zhoneTraceRouteCtlMaxFailures

ZHONE-DISMAN-TRACEROUTE-MIB · .1.3.6.1.4.1.5504.4.1.20.1.3.1.15
MIB view Table view

Object

column r/w timeouts Unsigned32 
The value of this object indicates the maximum number
of consecutive timeouts allowed before terminating
a remote traceroute request.  A value of either 255 (maximum
hop count/possible TTL value) or a 0 indicates that the
function of terminating a remote traceroute request when a
specific number of successive timeouts are detected is
disabled.

Context

MIB
ZHONE-DISMAN-TRACEROUTE-MIB
OID
.1.3.6.1.4.1.5504.4.1.20.1.3.1.15
Type
column
Access
readwrite
Status
current
Units
timeouts
Parent
zhoneTraceRouteCtlEntry
Table
zhoneTraceRouteCtlTable
Siblings
25

Syntax

timeouts Unsigned32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zhoneTraceRouteCtlIndex
When used in conjunction with such a security policy all entries in the table belonging to a particular user (or group) will have the same value for this initial index. For a giv…
columnInteger32.1.3.6.1.4.1.5504.4.1.20.1.3.1.1
zhoneTraceRouteCtlDSField
Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (…
columnUnsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.10
zhoneTraceRouteCtlSourceAddressType
Specifies the type of the source address, zhoneTraceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.4.1.20.1.3.1.11
zhoneTraceRouteCtlSourceAddress
Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this op…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.4.1.20.1.3.1.12
zhoneTraceRouteCtlIfIndex
Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A valu…
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.5504.4.1.20.1.3.1.13
zhoneTraceRouteCtlMiscOptions
Enables an application to specify implementation dependent options.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.5504.4.1.20.1.3.1.14
zhoneTraceRouteCtlDontFragment
This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.1.20.1.3.1.16
zhoneTraceRouteCtlInitialTtl
The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.
columnUnsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.17
zhoneTraceRouteCtlFrequency
The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in a si…
columnseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.18
zhoneTraceRouteCtlStorageType
The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.5504.4.1.20.1.3.1.19
zhoneTraceRouteCtlTargetAddressType
Specifies the type of host address to be used on the traceroute request at the remote host.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.5504.4.1.20.1.3.1.2
zhoneTraceRouteCtlAdminStatus
Reflects the desired state that an zhoneTraceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this zhoneTrac…
columnEnumeration.1.3.6.1.4.1.5504.4.1.20.1.3.1.20
zhoneTraceRouteCtlDescr
The purpose of this object is to provide a descriptive name of the remote traceroute test.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.5504.4.1.20.1.3.1.21
zhoneTraceRouteCtlMaxRows
None
columnrows SNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.22
zhoneTraceRouteCtlTrapGeneration
The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a zhoneTraceRoutePathChange notification when the cu…
columnBits.1.3.6.1.4.1.5504.4.1.20.1.3.1.23
zhoneTraceRouteCtlCreateHopsEntries
The current path for a traceroute test is kept in the zhoneTraceRouteHopsTable on a per hop basis when the value of this object is true(1).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.1.20.1.3.1.24
zhoneTraceRouteCtlType
The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected fr…
columnObjectIdentifier.1.3.6.1.4.1.5504.4.1.20.1.3.1.25
zhoneTraceRouteCtlRowStatus
This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same zhoneTraceRouteCtlOwnerIndex…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.5504.4.1.20.1.3.1.26
zhoneTraceRouteCtlTargetAddress
Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding zhoneTraceRo…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.5504.4.1.20.1.3.1.3
zhoneTraceRouteCtlByPassRouteTable
The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.4.1.20.1.3.1.4
zhoneTraceRouteCtlDataSize
Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtract…
columnoctets Unsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.5
zhoneTraceRouteCtlTimeOut
Specifies the time-out value, in seconds, for a traceroute request.
columnseconds Unsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.6
zhoneTraceRouteCtlProbesPerHop
Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.
columnprobes Unsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.7
zhoneTraceRouteCtlPort
Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IA…
columnUDP Port Unsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.8
zhoneTraceRouteCtlMaxTtl
Specifies the maximum time-to-live value.
columntime-to-live value Unsigned32.1.3.6.1.4.1.5504.4.1.20.1.3.1.9