accessPointName

ZHNSYSTEM · .1.3.6.1.4.1.5504.2.5.2.1.16.7

MIB view Table view

Object

scalar r/w OctetString

The Access Point Name (APN) for connections to the GPRS/UMTS network.
This should be provided by the ISP. In North America, 3G cellular carriers
do not require an APN.

Context

MIB: ZHNSYSTEM
OID: .1.3.6.1.4.1.5504.2.5.2.1.16.7
Type: scalar
Access: readwrite
Status: current
Parent: zhnSystemWanBackupObjects
Siblings: 15

Syntax

OctetString

Values & Constraints

Object Constraints

range: 0-32

Related Objects

Sibling Objects

Object	Type	Syntax	OID
failoverTimer The WAN Failover Timer is used to determine how long (in seconds) the Fiber uplink interface must be operationally DOWN before a USB Cellular WAN Backup connection will be initiat…	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.2.1.16.1`
connectionTimeout Specifies the duration of inactivity in seconds before the cellular data call will automatically terminate. A new call will be initiated automatically when a packet must be sent …	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.2.1.16.10`
backupIpAddressMode The WAN IP Address, Default Gateway IP Address, Subnet Mask and DNS Server IP Address must all be defined for the USB Cellular Backup connection. When IP Address Mode is set to D…	scalar	BasicAddressingTypeValues	`.1.3.6.1.4.1.5504.2.5.2.1.16.11`
backupIpAddress The IP Address to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupIp…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.2.1.16.12`
backupDefaultGateway The IP Address of the Default Gateway to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only con…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.2.1.16.13`
backupSubnetMask The Subnet Mask to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only configurable if the BackupI…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.2.1.16.14`
backupPrimaryDns The IP Address of the Primary DNS Server to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and only …	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.2.1.16.15`
backupSecondaryDns The IP Address of the Secondary DNS Server to be used on the WAN uplink interface of a Cellular Backhaul connection. This parameter is acquired dynamically in DHCP mode and onl…	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.5504.2.5.2.1.16.16`
restoralTimer The WAN Restoral Timer is used to determine how long (in seconds) the Fiber uplink interface must remain in an operational UP condition before the Cellular Backup connection will …	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.5504.2.5.2.1.16.2`
backupDataVlan This is the Internet Access VLAN (GEM 5xx), which is the only service that can be backed up using the USB Cellular modem.	scalar	Unsigned32	`.1.3.6.1.4.1.5504.2.5.2.1.16.3`
cellularPinNumber A 4 digit PIN code used to unlock the SIM card. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is typically used.	scalar	OctetString	`.1.3.6.1.4.1.5504.2.5.2.1.16.4`
cellularDataNumber This is the number that the USB modem will dial to establish a cellular a cellular data connection. For GPRS/UMTS networks, *99# is typically used. For CDMA/EVDO networks, #777 is…	scalar	OctetString	`.1.3.6.1.4.1.5504.2.5.2.1.16.5`
atInitCommands AT initialization command strings, if needed.	scalar	OctetString	`.1.3.6.1.4.1.5504.2.5.2.1.16.6`
chapPapUsername Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used.	scalar	OctetString	`.1.3.6.1.4.1.5504.2.5.2.1.16.8`
chapPapPassword Required for CHAP or PAP authentication. This configuration item should be left blank if CHAP or PAP is not used.	scalar	OctetString	`.1.3.6.1.4.1.5504.2.5.2.1.16.9`