zhoneTraceRouteCtlAdminStatus
ZHONE-DISMAN-TRACEROUTE-MIB ·
.1.3.6.1.4.1.5504.4.1.20.1.3.1.20
Object
column
r/w
Enumeration
Reflects the desired state that an zhoneTraceRouteCtlEntry
should be in:
enabled(1) - Attempt to activate the test as defined by
this zhoneTraceRouteCtlEntry.
disabled(2) - Deactivate the test as defined by this
zhoneTraceRouteCtlEntry.
Refer to the corresponding zhoneTraceRouteResultsOperStatus to
determine the operational state of the test defined by
this entry.
Context
- MIB
- ZHONE-DISMAN-TRACEROUTE-MIB
- OID
.1.3.6.1.4.1.5504.4.1.20.1.3.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhoneTraceRouteCtlEntry
- Table
- zhoneTraceRouteCtlTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zhoneTraceRouteCtlIndex When used in conjunction with such a security policy
all entries in the table belonging to a particular user
(or group) will have the same value for this initial
index. For a giv… | column | Integer32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.1 |
| zhoneTraceRouteCtlDSField Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the traceroute probe. The DS Field is
defined as the Type of Service (… | column | Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.10 |
| zhoneTraceRouteCtlSourceAddressType Specifies the type of the source address,
zhoneTraceRouteCtlSourceAddress, to be used at a remote host
when performing a traceroute operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5504.4.1.20.1.3.1.11 |
| zhoneTraceRouteCtlSourceAddress Use the specified IP address (which must be given
as an IP number, not a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this op… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5504.4.1.20.1.3.1.12 |
| zhoneTraceRouteCtlIfIndex Setting this object to an interface's ifIndex prior
to starting a remote traceroute operation directs
the traceroute probes to be transmitted over the
specified interface. A valu… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.5504.4.1.20.1.3.1.13 |
| zhoneTraceRouteCtlMiscOptions Enables an application to specify implementation
dependent options. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.4.1.20.1.3.1.14 |
| zhoneTraceRouteCtlMaxFailures The value of this object indicates the maximum number
of consecutive timeouts allowed before terminating
a remote traceroute request. A value of either 255 (maximum
hop count/pos… | column | timeouts Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.15 |
| zhoneTraceRouteCtlDontFragment This object enables setting of the don't fragment flag (DF)
in the IP header for a probe. Use of this object enables
performing a manual PATH MTU test. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.20.1.3.1.16 |
| zhoneTraceRouteCtlInitialTtl The value of this object specifies the initial TTL value to
use. This enables bypassing the initial (often well known)
portion of a path. | column | Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.17 |
| zhoneTraceRouteCtlFrequency The number of seconds to wait before repeating a
traceroute test as defined by the value of the
various objects in the corresponding row.
The number of hops in a si… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.18 |
| zhoneTraceRouteCtlStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.5504.4.1.20.1.3.1.19 |
| zhoneTraceRouteCtlTargetAddressType Specifies the type of host address to be used on the
traceroute request at the remote host. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.5504.4.1.20.1.3.1.2 |
| zhoneTraceRouteCtlDescr The purpose of this object is to provide a
descriptive name of the remote traceroute
test. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.4.1.20.1.3.1.21 |
| zhoneTraceRouteCtlMaxRows None | column | rows SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.22 |
| zhoneTraceRouteCtlTrapGeneration The value of this object determines when and if to
to generate a notification for this entry:
pathChange(0) - Generate a zhoneTraceRoutePathChange
notification when the cu… | column | Bits | .1.3.6.1.4.1.5504.4.1.20.1.3.1.23 |
| zhoneTraceRouteCtlCreateHopsEntries The current path for a traceroute test is kept in the
zhoneTraceRouteHopsTable on a per hop basis when the value of
this object is true(1). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.20.1.3.1.24 |
| zhoneTraceRouteCtlType The value of this object is used either to report or
select the implementation method to be used for
performing a traceroute operation. The value of this
object may be selected fr… | column | ObjectIdentifier | .1.3.6.1.4.1.5504.4.1.20.1.3.1.25 |
| zhoneTraceRouteCtlRowStatus This object allows entries to be created and deleted
in the traceRouteCtlTable. Deletion of an entry in
this table results in all corresponding (same
zhoneTraceRouteCtlOwnerIndex… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.5504.4.1.20.1.3.1.26 |
| zhoneTraceRouteCtlTargetAddress Specifies the host address used on the
traceroute request at the remote host. The
host address type can be determined by the
examining the value of the corresponding
zhoneTraceRo… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.5504.4.1.20.1.3.1.3 |
| zhoneTraceRouteCtlByPassRouteTable The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.4.1.20.1.3.1.4 |
| zhoneTraceRouteCtlDataSize Specifies the size of the data portion of a traceroute
request in octets. A traceroute request is essentially
transmitted by encoding a UDP datagram into a
IP packet. So subtract… | column | octets Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.5 |
| zhoneTraceRouteCtlTimeOut Specifies the time-out value, in seconds, for
a traceroute request. | column | seconds Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.6 |
| zhoneTraceRouteCtlProbesPerHop Specifies the number of times to reissue a traceroute
request with the same time-to-live (TTL) value. | column | probes Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.7 |
| zhoneTraceRouteCtlPort Specifies the UDP port to send the traceroute
request to. Need to specify a port that is not in
use at the destination (target) host. The default
value for this object is the IA… | column | UDP Port Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.8 |
| zhoneTraceRouteCtlMaxTtl Specifies the maximum time-to-live value. | column | time-to-live value Unsigned32 | .1.3.6.1.4.1.5504.4.1.20.1.3.1.9 |