dhcpcPid

ZHNLANDEVICE · .1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
If the address type is DHCP, then we will start a DHCP client
to get the IP address for this IP interface.  The process ID (pid)
is stored in this field. A pid of 0 indicates that no dhcpc is running.

Context

MIB
ZHNLANDEVICE
OID
.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10
Type
column
Access
readonly
Status
current
Parent
zhnIpInterfaceEntry
Table
zhnIpInterfaceTable
Siblings
17

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ipInterfaceIndex
LAN IP Address Index
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1
dnsType
This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration…
columnDNSTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11
primaryDnsIPAddress
The DNS server primary IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12
secondaryDnsIPAddress
The DNS server secondary IP address.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13
zhnVlanType
This object specifies the VLAN connection type of the interface.
columnZHNLAYER2BRIDGINGVlanTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14
connectionType
This object specifies the connection type of the interface.
columnIpPppoeConnectionTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15
maxMTUSize
The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU …
columnUnsigned32.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16
alternateWanIfName
Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured.
columnOctetString.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17
naptEnabled
This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18
ipInterfaceEnable
Enables or disables this entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2
ipInterfaceIPAddress
IP address of the LAN-side interface of the CPE.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3
ipInterfaceSubnetMask
Subnet mask of the LAN-side interface of the CPE.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4
ipInterfaceAddressingType
Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP
columnIPInterfaceAddressingTypeValues.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5
ipInterfaceifName
The interface name for this LAN device.
columnOctetString.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6
firewallEnabled
Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is not responding to …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7
defaultGateway
The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8
natEnabled
This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9