backupSecondaryDns

ZHNSYSTEM · .1.3.6.1.4.1.5504.2.5.2.1.16.16
MIB view Table view

Object

scalar r/w SNMPv2-SMIIpAddress 
The IP Address of the Secondary DNS Server to be used on the WAN uplink interface 
of a Cellular Backhaul connection.  This parameter is acquired dynamically in 
DHCP mode and only configurable if the BackupIpAddressMode is Static.

Context

MIB
ZHNSYSTEM
OID
.1.3.6.1.4.1.5504.2.5.2.1.16.16
Type
scalar
Access
readwrite
Status
current
Parent
zhnSystemWanBackupObjects
Siblings
15

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
failoverTimer
The WAN Failover Timer is used to determine how long (in seconds) the Fiber uplink interface must be operationally DOWN before a USB Cellular WAN Backup connection will be initiat…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.2.1.16.1
connectionTimeout
Specifies the duration of inactivity in seconds before the cellular data call will automatically terminate. A new call will be initiated automatically when a packet must be sent …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.2.1.16.10
backupIpAddressMode
The WAN IP Address, Default Gateway IP Address, Subnet Mask and DNS Server IP Address must all be defined for the USB Cellular Backup connection. When IP Address Mode is set to D…
scalarBasicAddressingTypeValues.1.3.6.1.4.1.5504.2.5.2.1.16.11
backupIpAddress
The IP Address to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIp…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.2.1.16.12
backupDefaultGateway
The IP Address of the Default Gateway to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only con…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.2.1.16.13
backupSubnetMask
The Subnet Mask to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupI…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.2.1.16.14
backupPrimaryDns
The IP Address of the Primary DNS Server to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only …
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.2.1.16.15
restoralTimer
The WAN Restoral Timer is used to determine how long (in seconds) the Fiber uplink interface must remain in an operational UP condition before the Cellular Backup connection will …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.2.1.16.2
backupDataVlan
This is the Internet Access VLAN (GEM 5xx), which is the only service that can be backed up using the USB Cellular modem.
scalarUnsigned32.1.3.6.1.4.1.5504.2.5.2.1.16.3
cellularPinNumber
A 4 digit PIN code used to unlock the SIM card. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is typically used.
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.4
cellularDataNumber
This is the number that the USB modem will dial to establish a cellular a cellular data connection. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is…
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.5
atInitCommands
AT initialization command strings, if needed.
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.6
accessPointName
The Access Point Name (APN) for connections to the GPRS/UMTS network. This should be provided by the ISP. In North America, 3G cellular carriers do not require an APN.
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.7
chapPapUsername
Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used.
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.8
chapPapPassword
Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used.
scalarOctetString.1.3.6.1.4.1.5504.2.5.2.1.16.9