zhoneTraceRouteCtlIndex

ZHONE-DISMAN-TRACEROUTE-MIB · .1.3.6.1.4.1.5504.4.1.20.1.3.1.1

Object

column Integer32

When used in conjunction with such a security policy
all entries in the table belonging to a particular user
(or group) will have the same value for this initial
index.  For a given user's entries in a particular
table, the object identifiers for the information in
these entries will have the same subidentifiers (except
for the 'column' subidentifier) up to the end of the
encoded owner index.

Context

MIB: ZHONE-DISMAN-TRACEROUTE-MIB
OID: .1.3.6.1.4.1.5504.4.1.20.1.3.1.1
Type: column
Access: readonly
Status: current
Parent: zhoneTraceRouteCtlEntry
Table: zhoneTraceRouteCtlTable
Siblings: 25

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
zhoneTraceRouteCtlDSField Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the traceroute probe. The DS Field is defined as the Type of Service (…	column	Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.10`
zhoneTraceRouteCtlSourceAddressType Specifies the type of the source address, zhoneTraceRouteCtlSourceAddress, to be used at a remote host when performing a traceroute operation.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.11`
zhoneTraceRouteCtlSourceAddress Use the specified IP address (which must be given as an IP number, not a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this op…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.12`
zhoneTraceRouteCtlIfIndex Setting this object to an interface's ifIndex prior to starting a remote traceroute operation directs the traceroute probes to be transmitted over the specified interface. A valu…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.13`
zhoneTraceRouteCtlMiscOptions Enables an application to specify implementation dependent options.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.14`
zhoneTraceRouteCtlMaxFailures The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute request. A value of either 255 (maximum hop count/pos…	column	timeouts Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.15`
zhoneTraceRouteCtlDontFragment This object enables setting of the don't fragment flag (DF) in the IP header for a probe. Use of this object enables performing a manual PATH MTU test.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.16`
zhoneTraceRouteCtlInitialTtl The value of this object specifies the initial TTL value to use. This enables bypassing the initial (often well known) portion of a path.	column	Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.17`
zhoneTraceRouteCtlFrequency The number of seconds to wait before repeating a traceroute test as defined by the value of the various objects in the corresponding row. The number of hops in a si…	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.18`
zhoneTraceRouteCtlStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.19`
zhoneTraceRouteCtlTargetAddressType Specifies the type of host address to be used on the traceroute request at the remote host.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.2`
zhoneTraceRouteCtlAdminStatus Reflects the desired state that an zhoneTraceRouteCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this zhoneTrac…	column	Enumeration	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.20`
zhoneTraceRouteCtlDescr The purpose of this object is to provide a descriptive name of the remote traceroute test.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.21`
zhoneTraceRouteCtlMaxRows None	column	rows SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.22`
zhoneTraceRouteCtlTrapGeneration The value of this object determines when and if to to generate a notification for this entry: pathChange(0) - Generate a zhoneTraceRoutePathChange notification when the cu…	column	Bits	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.23`
zhoneTraceRouteCtlCreateHopsEntries The current path for a traceroute test is kept in the zhoneTraceRouteHopsTable on a per hop basis when the value of this object is true(1).	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.24`
zhoneTraceRouteCtlType The value of this object is used either to report or select the implementation method to be used for performing a traceroute operation. The value of this object may be selected fr…	column	ObjectIdentifier	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.25`
zhoneTraceRouteCtlRowStatus This object allows entries to be created and deleted in the traceRouteCtlTable. Deletion of an entry in this table results in all corresponding (same zhoneTraceRouteCtlOwnerIndex…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.26`
zhoneTraceRouteCtlTargetAddress Specifies the host address used on the traceroute request at the remote host. The host address type can be determined by the examining the value of the corresponding zhoneTraceRo…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.3`
zhoneTraceRouteCtlByPassRouteTable The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.4`
zhoneTraceRouteCtlDataSize Specifies the size of the data portion of a traceroute request in octets. A traceroute request is essentially transmitted by encoding a UDP datagram into a IP packet. So subtract…	column	octets Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.5`
zhoneTraceRouteCtlTimeOut Specifies the time-out value, in seconds, for a traceroute request.	column	seconds Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.6`
zhoneTraceRouteCtlProbesPerHop Specifies the number of times to reissue a traceroute request with the same time-to-live (TTL) value.	column	probes Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.7`
zhoneTraceRouteCtlPort Specifies the UDP port to send the traceroute request to. Need to specify a port that is not in use at the destination (target) host. The default value for this object is the IA…	column	UDP Port Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.8`
zhoneTraceRouteCtlMaxTtl Specifies the maximum time-to-live value.	column	time-to-live value Unsigned32	`.1.3.6.1.4.1.5504.4.1.20.1.3.1.9`