failoverTimer
ZHNSYSTEM ·
.1.3.6.1.4.1.5504.2.5.2.1.16.1
Object
The WAN Failover Timer is used to determine how long (in seconds) the Fiber uplink interface must be operationally DOWN before a USB Cellular WAN Backup connection will be initiated. The Default value is 0 seconds, which DISABLES this feature. The recommended value to enable this feature is 60 seconds.
Context
- MIB
- ZHNSYSTEM
- OID
.1.3.6.1.4.1.5504.2.5.2.1.16.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- zhnSystemWanBackupObjects
- Siblings
- 15
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| connectionTimeout Specifies the duration of inactivity in seconds before the cellular data
call will automatically terminate. A new call will be initiated automatically
when a packet must be sent … | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.2.1.16.10 |
| backupIpAddressMode The WAN IP Address, Default Gateway IP Address, Subnet Mask and DNS Server
IP Address must all be defined for the USB Cellular Backup connection. When
IP Address Mode is set to D… | scalar | BasicAddressingTypeValues | .1.3.6.1.4.1.5504.2.5.2.1.16.11 |
| backupIpAddress The IP Address to be used on the WAN uplink interface of a Cellular Backhaul
connection. This parameter is acquired dynamically in DHCP mode and only
configurable if the BackupIp… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.2.1.16.12 |
| backupDefaultGateway The IP Address of the Default Gateway to be used on the WAN uplink interface
of a Cellular Backhaul connection. This parameter is acquired dynamically in
DHCP mode and only con… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.2.1.16.13 |
| backupSubnetMask The Subnet Mask to be used on the WAN uplink interface of a Cellular Backhaul
connection. This parameter is acquired dynamically in DHCP mode and only
configurable if the BackupI… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.2.1.16.14 |
| backupPrimaryDns The IP Address of the Primary DNS Server to be used on the WAN uplink interface
of a Cellular Backhaul connection. This parameter is acquired dynamically in
DHCP mode and only … | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.2.1.16.15 |
| backupSecondaryDns The IP Address of the Secondary DNS Server to be used on the WAN uplink interface
of a Cellular Backhaul connection. This parameter is acquired dynamically in
DHCP mode and onl… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.2.1.16.16 |
| restoralTimer The WAN Restoral Timer is used to determine how long (in seconds)
the Fiber uplink interface must remain in an operational UP condition
before the Cellular Backup connection will … | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.2.1.16.2 |
| backupDataVlan This is the Internet Access VLAN (GEM 5xx), which is the only service
that can be backed up using the USB Cellular modem. | scalar | Unsigned32 | .1.3.6.1.4.1.5504.2.5.2.1.16.3 |
| cellularPinNumber A 4 digit PIN code used to unlock the SIM card. For GPRS/UMTS networks,
*99# is typically used. For CDMA/EVDO networks, #777 is typically used. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.4 |
| cellularDataNumber This is the number that the USB modem will dial to establish a cellular
a cellular data connection. For GPRS/UMTS networks, *99# is typically used.
For CDMA/EVDO networks, #777 is… | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.5 |
| atInitCommands AT initialization command strings, if needed. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.6 |
| accessPointName The Access Point Name (APN) for connections to the GPRS/UMTS network.
This should be provided by the ISP. In North America, 3G cellular carriers
do not require an APN. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.7 |
| chapPapUsername Required for CHAP or PAP authentication. This configuration item should
be left blank if CHAP or PAP is not used. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.8 |
| chapPapPassword Required for CHAP or PAP authentication. This configuration item should
be left blank if CHAP or PAP is not used. | scalar | OctetString | .1.3.6.1.4.1.5504.2.5.2.1.16.9 |