subVoiceVoipAuthUsername

ZHONE-GEN-SUBSCRIBER · .1.3.6.1.4.1.5504.3.4.1.13.1.17

MIB view Table view

Object

column r/w characters Zhone-TCZhoneAdminString

Authorization username used for calculating the credentials,
when we receive 401/407 response. This field is optional, 
if not configured, then it's value is same as username field

Context

MIB: ZHONE-GEN-SUBSCRIBER
OID: .1.3.6.1.4.1.5504.3.4.1.13.1.17
Type: column
Access: readwrite
Status: current
Units: characters
Parent: subVoiceVoipEntry
Table: subVoiceVoipTable
Siblings: 17

Syntax

characters Zhone-TCZhoneAdminString

Source: Zhone-TCZhoneAdminString
Base type: OctetString

Values & Constraints

Type Constraints

range: 0..32

Related Objects

Sibling Objects

Object	Type	Syntax	OID
subVoiceVoipEndPointIndex The index into this table containing either SIP or MGCP end point information. This index is equal to the index defined for either the SIP or MGCP endpoint in the subVoiceConnec…	column	Integer32	`.1.3.6.1.4.1.5504.3.4.1.13.1.1`
subVoiceVoipPassword Authentication string needed for call originations through a SIP/MGCP Server. The SIP/MGCP URI acts as the username.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.4.1.13.1.10`
subVoiceVoipPLAR Is this subscriber PLAR (private line automatic ringdown) subscriber. If true we immediately send a INVITE instead of play dialtone, collect digits	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.3.4.1.13.1.11`
subVoiceVoipPlarDestIpAddrType This object specifies the type of address contained in the associated instance of subVoiceVoipPlarDestIpAddr.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.5504.3.4.1.13.1.12`
subVoiceVoipPlarDestIpAddr The destination IP address to send INVITE to in case the subscriber is PLAR	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.5504.3.4.1.13.1.13`
subVoiceVoipPlarUdpPort Specifies the UDP Port number for the VOIP Setup messages. 5060 is the IANA Registered SIP port.	column	Integer32	`.1.3.6.1.4.1.5504.3.4.1.13.1.14`
subVoiceVoipRegistrationServer Voip Registration Server Address. A number between 1 and 255 which identifies the Voip Server that is responsible for this particular end point. If this value is not 0, a voip-se…	column	Unsigned32	`.1.3.6.1.4.1.5504.3.4.1.13.1.15`
subVoiceVoipT38Fax Defines t38 fax protocol used for this subscriber	column	T38FaxType	`.1.3.6.1.4.1.5504.3.4.1.13.1.16`
subVoiceVoipHotlineDN The directory number to auto dial when hotline or warmline feature is activated for the subscriber.	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.4.1.13.1.18`
subVoiceHotlineInitialTimer Specifies the timer in seconds to wait before dialing hotline DN when hotline or warmline feature is enabled.	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.3.4.1.13.1.19`
subVoiceVoipUserName A unique string that identifies the user in the system. If this string is not unique, error of inconsisten value is returned.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.5504.3.4.1.13.1.2`
subVoiceVoipDirectoryNumber The directory number, e.g., phone number, assigned to this endpoint. Contains only digits. This number must be unique across subscriber-voice-voip in the system If not, error of…	column	Zhone-TCZhoneAdminString	`.1.3.6.1.4.1.5504.3.4.1.13.1.3`
subVoiceVoipIpInterface Interface Index of the LP Interface through which the SIP signalling and RTP traffic will flow.	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.5504.3.4.1.13.1.4`
subVoiceVoipPreferredCodec Defines the preferred voice codec to be used for this subscriber.	column	ZhoneCodecType	`.1.3.6.1.4.1.5504.3.4.1.13.1.5`
subVoiceVoipG711Fallback Indicates whether a subscriber may consume bandwidth by switching to g711, when a fax, modem, b-channel data session is detected.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.3.4.1.13.1.6`
subVoiceVoipFramesPerPacket Indicates the number of voice frames per IP packet.	column	Integer32	`.1.3.6.1.4.1.5504.3.4.1.13.1.8`
subVoiceVoipG726ByteOrder Indicates the byte order to be used when g.726 voice coding is in use. Cisco uses little endian byte order, whereas the g.726 standard calls for big endian byte order.	column	Enumeration	`.1.3.6.1.4.1.5504.3.4.1.13.1.9`