zhnVlanType
ZHNLANDEVICE ·
.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14
Object
This object specifies the VLAN connection type of the interface.
Context
- MIB
- ZHNLANDEVICE
- OID
.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zhnIpInterfaceEntry
- Table
- zhnIpInterfaceTable
- Siblings
- 17
Syntax
ZHNLAYER2BRIDGINGVlanTypeValues
- Source
- ZHNLAYER2BRIDGINGVlanTypeValues
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipInterfaceIndex LAN IP Address Index | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1 |
| dhcpcPid If the address type is DHCP, then we will start a DHCP client
to get the IP address for this IP interface. The process ID (pid)
is stored in this field. A pid of 0 indicates that… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10 |
| dnsType This object specifies the DNS mode for this IP interface. The
DNS associates hostname-to-IP address, and so domain names and
IP addresses can be used interchangeably. Enumeration… | column | DNSTypeValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11 |
| primaryDnsIPAddress The DNS server primary IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12 |
| secondaryDnsIPAddress The DNS server secondary IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13 |
| connectionType This object specifies the connection type of the interface. | column | IpPppoeConnectionTypeValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15 |
| maxMTUSize The maximum size of IP packet that can be transmitted without
fragmentation - including IP headers but excluding headers
from lower levels in the protocol stack. The default MTU … | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16 |
| alternateWanIfName Name of a different VLAN WAN interface to run on if the current
VLAN WAN interface is set to unconfigured. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17 |
| naptEnabled This parameter enables or disables NAPT for this IP interface.
This parameter is configurable only if this interface is on an
uplink port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18 |
| ipInterfaceEnable Enables or disables this entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2 |
| ipInterfaceIPAddress IP address of the LAN-side interface of the CPE. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3 |
| ipInterfaceSubnetMask Subnet mask of the LAN-side interface of the CPE. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4 |
| ipInterfaceAddressingType Represents the addressing method used to assign the LAN-side
IP address of the CPE on this interface of the CPE. Enumeration
of:
DHCP
Static
Auto-IP | column | IPInterfaceAddressingTypeValues | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5 |
| ipInterfaceifName The interface name for this LAN device. | column | OctetString | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6 |
| firewallEnabled Indicates if a stateful firewall is enabled for all traffic from
this IP interface to the modem. If TRUE, all inbound local
traffic (from LAN to modem) that is not responding to … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7 |
| defaultGateway The IP address of the default gateway for this IP interface.
This parameter is configurable only if the AddressingType is
Static. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8 |
| natEnabled This parameter enables or disables NAT for this IP interface.
This parameter is configurable only if this interface is on an
uplink port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9 |