.9 |